Re: Installing SBS with Raid 5

You are correct. In looking for anything that could be wrong, I
overlooked that. The Adaptec is for my SCSI Tape Drive.


Merv Porter [SBS-MVP] wrote:
On the Dell PEs I've ordered (no raid), the Adaptec 39160 is an add-in
controller that occupies a PCI slot. The Perc 4E/DI RAID is supposed to be
an embedded controller on the motherboard.

Do you physically have an Adaptec 39160 in your PE 2850 (and is it there to
support a SCSI tape drive)? If so, maybe remove it and see if the install
finds the Perc Raid controller with F6 and a floppy with the PERC 4E/DI
drivers..

--
Merv Porter [SBS-MWP]
============================


"K.J. 44" <Holleran.Kevin@xxxxxxxxx> wrote in message
news:1156638228.324878.256570@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
I am getting very frustrated. It still says that setup cannot find any
hard disk drives. I have the latest PERC4e/Di driver.

What else could it be? I suppose I could try and find the SCSI
controller driver too. All my server says about SCSI is that it is an
Adaptec 39160 but I cannot find a driver for it on Adaptec's website.
Could the SCSI driver be the problem for not finding the HD's?
However, when I enter the RAID config it finds the drives fine.

And what does
1 Logical Disk(s) found on the host adapter
0 Physical Disk(s) found on the host adapter
1 Logical Disk(s) handled by BIOS
0 Physical Disk(s) handled by BIOS

mean?

Thank you very much. I am putting my weekend in here at work and I
need to get this stuff rolling!

Thanks!

K.J. 44 wrote:
Okay, I must have the incorrect driver then. The Dell CD that doesn't
work because I have a PowerEdge 2850 and am installing Microsoft SBS
has many different drivers on it. How can I tell which to use? How
can I tell the exact RAID controller I have? I have a PERC4e/Di
controller but there are so many different drivers on the CD I don't
know exactly what to copy onto my floppy.

Thanks.



Charlie Russel - MVP wrote:
Chris is correct, you need to press F6 and add the correct RAID
drivers for
your RAID array controller. Windows will not see the drives without the
right driver. Also, if you choose the wrong driver, it will happily
accept
that, but then fail to see the array since it still doesn't have the
driver
loaded.

--
Charlie.
http://msmvps.com/xperts64


K.J. 44 wrote:
I did this and I still get the "did not find any hard drives on your
computer" error.

Any other suggestions?

When I Ctrl-M into the RAID array, it sees the three drives and
builds
the array just fine. Why can't Windows see the drives?

Thanks in advance.


Cris Hanna [SBS-MVP] wrote:
During the initial "blue screen" or "text based" install you should
see
at the bottom of the screen a message to press F6 to install
additional
drivers. This is when you need to insert the floppy disk with the
PERC
driver

--
Cris Hanna [SBS-MVP]
-----------------------------
Please do not contact me directly, only reply within the Newsgroup
Thanks
--------------------------------
Using Windows Mail on Vista Ultimate
"K.J. 44" <Holleran.Kevin@xxxxxxxxx> wrote in message
news:1156631817.638018.41360@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hello,

I am having trouble getting my server off the ground. I am
running
three 300 GB drives in RAID 5. I am using a PERC4e/Di controller.
I
run the configuration utility and everything seems fine in there
but
then it says:

1 Logical Disk(s) found on the host adapter
0 Physical Disk(s) found on the host adapter
1 Logical Disk(s) handled by BIOS
0 Physical Disk(s) handled by BIOS

When I try to install SBS, it says:

"Setup did not find any hard drisk drives installed in your
computer."

I have not had experience setting up a RAID5 configuration. Any
suggestions would be greatly appreciated.

And I have a PowerEdge 2850 and the tool sent with the Dell
doesn't
support SBS (naturally).

Thanks.

------=_NextPart_000_01B4_01C6C93A.43998AE0
Content-Type: text/html; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable
X-Google-AttachSize: 2152

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html;
charset=iso-8859-1">
<META content="MSHTML 6.00.5536.16385" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>During the initial "blue screen" or
"text
based"
install you should see at the bottom of the screen a message to
press F6
to
install additional drivers.</FONT></DIV>
<DIV><FONT face=Arial size=2>This is when you need to insert the
floppy
disk
with the PERC driver</FONT></DIV>
<DIV><BR>-- <BR>Cris Hanna
[SBS-MVP]<BR>-----------------------------<BR>Please
do not contact me directly, only reply within the
Newsgroup<BR>Thanks<BR>--------------------------------<BR>Using
Windows
Mail on
Vista Ultimate</DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px;
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"> <DIV>"K.J. 44"
&lt;<A













href="mailto:Holleran.Kevin@xxxxxxxxx";>Holleran.Kevin@xxxxxxxxx</A>&gt;
wrote in message <A
href="news:1156631817.638018.41360@xxxxxxxxxxxxxxxxxxxxxxxxxxxx";>news:1156631817.638018.41360@xxxxxxxxxxxxxxxxxxxxxxxxxxxx</A>...</DIV>Hello,<BR><BR>I
am having trouble getting my server off the ground.&nbsp; I am
running<BR>three 300 GB drives in RAID 5.&nbsp; I am using a
PERC4e/Di
controller.&nbsp; I<BR>run the configuration utility and everything
seems fine in there but<BR>then it says:<BR><BR>1 Logical Disk(s)
found
on the host adapter<BR>0 Physical Disk(s) found on the host
adapter<BR>1
Logical Disk(s)&nbsp; handled by BIOS<BR>0 Physical Disk(s) handled
by
BIOS<BR><BR>When I try to install SBS, it says:<BR><BR>"Setup did
not
find any hard drisk drives installed in your computer."<BR><BR>I
have
not had experience setting up a RAID5 configuration.&nbsp;
Any<BR>suggestions would be greatly appreciated.<BR><BR>And I have a
PowerEdge 2850 and the tool sent with the Dell doesn't<BR>support
SBS
(naturally).<BR><BR>Thanks.<BR></BLOCKQUOTE></BODY></HTML>

------=_NextPart_000_01B4_01C6C93A.43998AE0--


.

Relevant Pages

  • Re: Installing SBS with Raid 5
    ... The Perc 4E/DI RAID is supposed to be ... an embedded controller on the motherboard. ... I have the latest PERC4e/Di driver. ... Physical Diskfound on the host adapter ...
    (microsoft.public.windows.server.sbs)
  • RE: USB Mass Storage Device - This device cannot start. (Code 10)
    ... > Master IDE Controller ... > Dual USB Mouse & iTouch Keys ... > Floppy disk drives: ... > Creative Hardware Abstract Layer Driver ...
    (microsoft.public.windowsxp.hardware)
  • Re: [PATCH] Resurrect IT8172 IDE controller driver
    ... be dropped though as the controller has only a single channel... ... Perhaps by clearing it once could achieve PIO0 timings, just like by clearing the fast timing bits on PIIX? ... But you can still find in this driver a good example of how things should be done... ... such drives should have been blacklisted... ...
    (Linux-Kernel)
  • Re: Installing SBS with Raid 5
    ... an embedded controller on the motherboard. ... I have the latest PERC4e/Di driver. ... when I enter the RAID config it finds the drives fine. ... Physical Diskfound on the host adapter ...
    (microsoft.public.windows.server.sbs)
  • Sound Device = modem???
    ... Drives Memory Modules c,d ... local user accounts last logon ... Intel82801DB Ultra ATA Controller ... Controller [Display adapter] ...
    (microsoft.public.windowsmedia)