Re: Outlook RPC over HTTP

Tech-Archive recommends: Fix windows errors by optimizing your registry

Thank you for all your help, I will repost.

THanks
B

"Lanwench [MVP - Exchange]"
<lanwench@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:Ot34Nm69GHA.3344@xxxxxxxxxxxxxxxxxxxxxxx
In news:uWvGHl49GHA.5092@xxxxxxxxxxxxxxxxxxxx,
Ben <Ben@xxxxxxxxxxxxxxxxxxxxxxxx> typed:
Hi Lanwench,

Thanks for your post.

Sorry yes we are using ISA, I have rerun CEICW and ensured that
Outlook over the Internet is checked.

Great. Well, unfortunately, I am not an ISA person at all - since this
thread is getting a bit stale, I suggest you post a new, concise message -
"I've run CEICW, have my SSL cert set up to match my public DNS A record
for my IP, followed all the steps in RWW, and can't get through" - and put
something useful in the subject line, like "RPC over HTTP through ISA
config probs" ?

Sorry I can't help further....



Thanks
B

"Lanwench [MVP - Exchange]"
<lanwench@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message news:O4vLYX49GHA.1200@xxxxxxxxxxxxxxxxxxxxxxx
In news:%230CHAK49GHA.4524@xxxxxxxxxxxxxxxxxxxx,
Ben <Ben@xxxxxxxxxxxxxxxxxxxxxxxx> typed:
Hi Lanwench,

Tried another machine on the outside of the LAN with no luck again.

Thanks
B

OK - but are you using ISA? I don't use it, so I can't tell you much
about it.

Oh - and I forgot to ask the most obvious thing of all, I
think.....did you enable this access when you ran the CEICW? If not,
rerun it - and select the obvious. Even if you *did* select it,
rerun the CEICW.

"Lanwench [MVP - Exchange]"
<lanwench@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message news:eqXB2S39GHA.2300@xxxxxxxxxxxxxxxxxxxxxxx
In news:O74TEds9GHA.4644@xxxxxxxxxxxxxxxxxxxx,
Ben <Ben@xxxxxxxxxxxxxxxxxxxxxxxx> typed:
Hi Lanwench

Thanks for your post.

I have tested another workstation connected to the LAN with no
success.
Thanks
B

Try this *outside* the LAN?
I'm not an ISA person, but I suspect this is an ISA issue.


...also, please don't snip out all the quoted text when you reply,
as it makes it very difficult to follow the thread. Thanks.





.

Relevant Pages

  • Re: Changing ISPs
    ... Run the CEICW, Connect the router, change the LAN NIC by running the change ... Then install the edge device but leave ISA in place. ... SMTP mail for Exchange ... removed his e-mail account in Outlook and reinstalled and still no luck. ...
    (microsoft.public.windows.server.sbs)
  • Re: Outlook RPC over HTTP
    ... Sorry yes we are using ISA, I have rerun CEICW and ensured that Outlook over ... Tried another machine on the outside of the LAN with no luck again. ... OK - but are you using ISA? ...
    (microsoft.public.windows.server.sbs)
  • Re: Changing ISPs
    ... Then install the edge device but leave ISA in place. ... Run the CEICW and set the all the ip addresses and the default email ... I would look at the SMTP properties of the userwho cannot receive ... Exchange will not be held anywhere, so a POP connector will not retrieve ...
    (microsoft.public.windows.server.sbs)
  • Re: SBS 2003 / ISA / IIS / DNS - works sometimes?
    ... If the BPA is complaining, ... You should not disable the firewall during CEICW, please rerun it and enable ... I'm beginning to suspect that this might be an ISA issue. ...
    (microsoft.public.windows.server.sbs)
  • Re: ISA issue - CEICW errors -
    ... I understand that you unable to run CEICW ... I suggest you uninstall the ISA, change the IP, run the CEICW, install the ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ...
    (microsoft.public.windows.server.sbs)