Re: Firewall, FTP

The XP/Windows firewall is controlled by Group Policy on your SBS Server > Group Policy Management Console

--
Cris Hanna [SBS-MVP]
--------------------------------------
Please do not respond directly to me, but only post in the newsgroup so all can take advantage
"FREEMAN" <FREEMAN@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:E5136E11-0C0A-463C-A32E-28EC360F660B@xxxxxxxxxxxxxxxx
I recently enabled the firewall on my first SBS install. Since I did, when I
try to FTP (using frontpage among others) I gett an error the effect of:

500 Illegal PORT command
5000 LPRT not understood

I went into windows firewall, and the area where it allows you to disable is
now grayed out. I don't believe it was before I configured the firewall on
the SBS. I have tried turning off the firewall on SBS, but it hasn't helped.

Relevant Pages

  • Re: ISA 2004 and SBS websites
    ... And that one if left enabled will keep the firewall service ... Call to Reading hardware selection returned ok. ... Call to Reading web publishing selection returned ok. ... Call to Notifying client setup for Default gateway as the SBS server ...
    (microsoft.public.windows.server.sbs)
  • Re: ceicw failure on e-mail config
    ... Merv Porter [SBS MVP] ... Ethernet adapter Server Local Area Connection: ... Call to Reading the firewall selection returned ok. ... Firewall Rule: SBS DHCP Client ...
    (microsoft.public.windows.server.sbs)
  • Re: SBS VPN setup?
    ... And if you have a hardware firewall you haven't flashed in years they just got in through a exploit. ... SBS plugs into a switch with the other computers and the switch is plugged into a firewall appliance with 2-nics. ... To compare apples to apples, let us assume there is a network setup as I outlined above...and the firewall appliance is an ISA server, such as those available from Celestix. ... > learn and test the RWW solution before deploying it. ...
    (microsoft.public.windows.server.sbs)
  • RE: CEICW fails on firewall configuration every time. Please help.
    ... Thank you for posting to the SBS Newsgroup. ... Reboot the server. ... CEICW fails on firewall configuration every time. ... >Firewall Rule: SBS DHCP Client ...
    (microsoft.public.windows.server.sbs)
  • Re: Firewall on a single NIC SBS2003 Standard edition
    ... Frank McCallister SBS MVP ... > " Well, if you're wanting to run the firewall on a single NIC, you aren't ... Don't ask the server to do *everything*, ... > internet traffic from the workstations don't have to go through the SBS. ...
    (microsoft.public.windows.server.sbs)