Re: How do you stop a loop in installation?
- From: v-terliu@xxxxxxxxxxxxxxxxxxxx (Terence Liu [MSFT])
- Date: Fri, 10 Nov 2006 10:24:10 GMT
Hello David,
Thank you for kind update.
For the less feedback from you, I cannot judge what the root cause of this
issue is. So, please help to gather some more info for further
investigation:
1. In your description, you try again to install the SBS 2003 server, could
you let me know the installation is success or not? Is it still failed on
the last seven minutes approached 45 minutes?
2. What are you using bootable CD or floppy for?
3. Did you set your BIOS configuration and made it boot from hard disk?
4. Try to change your CD-ROM drives to see if the issue persists?
I appreciate your time and look forward to hearing from you. The info you
provided is very useful for further troubleshooting. Thank you very much
for your cooperation.
Thanks and have a nice day!
Best regards,
Terence Liu(MSFT)
Microsoft CSS Online Newsgroup Support
Get Secure! - www.microsoft.com/security
=====================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.
Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.
For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.
Any input or comments in this thread are highly appreciated.
=====================================================
This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
| From: David Sherman <dshermin@xxxxxxxxxxxxx>
| Subject: Re: How do you stop a loop in installation?
| Date: Thu, 09 Nov 2006 09:01:21 -0500
| Message-ID: <3sc6l2dpe48o1sag2ims5c7r0j1rd6sd9d@xxxxxxx>
| References: <t0l4l211dv19pruu0907glsjrgpp4iqs7h@xxxxxxx>
<jb8w#c#AHHA.4020@xxxxxxxxxxxxxxxxxxxxx>
| X-Newsreader: Forte Agent 2.0/32.640
| MIME-Version: 1.0
| Content-Type: text/plain; charset=us-ascii
| Content-Transfer-Encoding: 7bit
| Newsgroups: microsoft.public.windows.server.sbs
| NNTP-Posting-Host: adsl-68-75-27-67.dsl.wotnoh.ameritech.net 68.75.27.67
| Lines: 1
| Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTNGP03.phx.gbl
| Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.server.sbs:311389
| X-Tomcat-NG: microsoft.public.windows.server.sbs
|
| Right now, I am starting again with the installation.
|
| I finally got a floppy to work.
|
| I am starting again.
|
| I thoughts right now is the SBS 2003 install CD is bad.
|
|
| On Thu, 09 Nov 2006 10:10:10 GMT, v-terliu@xxxxxxxxxxxxxxxxxxxx
| (Terence Liu [MSFT]) wrote:
|
| >Hello David,
| >
| >Thank you for posting here.
| >
| >Before we go any further, please let me know the following information
so
| >that we can understand your situation more clearly.
| >
| >1. As you mentioned "installation was stopped when the time on the last
| >seven minutes approached 45 minutes." Could you please let me know what
| >installation it is (SBS integrated components installation or other
| >software installations)?
| >
| >2. As you mentioned "Every time I tried to use a bootable cd, the setup
| >would start again." Can I assume the bootable cd is the SBS CD1? If it
is
| >not the case, if you inset any bootable CD in the Server, the
appropriate
| >setup program from the bootable CD will start again. Based on my
| >experience, this issue may occur if you configure the server boot from
| >CDROM first, rather than hard disk in the BIOS. Please re-configure the
| >server's BIOS to let it boot from hard disk first.
| >
| >Note: If you any questions for BIOS configuration, please contact your
| >hardware vendor for support. Thank you for your understanding!
| >
| >3. Did you complete the SBS all components installation?
| >
| >4. If above scenarios are not your case, please let me know the exact
| >problem symptom for further analysis.
| >
| > Thanks and have a nice day!
| >
| >Best regards,
| >
| >Terence Liu(MSFT)
| >
| >Microsoft CSS Online Newsgroup Support
| >
| >Get Secure! - www.microsoft.com/security
| >
| >=====================================================
| >This newsgroup only focuses on SBS technical issues. If you have issues
| >regarding other Microsoft products, you'd better post in the
corresponding
| >newsgroups so that they can be resolved in an efficient and timely
manner.
| >You can locate the newsgroup here:
| >http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
| >
| >When opening a new thread via the web interface, we recommend you check
the
| >"Notify me of replies" box to receive e-mail notifications when there
are
| >any updates in your thread. When responding to posts via your
newsreader,
| >please "Reply to Group" so that others may learn and benefit from your
| >issue.
| >
| >Microsoft engineers can only focus on one issue per thread. Although we
| >provide other information for your reference, we recommend you post
| >different incidents in different threads to keep the thread clean. In
doing
| >so, it will ensure your issues are resolved in a timely manner.
| >
| >For urgent issues, you may want to contact Microsoft CSS directly.
Please
| >check http://support.microsoft.com for regional support phone numbers.
| >
| >Any input or comments in this thread are highly appreciated.
| >=====================================================
| >
| >This posting is provided "AS IS" with no warranties, and confers no
rights.
| >
| >--------------------
| >| From: David Sherman <dshermin@xxxxxxxxxxxxx>
| >| Subject: How do you stop a loop in installation?
| >| Date: Wed, 08 Nov 2006 17:10:50 -0500
| >| Message-ID: <t0l4l211dv19pruu0907glsjrgpp4iqs7h@xxxxxxx>
| >| X-Newsreader: Forte Agent 2.0/32.640
| >| MIME-Version: 1.0
| >| Content-Type: text/plain; charset=us-ascii
| >| Content-Transfer-Encoding: 7bit
| >| Newsgroups: microsoft.public.windows.server.sbs
| >| NNTP-Posting-Host: adsl-68-250-176-152.dsl.wotnoh.ameritech.net
| >68.250.176.152
| >| Lines: 1
| >| Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTNGP04.phx.gbl
| >| Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.server.sbs:311275
| >| X-Tomcat-NG: microsoft.public.windows.server.sbs
| >|
| >| How do you stop a look when a SBS 2003 fails?
| >|
| >| In my case, installtion was stopped when the the time on the last
| >| seven minutes approached 45 minutes. Evey time I tried to use a
| >| bootable cd, the setup would start again.
| >|
| >| How do you stop this when all you have are cd's and no floppies?
| >|
| >| thanks
| >|
|
|
.
- Follow-Ups:
- Re: How do you stop a loop in installation?
- From: David Sherman
- Re: How do you stop a loop in installation?
- References:
- How do you stop a loop in installation?
- From: David Sherman
- RE: How do you stop a loop in installation?
- From: Terence Liu [MSFT]
- Re: How do you stop a loop in installation?
- From: David Sherman
- How do you stop a loop in installation?
- Prev by Date: Strange LDAP email address users
- Next by Date: Re: SBS DHCP Service Install
- Previous by thread: Re: How do you stop a loop in installation?
- Next by thread: Re: How do you stop a loop in installation?
- Index(es):
Relevant Pages
|
