Re: Internet on nodes

Rajiv,

was hoping you'd come back with some results. I need to crash, get some
sleep. If you are still having problems I would next look to another run of
the CEICW and then check the binding order of the NICs (Internal should be
first).

Way I've been sleeping lately I'll probably be back here in a few hours.
Thread looks like you've been dealing with this for 15+ days. I hope to
help.

g'nite

"SuperGumby [SBS MVP]" <not@xxxxxxxxxxx> wrote in message
news:OxcBJ3B0GHA.4228@xxxxxxxxxxxxxxxxxxxxxxx
BTW, router should be connected to 2nd NIC during this procedure.

"SuperGumby [SBS MVP]" <not@xxxxxxxxxxx> wrote in message
news:u9n1q0B0GHA.1256@xxxxxxxxxxxxxxxxxxxxxxx
OK, my apologies.

We need to go back to basics. (and I'm still somewhat intrigued about the
motivation on the domain.local vs local.lan item, but I think it's
picking it up via DHCP from your router, interesting rather than
critical).

Shutdown all attached devices except the SBS itself, your internet router
and your network switch. Restart SBS. Run the 'Change Server IP Address'
wizard from the 'Internet and E-mail' section of the SBS console, putting
the server into a different local subnet. You are curently using .16 for
local and .1 for router, 3rd octet, make the 3rd octet anything other
than these. If you want the server back in .16 run the same wiz again and
put it back.

Report any errors. If no errors, start a workstation and post the
IPconfig from both SBS and WS (I know, they will be similar to previous
posted info, bear with me please.)

"Rajiv K Khandelwal" <rajiv@xxxxxxxxxxx> wrote in message
news:%23za4WqB0GHA.3908@xxxxxxxxxxxxxxxxxxxxxxx
I have completed all the items in the "To Do List" but am not getting
anywhere.

Was myself surprised when the support staff at Microsoft said it is not
possible to share the Internet with the workstations.

Regards,

Rajiv K. Khandelwal


"SuperGumby [SBS MVP]" <not@xxxxxxxxxxx> wrote in message
news:OkztPmB0GHA.5048@xxxxxxxxxxxxxxxxxxxxxxx
Rajiv has not completed SBS setup (I'll bet) otherwise he would not
have manual control of the windows firewall.

I'm also curious about the motivation to somehow have arrived at a
situation where the box is in two DNS 'areas' (deliberate avoidance of
'domain'), domain.local and local.lan (from the most recent IPConfig),
a very unusual situation.

I may be wrong and if so apologise to Rajiv in advance but believe he
may not have completed SBS Setup in the standard manner.

Rajiv,
do you have a link from the start button 'Server Management'? and if
so and you choose this do you get a list which includes 'To Do List"?
If so, have you completed all items in the 'To Do List"?

"Merv Porter [SBS-MVP]" <mwport@xxxxxxxxxxxxxxxxxxx> wrote in message
news:%23NOlLVB0GHA.4408@xxxxxxxxxxxxxxxxxxxxxxx
Contacted Microsoft support and was told that SBS 2003 does not have
internet sharing feature

Of course, this isn't true. SBS 2003 does allow Internet access for
workstations and is configured through CEICW (Configure Email nad
Internet Connection Wizard). It does not use ICS (Internet Connection
Sharing).

--
Merv Porter [SBS-MWP]
============================

"Rajiv K Khandelwal" <rajiv@xxxxxxxxxxx> wrote in message
news:etF%23WC$zGHA.4176@xxxxxxxxxxxxxxxxxxxxxxx
Thanks to your support for my problem. During the weekend, I
installed Exchange and tried all permutations but still I was not
able to get the internet on the nodes.

Contacted Microsoft support and was told that SBS 2003 does not have
internet sharing feature and hence the nodes are not able to connect
to it. This really surprised me as I was able to do that before the
formatting of my server machine.

Till the issue is resolved I have connected the router to the switch
and changed IP of the server LAN card to be in sync with the router
IP and am able to access the internet both at the server and the
nodes.

Regards,

Rajiv K. Khandelwal

"Rajiv K Khandelwal" <rajiv@xxxxxxxxxxx> wrote in message
news:OtAQSBsxGHA.1256@xxxxxxxxxxxxxxxxxxxxxxx
I have not disabled the ISA Firewall but had to turn OFF the Windows
Firewall on the Server. The workstation Windows Firewall is
controlled by the Server group policy. I have no idea of the ISA
firewall software on the workstations.

Regards,

Rajiv K. Khandelwal

"Merv Porter [SBS-MVP]" <mwport@xxxxxxxxxxxxxxxxxxx> wrote in
message news:uD7hYfqxGHA.4240@xxxxxxxxxxxxxxxxxxxxxxx
If the firewall in enabled then nodes do not log onto the server
and no programme runs

So you're saying that you've disabled the ISA firewall on the
server to allow the workstations to access the server? If so, did
you also disable the ISA firewall software on the workstations?

--
Merv Porter [SBS-MWP]
============================


"Rajiv K Khandelwal" <rajiv@xxxxxxxxxxx> wrote in message
news:%23gw$TrmxGHA.1304@xxxxxxxxxxxxxxxxxxxxxxx
Merv,

I do not get any error message. If the firewall in enabled then
nodes do not log onto the server and no programme runs. DHCP is
enabled for the entire network.

Regards,

Rajiv K. Khandelwal

"Merv Porter [SBS-MVP]" <mwport@xxxxxxxxxxxxxxxxxxx> wrote in
message news:%23Vss5vhxGHA.4960@xxxxxxxxxxxxxxxxxxxxxxx
If you run CEICW, enable the firewall, select the services and
complete CEICW, what errors do you get (if any)?

And the SBS server is handling the DHCP service for the entire
network, right?

--
Merv Porter [SBS-MWP]
============================

"Rajiv K Khandelwal" <rajiv@xxxxxxxxxxx> wrote in message
news:O$HrXZfxGHA.1592@xxxxxxxxxxxxxxxxxxxxxxx
Merv,

Thanks for your post. As suggested by you, on one workstation, I
unjoined and then rejoin it to the domain without any success.

Regards,

Rajiv K. Khandelwal

"Merv Porter [SBS-MVP]" <mwport@xxxxxxxxxxxxxxxxxxx> wrote in
message news:uveRSGexGHA.4192@xxxxxxxxxxxxxxxxxxxxxxx
After you reinstalled, did you unjoin the workstations from the
domain and then rejoin them? If not, try it with one
workstation.

--
Merv Porter [SBS-MWP]
============================

"Rajiv K Khandelwal" <rajiv@xxxxxxxxxxx> wrote in message
news:ONzawVaxGHA.5040@xxxxxxxxxxxxxxxxxxxxxxx
You are absolutely right that the diagram reflects my physical
network setup but still am not able to access internet on the
nodes.
Do I have to open some ports in the firewall?
Do I have to adjust some settings in the firewall?
Should I disable the firewall and observe?

Regards,

Rajiv K. Khandelwal

"Merv Porter [SBS-MVP]" <mwport@xxxxxxxxxxxxxxxxxxx> wrote in
message news:%23e2n%23qRxGHA.4484@xxxxxxxxxxxxxxxxxxxxxxx
Does the following diagram reflect your physical network
setup?
http://www.smallbizserver.net/Default.aspx?tabid=266&ArticleType=ArticleView&ArticleID=74

Also, on the external NIC, change the IP address to static
and not dynamic (you don't want the IP address of the
external NIC to change unexpectly).

--
Merv Porter [SBS-MWP]
============================

"Rajiv K Khandelwal" <rajiv@xxxxxxxxxxx> wrote in message
news:eghaLMPxGHA.1284@xxxxxxxxxxxxxxxxxxxxxxx
Thanks to Merv and Jesmin for your valuable guidance. I have
SBS 2003 SP 1 Premium Edition and have followed your advice.
The new IPConfig of the server and node are attached herewith
for your approval.

Though I am able to get the internet on the server, I am not
getting it on the nodes and am not able to access the
microsoft sites on the server.

Have included the DHCP values for your kind perusal.

Regards,

Rajiv K. Khandelwal
























.