RE: w32time Event ID 29

Tech-Archive recommends: Fix windows errors by optimizing your registry

Hello Crina

I have tried other time servers. No change to the problem. I have also trie
other time servers using Atomic Clock Sync v2.7.0.3 and all work OK with this
program.

I'lll read
816042 How to configure the Windows Time service on a Windows Server
2003-based
http://support.microsoft.com/?id=816042

307897 How To Synchronize the Time with the Windows Time Service in Windows
XP
http://support.microsoft.com/?id=307897

Tomorow.

Thanks for staying with me on this.
Russell


""Crina Li"" wrote:

Hi Russell,

Thanks for your update.

Have you tried other time sources?

262680 A List of the Simple Network Time Protocol Time Servers That Are
http://support.microsoft.com/?id=262680

Also please refer to the following KB article to reconfigure the Windows
Time service to see how thing goes:

816042 How to configure the Windows Time service on a Windows Server
2003-based
http://support.microsoft.com/?id=816042

307897 How To Synchronize the Time with the Windows Time Service in Windows
XP
http://support.microsoft.com/?id=307897

Thanks for your time and I look forward to hearing from you.

Best regards,

Crina Li (MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

=====================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.

=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
| Thread-Topic: w32time Event ID 29
| thread-index: Acb24FeQc4OxrxGETvOMoWF86PVpLQ==
| X-WBNR-Posting-Host: 203.109.245.62
| From: =?Utf-8?B?UnVzc2VsbDM=?= <Russell3@xxxxxxxxxxxxxxxxxxxxxxxxx>
| References: <93730183-3302-4EBE-84AF-E908F5FFD484@xxxxxxxxxxxxx>
<Nbuyyen9GHA.1472@xxxxxxxxxxxxxxxxxxxxx>
| Subject: RE: w32time Event ID 29
| Date: Mon, 23 Oct 2006 13:18:02 -0700
| Lines: 232
| Message-ID: <28C42DFB-3915-452F-9864-438701077F35@xxxxxxxxxxxxx>
| MIME-Version: 1.0
| Content-Type: text/plain;
| charset="Utf-8"
| Content-Transfer-Encoding: 7bit
| X-Newsreader: Microsoft CDO for Windows 2000
| Content-Class: urn:content-classes:message
| Importance: normal
| Priority: normal
| X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.1830
| Newsgroups: microsoft.public.windows.server.sbs
| Path: TK2MSFTNGXA01.phx.gbl
| Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.server.sbs:307283
| NNTP-Posting-Host: TK2MSFTNGXA01.phx.gbl 10.40.2.250
| X-Tomcat-NG: microsoft.public.windows.server.sbs
|
| Hi Crina. Thanks for your time and advice.
|
| A. Time Service enabled and started. Yes - verified initialli and after
D.
| below.
|
| B. IS is not installed. Control Panel->Add/Remove programs. The list
| produced does not include "Microsoft Internet Security and Acceleration
| Server", so ISA is not present.
|
| C. Re-Configure. Did that and all commands completed successfully. Still
| getting error ID 29 (wait 5 min after the action and the errro shows
again on
| the System Event Viewer)
|
| E. Hot fix 830092. THis was installed months ago and shows up in the
Control
| Panel->add/Remove programs list.
|
| D. H/W router/firewall.
| We have an adsl router, the gateway.
| The Type value was NTP. Changing it to Nt5DS had no effect.
|
| So I have no progress.
| Any other suggestions?
|
| Kind regards
| Russell
|
|
| ""Crina Li"" wrote:
|
| > Hi Russell,
| >
| > Thank you for posting in SBS newsgroup.
| >
| > I am sorry for the delayed response due to weekend. Please understand
that
| > the newsgroups are staffed weekdays by Microsoft Support professionals
to
| > answer your systems and applications questions. Your understanding is
| > greatly appreciated!
| >
| > From your description, I understand the issue to be: you receive event
29
| > regarding w32time. If I have misunderstood your concerns, please do not
| > hesitate to let me know.
| >
| > Based on my experience, I would like to suggest you try the following
| > suggestions:
| >
| > A. Make sure the Windows Time service is enabled and started
| > ------------------------
| > The Windows Time service will be disabled by CEICW when you have a
PPPoE
| > connection which is treated as a non-stable connection. I suggest you
click
| > Start->Run, type "services.msc" (without the quotes) and click OK. When
the
| > Services snap-in opens, check to make sure the Windows Time service is
| > started and its startup type is set to "Automatic".
| >
| > B: Make sure ISA is allowing the NTP traffic on UDP port 123 (if you
have
| > ISA installed)
| > ------------------------
| > If you have ISA server 2000 installed on the SBS 2003 server, please
| > perform the following steps to configure ISA:
| >
| > 1. In the ISA Server management tool, expand the management nodes that
are
| > beneath your server name.
| >
| > 2. Expand the Access Policy branch to view the list of access policies.
| >
| > 3. Right-click IP Packet Filters, point to New, and then click Filter
to
| > start the New IP Packet Filter Wizard.
| >
| > 4. Type a descriptive name for the filter (such as "SNTP Allow Filter"
| > (without the quotation marks)), and then click Next.
| >
| > 5. Click Allow packet transmission as the Filter Mode, and then click
Next.
| >
| > 6. Click Custom as the filter type, and then click Next.
| >
| > 7. On the Filter Settings page, click UDP for the IP protocol, click
"Send
| > receive" for the direction, "All ports" as the local port, click "Fixed
| > port" as the remote port, use port 123 as the remote port number, and
then
| > click Next.
| >
| > 8. Keep the default settings by clicking Next through the next two
wizard
| > pages, and then click Finish at the Completing The New IP Packet Filter
| > Wizard page.
| >
| > 9. Go to Monitoring\Services and restart the Firewall service. Check if
the
| > issue disappears.
| >
| > For more info, see:
| >
| > 323621 How To Configure the Simple Network Time Protocol (SNTP) on ISA
| > Server
| > http://support.microsoft.com/?id=323621
| >
| > 887355 The server cannot synchronize with an external time source after
you
| > run the Configure E-mail and Internet Connection Wizard on Windows
Small
| > Business Server 2003
| > http://support.microsoft.com/default.aspx?scid=kb;EN-US;887355
| >
| > If it is ISA 2004, open the ISA management console, go to Firewall
Policy,
| > right click the "SBS Local Host Access Rule" in the right panel, and
select
| > Properties. Go to Protocols tab to make sure NTP (UDP) is added.
| >
| > C. Re-configure the Windows Time service
| > ------------------------
| > Open a command prompt and run the following commands to re-configure
the
| > time service to sync time with time.nist.gov:
| >
| > w32tm /config /manualpeerlist:time.nist.gov,0x8 /syncfromflags:MANUAL
| >
| > w32tm /config /update
| >
| > net stop w32time
| >
| > net start w32time
| >
| > D. Make sure the hardware router or firewall is allowing the traffic
| > ------------------------
| > Check if you have a hardware router/firewall in front of your SBS
server,
| > if so, please open Registry Editor (regedit), go to
| >
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Parameters\Type
| > , change the value data from whatever to Nt5DS and restart the W32Time
| > service. Maue sure the service's startup type is till set to automatic.
| >
| > For more info:
| >
| > 816042 How to configure the Windows Time service on a Windows Server
| > 2003-based
| > http://support.microsoft.com/?id=816042
| >
| > You can also try other time sources.
| >
| > 262680 A List of the Simple Network Time Protocol Time Servers That Are
| > http://support.microsoft.com/?id=262680
| >
| > E. Ask and apply the hot fix 830092
| > ------------------------
| > Please contact Microsoft PSS to obtain and install the following hot
fix:
| >
| > 830092 W32Time frequently logs Event ID 50 and poor time
synchronization
| > occurs
| > http://support.microsoft.com/?id=830092
| >
| > I appreciate your time and look forward to hearing from you.
| >
| > Best regards,
| >
| > Crina Li (MSFT)
| >
| > Microsoft CSS Online Newsgroup Support
| >
| > Get Secure! - www.microsoft.com/security
| >
| > =====================================================
| > This newsgroup only focuses on SBS technical issues. If you have issues
| > regarding other Microsoft products, you'd better post in the
corresponding
| > newsgroups so that they can be resolved in an efficient and timely
manner.
| > You can locate the newsgroup here:
| > http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
| >
| > When opening a new thread via the web interface, we recommend you check
the
| > "Notify me of replies" box to receive e-mail notifications when there
are
| > any updates in your thread. When responding to posts via your
newsreader,
| > please "Reply to Group" so that others may learn and benefit from your
| > issue.
| >
| > Microsoft engineers can only focus on one issue per thread. Although we
| > provide other information for your reference, we recommend you post
| > different incidents in different threads to keep the thread clean. In
doing
| > so, it will ensure your issues are resolved in a timely manner.
| >
| > For urgent issues, you may want to contact Microsoft CSS directly.
Please
| > check http://support.microsoft.com for regional support phone numbers.
| >
| > Any input or comments in this thread are highly appreciated.
| >
| > =====================================================
| >
| > This posting is provided "AS IS" with no warranties, and confers no
rights.
| > --------------------
| > | Thread-Topic: w32time Event ID 29
| > | thread-index: Acb2ITwKoxtvLbDeTkmV3PKopdMKxw==
| > | X-WBNR-Posting-Host: 203.109.245.62
| > | From: =?Utf-8?B?UnVzc2VsbDM=?= <Russell3@xxxxxxxxxxxxxxxxxxxxxxxxx>
| > | Subject: w32time Event ID 29
| > | Date: Sun, 22 Oct 2006 14:30:02 -0700
.

Relevant Pages

  • Re: Email enable doc lib
    ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ... navigate to the public folder and send some posts with attachments to the ... I have disabled forms base Athentication from the default V.Smtp server ...
    (microsoft.public.windows.server.sbs)
  • Re: Cant logon from workstation as Administrator
    ... server box and let me know if there is any problem related to the issue. ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ... be able to logon using ANY accounts from that workstation. ...
    (microsoft.public.windows.server.sbs)
  • RE: w3wp.exe unable to start properly and mail delivery very slow
    ... I will be here waiting for your updates, please feel free to post back. ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ... |> internal NIC as the DNS server on both client computer and SBS server. ...
    (microsoft.public.windows.server.sbs)
  • Re: Nagging Autorization issue for Companyweb after ISA04 install
    ... Check the companyweb CNAME entry in the DNS Server. ... Does the situation occur when you access companyweb from the ISA ... > 'Microsoft Firewall' service. ... > This newsgroup only focuses on SBS technical issues. ...
    (microsoft.public.windows.server.sbs)
  • Re: Email enable doc lib
    ... server to test the issue. ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ... Please try to logon Public folder list using URL: ...
    (microsoft.public.windows.server.sbs)