Re: Cannot telnet to port 25 from Windows 2003 SBS server to itself
- From: "Blackgoo" <blackgoo@xxxxxxxxx>
- Date: 10 Aug 2006 16:54:49 -0700
Hi,
No, you are not off base. Thanks for checking.
I'm sure I'm running the telnet command correctly and have tried the
methods you suggested below.
Since the server is in production I cannot easily remove the av
software or veritas from it. I can tell you that we have McAfee SBS
server with Groupshield on the server.
As for the wizard, what is it about the wizard that will possibly
resolve it? Honestly, I'm not all that familiar with it and am
curious.
SMTP services are running.
Thanks.
Scott Howard
chace zhang wrote:
Hi,
Thank you for posting here.
From your post, you cannot use telnet to connect the Exchange server on
port 25. If I'm off base, please feel free to let me know.
First, please refer to the following article to make sure you run the
Telnet command correctly.
XFOR: Telnet to Port 25 of IMC to Test IMC Communication:
http://support.microsoft.com/?id=153119
Secondly, I would suggest the following troubleshooting steps to narrow
down this problem.
1. On the Exchange server, please run Telnet to connect to the Exchange
server NetBIOS name, FQDN name and IP address. Is it successful?
2. Please use NSlookup to verify if the Exchange server FQDN name can be
resolved in the internal network.
3. Please temporary remove Anti-virus software and Veritas on SBS Server.
4. Make sure SMTP services is started.
Also please refer to following website to re-run CEICW wizard.
A step by step explanation of the CEICW:
http://www.sbs-rocks.com/sbs2k3/sbs2k3-n2.htm
NOTE: This response contains a reference to a third party World Wide Web
site. Microsoft is providing this information as a convenience to you.
Microsoft does not control these sites and has not tested any software or
information found on these sites; therefore, Microsoft cannot make any
representations regarding the quality, safety, or suitability of any
software or information found there. There are inherent dangers in the use
of any software found on the Internet, and Microsoft cautions you to make
sure that you completely understand the risk before retrieving any software
from the Internet.
Hope this helps. Please let me know if you have any other concerns, or need
anything else.
Best Regards,
Chace Zhang (MSFT)
Microsoft CSS Online Newsgroup Support
Get Secure! - www.microsoft.com/security
=====================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.
Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.
For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.
Any input or comments in this thread are highly appreciated.
=====================================================
This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
| From: "Blackgoo" <blackgoo@xxxxxxxxx>
| Newsgroups: microsoft.public.windows.server.sbs
| Subject: Re: Cannot telnet to port 25 from Windows 2003 SBS server to
itself
| Date: 4 Aug 2006 14:32:32 -0700
| Organization: http://groups.google.com
| Lines: 79
| Message-ID: <1154727152.128211.235460@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>
| References: <1154544401.563304.253740@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
| <ObOu5emtGHA.2088@xxxxxxxxxxxxxxxxxxxx>
| NNTP-Posting-Host: 216.231.34.213
| Mime-Version: 1.0
| Content-Type: text/plain; charset="iso-8859-1"
| X-Trace: posting.google.com 1154727157 7819 127.0.0.1 (4 Aug 2006
21:32:37 GMT)
| X-Complaints-To: groups-abuse@xxxxxxxxxx
| NNTP-Posting-Date: Fri, 4 Aug 2006 21:32:37 +0000 (UTC)
| In-Reply-To: <ObOu5emtGHA.2088@xxxxxxxxxxxxxxxxxxxx>
| User-Agent: G2/0.2
| X-HTTP-UserAgent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET
CLR 1.1.4322; InfoPath.1; .NET CLR 2.0.50727),gzip(gfe),gzip(gfe)
| Complaints-To: groups-abuse@xxxxxxxxxx
| Injection-Info: m79g2000cwm.googlegroups.com; posting-host=216.231.34.213;
| posting-account=lEvXMA0AAABb-PZQHlaq-U-HjmNgEXF2
| Path:
TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTFEEDS02.phx.gbl!newsfeed00
.sul.t-online.de!t-online.de!border2.nntp.dca.giganews.com!border1.nntp.dca.
giganews.com!nntp.giganews.com!postnews.google.com!m79g2000cwm.googlegroups.
com!not-for-mail
| Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.server.sbs:287136
| X-Tomcat-NG: microsoft.public.windows.server.sbs
|
| The application is veritas 10.x. However, the fact that the
| applicaiton isn't sending e-mail seems to be more of a symptom of the
| problem; which is I cannot connect from the server on port 25 and send
| e-mail. Thanks for your help nonetheless.
|
| Cris Hanna (SBS-MVP) wrote:
| > what are the applications and we might have better information for you
| >
| > --
| > Cris Hanna [SBS-MVP]
| > --------------------------------------
| > Please do not respond directly to me, but only post in the newsgroup so
all can take advantage
| > <blackgoo@xxxxxxxxx> wrote in message
news:1154544401.563304.253740@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
| > Hello,
| >
| > I am having this problem on two sbs installations I've done recently.
| > I need to set up an application to send logs to me and I cannot get
| > those applications to send e-mail, although exchange mailboxes and
| > other mail flow works fine. Specifically, from a command prompt at
the
| > server I have tried to telnet to port 25 and I get the following
| > message:
| >
| > c:\telnet localhost 25
| > Connecting To localhost...Could not open connection to the host, on
| > port 25: Connect failed
| >
| > My guess is that it is something about SBS that needs to be switched
| > off or changed. I have read some threads and it appears that others
| > are having this problem. Some threads have mentioned IAS packeting
| > filtering but I haven't found a silver bullet yet so I thought I would
| > post this.
| >
| > Someone will probably have some clarifying questions. Please let me
| > know and I'll fill in the details.
| >
| > Thanks for you all your help.
| >
| > Scott
| >
| > ------=_NextPart_000_0536_01C6B63D.CFFD44A0
| > Content-Type: text/html; charset=iso-8859-1
| > Content-Transfer-Encoding: quoted-printable
| > X-Google-AttachSize: 2083
| >
| > <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
| > <HTML><HEAD>
| > <META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
| > <META content="MSHTML 6.00.2900.2912" name=GENERATOR>
| > <STYLE></STYLE>
| > </HEAD>
| > <BODY bgColor=#ffffff>
| > <DIV><FONT face=Arial size=2>what are the applications and we might
have better
| > information for you</FONT></DIV>
| > <DIV><BR>-- <BR>Cris Hanna
| > [SBS-MVP]<BR>--------------------------------------<BR>Please do not
respond
| > directly to me, but only post in the newsgroup so all can take
advantage</DIV>
| > <BLOCKQUOTE
| > style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px;
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
| > <DIV><<A
href="mailto:blackgoo@xxxxxxxxx";>blackgoo@xxxxxxxxx</A>> wrote
| > in message <A
| >
href="news:1154544401.563304.253740@xxxxxxxxxxxxxxxxxxxxxxxxxxx";>news:115454
4401.563304.253740@xxxxxxxxxxxxxxxxxxxxxxxxxxx</A>...</DIV>Hello,<BR><BR>I
| > am having this problem on two sbs installations I've done
recently.<BR>I need
| > to set up an application to send logs to me and I cannot get<BR>those
| > applications to send e-mail, although exchange mailboxes and<BR>other
| > flow works fine. Specifically, from a command prompt at
the<BR>server I
| > have tried to telnet to port 25 and I get the
| > following<BR>message:<BR><BR>c:\telnet localhost 25<BR>Connecting To
| > localhost...Could not open connection to the host, on<BR>port 25:
Connect
| > failed<BR><BR>My guess is that it is something about SBS that needs
to be
| > switched<BR>off or changed. I have read some threads and it
appears that
| > others<BR>are having this problem. Some threads have mentioned
IAS
| > packeting<BR>filtering but I haven't found a silver bullet yet so I
thought I
| > would<BR>post this.<BR><BR>Someone will probably have some clarifying
| > questions. Please let me<BR>know and I'll fill in the
| > details.<BR><BR>Thanks for you all your
| > help.<BR><BR>Scott<BR></BLOCKQUOTE></BODY></HTML>
| >
| > ------=_NextPart_000_0536_01C6B63D.CFFD44A0--
|
|
.
- Follow-Ups:
- Re: Cannot telnet to port 25 from Windows 2003 SBS server to itself
- From: chace zhang
- Re: Cannot telnet to port 25 from Windows 2003 SBS server to itself
- References:
- Cannot telnet to port 25 from Windows 2003 SBS server to itself
- From: blackgoo
- Re: Cannot telnet to port 25 from Windows 2003 SBS server to itself
- From: Blackgoo
- Re: Cannot telnet to port 25 from Windows 2003 SBS server to itself
- From: chace zhang
- Cannot telnet to port 25 from Windows 2003 SBS server to itself
- Prev by Date: Re: RDP to SBS 2003 Server
- Next by Date: Re: SBS 2003 Standard IIS Issue
- Previous by thread: Re: Cannot telnet to port 25 from Windows 2003 SBS server to itself
- Next by thread: Re: Cannot telnet to port 25 from Windows 2003 SBS server to itself
- Index(es):
Relevant Pages
|
