RE: Pop3 messages not delivered
- From: v-chacez@xxxxxxxxxxxxx (chace zhang)
- Date: Fri, 15 Sep 2006 04:04:27 GMT
Hi
Thank you for posting here.
From your post, I understand this issue is e-mail messages are notdelivered with the SBS 2003 Connector for POP3 Mailboxes.
Since your have checked emails have downloaded to pop3 mailbox. Please
check whether the following event has be logged in Event Viewer:
Event Type: Warning
Event Source: POP3 Connector
Event Category: Delivery
Event ID: 1070 Description:
An attempt to relay e-mail to recipient <SMTPAddress> was made. The e-mail
could not be delivered because the recipient's e-mail domain name does not
match any local e-mail domains.
If this is your case, please perform the following steps to solve this
question.
Firstly add the POP3 e-mail address as a secondary SMTP address in the
Exchange default recipient policy.
1. Click Start, point to All Programs, point to Microsoft Exchange, and
then click System Manager.
2. Expand Recipients, and then click Recipient Policies.
3. In the right pane, right-click the Default Policy, and then click
Properties.
4. Click the E-Mail Addresses (Policy) tab.
5. Verify that the local domain name appears in the SMTP address and that
you do not have an SMTP address configured for an external domain, such as
an ISP's domain name.
6. Click New, click SMTP Address, and then click OK.
7. Type the POP3 e-mail address, such as @MyISP.com
8. Click to clear This Exchange Organization is responsible for all mail
delivery to this address.
9. Click OK.
10. Click to check the SMTP address you created in step 9.
Note Do not click Set as Primary.
11. Click OK, click Yes, and then click Yes.
12. Quit Exchange System Manager.
After that, restart IIS services. Click Start, click Run, and then type
cmd. At the command prompt type iisreset, and then press ENTER
Secondly, Configure the primary e-mail address for the POP3 users
If only a few users want their primary e-mail address to match their POP3
e-mail address, you can change these user accounts individually. To change
the user accounts individually, follow these steps:
1. Click Start, click All Programs, click Administrative Tools, and then
click Active Directory Users and Computers.
2. Expand the container where the user accounts are located, right-click
the user who you want, and then click Properties.
3. Click the E-mail Addresses tab, and then click to clear Automatically
update e-mail addresses based on recipient policy.
4. Click the POP3 e-mail address, click Set as Primary, and then click OK.
5. Quit Active Directory Users and Computers.
Hope this helps. I look forward to your update.
Have a nice day!
Best Regards,
Chace Zhang (MSFT)
Microsoft CSS Online Newsgroup Support
Get Secure! - www.microsoft.com/security
=====================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.
Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.
For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.
Any input or comments in this thread are highly appreciated.
=====================================================
This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
| Thread-Topic: Pop3 messages not delivered
| thread-index: AcbYDFvoZeo163gST6ir9Q44Tn35lA==
| X-WBNR-Posting-Host: 63.138.27.90
| From: =?Utf-8?B?Q2hyaXN0aWFuIFBhbGU=?=
<ChristianPale@xxxxxxxxxxxxxxxxxxxxxxxxx>
| Subject: Pop3 messages not delivered
| Date: Thu, 14 Sep 2006 07:45:02 -0700
| Lines: 11
| Message-ID: <9B2201D6-D85E-4161-8A52-F534471EF400@xxxxxxxxxxxxx>
| MIME-Version: 1.0
| Content-Type: text/plain;
| charset="Utf-8"
| Content-Transfer-Encoding: 7bit
| X-Newsreader: Microsoft CDO for Windows 2000
| Content-Class: urn:content-classes:message
| Importance: normal
| Priority: normal
| X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.1830
| Newsgroups: microsoft.public.windows.server.sbs
| Path: TK2MSFTNGXA01.phx.gbl
| Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.server.sbs:297522
| NNTP-Posting-Host: TK2MSFTNGXA01.phx.gbl 10.40.2.250
| X-Tomcat-NG: microsoft.public.windows.server.sbs
|
| I added a new domain to exchange, used the pop connector to retreive the
| email off the old host. The emails were retreived and deleted from the
old
| host. However, they were never delivered to the specified recipient. I
can
| see the messages in the message tracking center under recipient
| "mspop3connector.(usersemailadddress)". The last event logged for the
| missing emails is SMTP: Message submitted to categorizer. I checked my
Trend
| Micro logs and the messages don't seem to be intercepted by their
filters.
|
| Where did these missing emails go and how do I retreive them?
|
| Thanks so much!
|
.
- Prev by Date: RE: ISA 2004 REPORT FAILURE
- Next by Date: Re: replication fails
- Previous by thread: RE: No Storage space, whats the best way for upgrade?
- Next by thread: Re: SBS 2000 Moving Exchange Logs etc
- Index(es):
Relevant Pages
|
