Re: sbs 2k3 sp1

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

If you can't get the Exchange thing fixed with the available documentation,
I'd consider calling Microsoft support and let them diagnose it and give you
the solution. There's a cost associated with calling them, but IMO it's
worth it rather than spending a lot of time trying to diagnose something
that doesn't seem to fit in with the documented solutions.


"guyg" <guyg@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:7B79E4F2-07D5-493E-87B0-1A4C58EF5E51@xxxxxxxxxxxxxxxx
I use a third party backup that backs up data and exchange only.
Novastor backup. After a get the server errors fixed I will backup the
entire server.
And make a system state disk. I tried the fix for the system attendant but
it still dose not work. I still get the same error.I will try to fix the
Userenv next.
Thanks,
Guy

"Dave Nickason [SBS MVP]" wrote:

You certainly should not have to rebuild the server. In fact, please
resist
the temptation to do anything drastic like reinstalling anything,
especially
in light of the fact that the server seems to be performing
satisfactorily.
My recommendation would be to treat these as four separate issues, and
solve
one before moving on to the next. That way, you'll avoid doing several
unrelated actions, getting an unintended result, and wondering which of
those actions was the cause.

It sounds like you need to get backup configured and running first. Can
you
just re-run the backup wizard to configure a regular full daily backup?
That should stop the backup error. For the backup issue, see also
http://eventid.net/display.asp?eventid=5634&eventno=4340&source=SmallBusinessServer&phase=1.

From there, please see this KB for what will hopefully solve your SA
errors:

The System Attendant generates Event ID 9098 and 9099 messages every five
minutes
http://support.microsoft.com/?kbID=326011

For the USERENV error, see
http://eventid.net/display.asp?eventid=1095&eventno=4567&source=Userenv&phase=1.

For the allocated memory alert, you are safe to ignore it for now. After
your other issues are solved, I'd look at
http://blogs.technet.com/sbs/archive/2006/06/07/433707.aspx. Ignore that
it
applies to when you add RAM. It'll tell you how to configure the alert
correctly. If you still get the alert after configuring it according to
these instructions, please post back.

By the way, that's the official SBS support blog from the engineers at
Microsoft. You might want to bookmark it for future reference. Other
excellent information sources I used here are http://eventid.net/ (I
recommend paying for the membership but you can certainly use it for
free),
and http://support.microsoft.com/.


"guyg" <guyg@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:B30E2601-9E4A-46FB-8501-287C113D1944@xxxxxxxxxxxxxxxx
I have a sbs2k3 sp1 box that I am having problems with.
During a storm in the begining of July06 the server restarted 3 times
in
avery short
time span. The day after this I started to get server reports with many
errors in it.
I get 2 critical alerts every day, Windows small business server backup
failed (event ID 5634), Allocated memory alert. I also get 2
application
log
errors every day,
Userenv (event ID 1095) and MSExchangeSA (event ID 9099) every five
minutes.
The server seems to work fine. I do not have the windows backup
configured,
and yet I am getting an error on it. If I go into the services snap-in
and
look at dependencey's of some
services I see none. Compaired to good working server there should be
some.
I think but am not sure that the WMI service is corrupted or failing.
Is there a way to resolve this with out rebuilding the server.I do not
have
a good backup of system state.
Thanks,
Guy





.

Relevant Pages

  • Re: ntbackup & System Files
    ... The Automated System Recovery Preparation Wizard backs up the System State ... In Backup, a collection of system-specific data maintained by the operating ... database (if the server is a certificate server). ... ASR disk. ...
    (microsoft.public.windows.server.general)
  • Re: SBS two adapter setup with Netopia Router. Help Save my weeked
    ... >> When you click OK on this message, the server restarts. ... >> are not able to start the server or restore the system state from backup. ...
    (microsoft.public.windows.server.sbs)
  • Re: bare-metal restoration -- what should I know before I do it?
    ... and preferably SBS backup (so you can follow the documented ... you need to swing this server. ... restore the OS from backup, ... I get to the point in DSRM where I've restored the System State ...
    (microsoft.public.windows.server.sbs)
  • Re: Backup Cluster
    ... Windows Server 2008 Readiness Team ... In the procedure says that must be done by ASR backup, ... In the procedure says that should be performed backup system state / system ...
    (microsoft.public.windows.server.clustering)
  • RE: SBS Back up Failure
    ... attached the log and report from yesterday's backup also. ... One or more components of Small Business Server Backup failed. ... recommended that you review errors in the Event log related to the service. ... Notifications task in the Server Management Monitoring and Reporting taskpad. ...
    (microsoft.public.windows.server.sbs)