Re: Problem with CEICWizard

Hollis
Can you not go to Device Manager on your SBS and trouble shoot the driver so that it shows up?

You don't have TCP/IP V6 installed on the server do you?

--
Cris Hanna [SBS-MVP]
--------------------------------------
Please do not respond directly to me, but only post in the newsgroup so all can take advantage
"Hollis Paul [MVP - Outlook]" <nospam@xxxxxxxxxx> wrote in message news:VA.000000f5.00228603@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
When I first installed SBS2003, I used the onboard NIC for one of the
connections. Naturally, the install did not see it, so I ran the CEICW
as a 1 NIC installation. I have since put a second NIC into the
Motherboard. That didn't show up in the drop down list box where I am
supposed to choose the WAN connection, so I tried another one. That
didn't show up either. What can I do to wipe out everything the CEICW
did that first time and start over?

--
Hollis Paul
Mukilteo, WA USA

Relevant Pages

  • Re: Rebuild Microsoft Windows XP SP2 - Hardened, comments needed
    ... chipset & other drivers ... Disconnect network cable ... Disable netbios over tcp/ip {no side effect unless u using ... Install graphics driver ...
    (microsoft.public.windowsxp.setup_deployment)
  • Re: ISA 2000 Client removal and ISA 2004 Client issues
    ... Removing the winsock keys must have done the trick. ... It seems that the TCP/IP stack on the XP ... Step 2: Install TCP/IP ... As for the Windows Firewall, in SBS circumstance, the turn on and turn off ...
    (microsoft.public.windows.server.sbs)
  • Re: SBS 2003 OWA Access is requiring Domain Admin rights...
    ... Can I run the CEICW remotely? ... Merv Porter [SBS MVP] ... I just attempted to install 831464 and I received the following ...
    (microsoft.public.windows.server.sbs)
  • Re: 8570vampire drinks your blood.......
    ... For TCP/IP, I used to use Cisco's suite which was on a Cisco ... Windows 3.x running on a workstation with a 386 or higher processor. ... Cisco TCP/IP Suite 100 is a set of TCP/IP utilities and a TCP/IP stack. ... When you install the suite, you can select the utilities you need, although ...
    (comp.sys.ibm.ps2.hardware)
  • Re: SCO Unix 3.2.4.2 networking/licensing
    ... The system doesn't have networking installed and I'm worried that they ... Does anyone remember if 3.2.4.2 included TCP/IP networking in the base ... Products at that time included SCO Unix 3.2v4.2 and SCO ... have a TCP-less install, they bought the plain Unix package and did not ...
    (comp.unix.sco.misc)
Loading