Re: How do you stop a loop in installation?

Right now, I am starting again with the installation.

I finally got a floppy to work.

I am starting again.

I thoughts right now is the SBS 2003 install CD is bad.


On Thu, 09 Nov 2006 10:10:10 GMT, v-terliu@xxxxxxxxxxxxxxxxxxxx
(Terence Liu [MSFT]) wrote:

Hello David,

Thank you for posting here.

Before we go any further, please let me know the following information so
that we can understand your situation more clearly.

1. As you mentioned "installation was stopped when the time on the last
seven minutes approached 45 minutes." Could you please let me know what
installation it is (SBS integrated components installation or other
software installations)?

2. As you mentioned "Every time I tried to use a bootable cd, the setup
would start again." Can I assume the bootable cd is the SBS CD1? If it is
not the case, if you inset any bootable CD in the Server, the appropriate
setup program from the bootable CD will start again. Based on my
experience, this issue may occur if you configure the server boot from
CDROM first, rather than hard disk in the BIOS. Please re-configure the
server's BIOS to let it boot from hard disk first.

Note: If you any questions for BIOS configuration, please contact your
hardware vendor for support. Thank you for your understanding!

3. Did you complete the SBS all components installation?

4. If above scenarios are not your case, please let me know the exact
problem symptom for further analysis.

Thanks and have a nice day!

Best regards,

Terence Liu(MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

=====================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.
=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------
| From: David Sherman <dshermin@xxxxxxxxxxxxx>
| Subject: How do you stop a loop in installation?
| Date: Wed, 08 Nov 2006 17:10:50 -0500
| Message-ID: <t0l4l211dv19pruu0907glsjrgpp4iqs7h@xxxxxxx>
| X-Newsreader: Forte Agent 2.0/32.640
| MIME-Version: 1.0
| Content-Type: text/plain; charset=us-ascii
| Content-Transfer-Encoding: 7bit
| Newsgroups: microsoft.public.windows.server.sbs
| NNTP-Posting-Host: adsl-68-250-176-152.dsl.wotnoh.ameritech.net
68.250.176.152
| Lines: 1
| Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTNGP04.phx.gbl
| Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.server.sbs:311275
| X-Tomcat-NG: microsoft.public.windows.server.sbs
|
| How do you stop a look when a SBS 2003 fails?
|
| In my case, installtion was stopped when the the time on the last
| seven minutes approached 45 minutes. Evey time I tried to use a
| bootable cd, the setup would start again.
|
| How do you stop this when all you have are cd's and no floppies?
|
| thanks
|

.

Relevant Pages

  • Re: Applying SBS SP1 at this late date
    ... If you had already installed Exchange server 2003 sp2 on the SBS before you ... You can just jump over the exchange sp1 installation step ... Microsoft CSS Online Newsgroup Support ... you may want to contact Microsoft CSS directly. ...
    (microsoft.public.windows.server.sbs)
  • Re: How do you stop a loop in installation?
    ... In your description, you try again to install the SBS 2003 server, could ... This newsgroup only focuses on SBS technical issues. ... you may want to contact Microsoft CSS directly. ... | Subject: Re: How do you stop a loop in installation? ...
    (microsoft.public.windows.server.sbs)
  • Re: SBS 2003 Fax Sharepoint Routing
    ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ... it means that the installation didn''t go ...
    (microsoft.public.windows.server.sbs)
  • RE: Windows 2003 Setup fails on component 25 in add or remove prog
    ... > Welcome to SBS newsgroup. ... > I understand that you encountered some problem when running SBS wizard. ... > installation of SBS 2003 setup. ... > Please note that you also need to apply SBS 2003 SP1 not only the Windows ...
    (microsoft.public.windows.server.sbs)
  • Re: How do you stop a loop in installation?
    ... This newsgroup only focuses on SBS technical issues. ... you may want to contact Microsoft CSS directly. ... | Subject: Re: How do you stop a loop in installation? ...
    (microsoft.public.windows.server.sbs)