RE: CMAK reset clear service profile

Tech-Archive recommends: Fix windows errors by optimizing your registry

Hi Emmanuel,

Thank you for posting in SBS newsgroup.

From your description, I understand the issue to be: Remote client can not
create PPTP/VPN connection to the SBS with Error 733. If I have
misunderstood your concerns, please do not hesitate to let me know.

Please follow the steps below to reconfigure VPN access on an SBS
environment:

1. Run CEICW, follow the wizard and select Enable firewall and then make
sure Virtual Private Networking (VPN) is selected in the Services
Configuration page. And make sure you have typed the public FQDN of the SBS
server on the Web Server Certificate page.
2. Run Remote Access Wizard in Server Management\Internet and
E-mail\Configure Remote Access, and select VPN access in the Remote Access
Method page. After finishing this wizard, RRAS is configured to allow
inbound VPN access, and it can assign IP addresses to the VPN clients by
using DHCP.

Note: When we run the remote access wizard to set up the VPN service, we
need to input the public IP address or the public FQDN of the SBS server.
We need to make sure that the address can be accessed from the internet.

3. On the VPN client, go to https://publicFQDN/remote, clear I'm using a
public or shared computer, log in and download Connection Manager.
4. Install Connection Manager on the VPN client.
5. Is there a hardware router installed in front of the SBS server? If so,
ensure that the port forwarding for TCP 1723 and GRE port (protocol number
47) are opened. PPTP VPN is negotiating a connection on TCP port 1723 and
send data to and from the PPTP server using the GRE protocol (IP Protocol
47, 0x2F if you are looking in Network Monitor). You should open port 1723
on the router and also make sure IP Protocol 47 is allowed.

If the issue still occurs, would you please help me collect the following
information?

1. Is everything OK if you manually create a VPN connection to the SBS
server? To do so, see:

305550How to configure a VPN connection to your corporate network in
Windows XP Professional
http://support.microsoft.com/default.aspx?scid=kb;EN-US;305550

314076 How to configure a connection to a virtual private network (VPN) in
http://support.microsoft.com/?id=314076

2. Get the IPCONFIG /ALL results when Creating VPN on remote client and SBS.

I appreciate your time and look forward to hearing from you.

Best regards,

Crina Li (MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

=====================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.

=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
| Thread-Topic: CMAK reset clear service profile
| thread-index: Acamht+C5cZWucKGS6eqi/8lqsviWw==
| X-WBNR-Posting-Host: 84.193.144.152
| From: =?Utf-8?B?RW1tYW51ZWxEZVNtZXQ=?=
<EmmanuelDeSmet@xxxxxxxxxxxxxxxxxxxxxxxxx>
| Subject: CMAK reset clear service profile
| Date: Thu, 13 Jul 2006 07:16:03 -0700
| Lines: 11
| Message-ID: <0844868E-4468-4067-BE47-BA49F2BA3E53@xxxxxxxxxxxxx>
| MIME-Version: 1.0
| Content-Type: text/plain;
| charset="Utf-8"
| Content-Transfer-Encoding: 7bit
| X-Newsreader: Microsoft CDO for Windows 2000
| Content-Class: urn:content-classes:message
| Importance: normal
| Priority: normal
| X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.1830
| Newsgroups: microsoft.public.windows.server.sbs
| Path: TK2MSFTNGXA01.phx.gbl
| Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.server.sbs:281129
| NNTP-Posting-Host: TK2MSFTNGXA01.phx.gbl 10.40.2.250
| X-Tomcat-NG: microsoft.public.windows.server.sbs
|
| Hi,
|
| After creating a service profile with CMAK in SBS 2003, my previous
| succesfull VPN connections no longer work.
| Get error 733 when registering computer on the network.
| How can I reset the CMAK to previous situation or clear the profile I've
| created.
|
| Thanks,
|
| Emmanuel
|

.

Relevant Pages