Re: Unsure of what to do...

I wouldn't try to do it that way - I'm not sure what the result would be.
You should be able to extract the necessary drivers from the CD, or download
them from the Dell site. As for not having a 3.5" drive - an inexpensive USB
floppy drive will do just fine. I keep one in the server room, in a ziplock
bag, for just such uses.

--
Charlie.
http://msmvps.com/xperts64


Jeff Teel wrote:
No... I don't have any drivers on a floppy. They are all on the Dell
restore CD that came with the system and I have no 3 1/2 drive either.
When you mentioned in your earlier post that " (USB key and/or CD will
NOT do!) for installing drivers I wondered how everything worked when I
did the restore on my system if using the CD drive would not work. I'm a
little slow with this I guess! Could I start the install with the Dell
restore CD (without SP1) that also contains the RAID drivers then finish
with the new media that has SP1?

Thanks
Jeff

"Charlie Russel - MVP" <charlie@xxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:eiusSddzGHA.2636@xxxxxxxxxxxxxxxxxxxxxxx
Well, I assume you would have to have the drivers on floppy, yes. Only
the RAID drivers are an issue - all others you can load once the core OS
is loaded - there's a natural stopping point when Windows is loaded, but
none of the SBS components have been loaded yet. You can pause there and
load the drivers you'll need later, such as network drivers if your NIC
needs a driver, for example. Then you restart the install and finish.

--
Charlie.
http://msmvps.com/xperts64

"Jeff Teel" <jdteel@xxxxxxxxxxxx> wrote in message
news:%23K8L3wczGHA.3752@xxxxxxxxxxxxxxxxxxxxxxx
Thanks for replying Charlie
I thought that might be the case but wasn't sure. This brings up
another question though. With the upgrade of my OS to SP1 (I have
squeezed some SP1 a set of full install media out of Dell) if I use the
SP1 media to do a re-install will those drivers be on the disks or is
the media missing the drivers for RAID ect....? On the new media SBS
SP1 disks that they shipped there is no mention of Dell. They are from
Microsoft Licensing. Am I assuming correctly that if I have to do a
complete re-install and use the SP1 media I will have to get the
drivers loaded from a drive other than the CD?

Thanks
Jeff

"Charlie Russel - MVP" <charlie@xxxxxxxxxxxxxxxxxxxxxxx> wrote in
message news:%23mCqIoYzGHA.4896@xxxxxxxxxxxxxxxxxxxxxxx
If you flattened the machine, there's no drivers on it. You boot from
the CD, and add the drivers. On Dell servers, if SBS is a supported OS,
they are supposed to streamline the drivers onto the SBS CD so that you
don't need a floppy.

An external USB floppy is normally fine, by the way. I keep one here,
sitting in the server room, in a ziplock bag on the back shelf. Just in
case.

--
Charlie.
http://msmvps.com/xperts64

"Jeff Teel" <jdteel@RMoveThis sugardog.com> wrote in message
news:OPvCS5VzGHA.3568@xxxxxxxxxxxxxxxxxxxxxxx
Hi Charlie

I have a question that relates to loading RAID drivers that I have
been wondering about. Several months ago I flattened my server and
started over with a clean install. I'll try not to leave out any
thing but it's been a while since I've done this!! Before I did the
new install though I made the C:\ partition larger using the install
CD. Would the drivers for RAID still be on the system from the
original install or are they taken off when the partition was
increased? I ask because I don't have a floppy drive and there would
be no other way (except an external floppy) but to use the CD drive
to get that done if I could not use it. It is a Dell Server that had
SBS preinstalled. I can't remember for sure if I had to do any
driver installs before I put the OS on.

Thanks
Jeff

"Charlie Russel - MVP" <charlie@xxxxxxxxxxxxxxxxxxxxxxx> wrote in
message news:uSFNtPVzGHA.1292@xxxxxxxxxxxxxxxxxxxxxxx
RAID controllers require that drivers be loaded during the initial
installation process. You need the drivers on a floppy (USB key
and/or CD will NOT do!) When the blue installation screen first
comes up, you'll see "Press F6 to load storage drivers" at the
bottom of the screen. Press F6 and then follow the prompts to load
your RAID/SATA drivers.

--
Charlie.
http://msmvps.com/xperts64


tqc4869 wrote:
Okay, I've been able to get the raid to show up on disk management
after
booting up with the old drive.. Should I keep the old drive and
somehow
move the data to the raid partition?


.

Relevant Pages

  • Re: Cannot upgrade my Acer laptop to SP1
    ... MS is supposed to be helping with SP1 probs, ... When I tried to install SP1, ... I did look for drivers. ... If I don't get help from Microsoft or Acer, ...
    (microsoft.public.windows.vista.general)
  • Re: Stuttering problem watching live TV
    ... Media Player has always handled problems with out of sequence or a backlog ... droppigng a group of frames at a time which is observed as stutter in MCE. ... I should mention that I never did get the new AMD X2 drivers to report the ... downloaded from amd's site version 1.2.2.2 and tried to install it. ...
    (microsoft.public.windows.mediacenter)
  • Re: old xp home computers
    ... > clean install ....i hope. ... utilities on the Internet for the type of BIOS you have. ... You also have hardware on your machine that requires drivers to interface ...
    (microsoft.public.windowsxp.security_admin)
  • Re: Format Fdsik XP
    ... you can install it first thing. ... patch/install the drivers you prepared with earlier. ... network drivers and finally your video card drivers. ... of the hardware drivers from here - always go to the actual manufacturers ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Decoder in Use error while attempting to access live tv.
    ... Additionally, when you installed the drivers, any chance the it runs a whole setup program that may also installs some card-specific TV application? ... If there was an option to just install the drivers, ... wrong with your decoder since the same decoder as LiveTV. ... restart Media ...
    (microsoft.public.windows.mediacenter)
Loading