RE: Configure Remote Access Post SBS 2K3 SP1
- From: Captain Jack <CaptainJack@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Wed, 31 May 2006 05:43:02 -0700
I was very anal about these Service Packs and downloaded each piece like it
was nitro, then followed the Microsoft handling instructions like my life
depended on it.
I did install all of the pieces - step by step according to the instructions
for Microsoft SBS 2003 Standard. This makes all the more frustrating.
Additionally, since applying the service packs - monitoring has stopped
collecting data.
Again, this was a completely new install using the customers media, then
downloading all of the service packs and installing them.
""Crina Li"" wrote:
Hi Jack,.
Thank you for posting in SBS newsgroup.
From the description, I understand the issue to be: you get error 80070001
in RRAS log. If I have misunderstood your concerns, please do not hesitate
to let me know.
As I know, before installing the SBS 2003 SP1 onto the server, we need to
make sure that the required components such as Windows server 2003 SP1,
Exchange 2003 SP1, WSS SP1 have been installed. Please refer to the release
note and double check the install procedure:
http://www.microsoft.com/downloads/details.aspx?FamilyId=022677CC-F5AC-4BFB-
9AD0-454E89CB98BB&displaylang=en
Would you please help me confirm if you have strictly followed the document
to install SBS SP1?
For SBS 2003 Standard:
http://download.microsoft.com/download/2/e/9/2e902d14-da2e-43ba-8bd6-6d258f5
356b6/SP1Setup_std.htm
If you only install Windows Server 2003 SP1, the issue may occur. Please
try to remove Windows Server 2003 SP1 to see how thing goes.
Also you can check if you have opened the following ports on your router:
TCP 25 This port is used for incoming SMTP traffic. If you are using POP3
connector, there is no need to open this port.
TCP 110 This port is used for POP3 mail clients.
TCP 443 SSL
TCP 444 Companyweb SSL
TCP 4125 Remote Web Workplace
TCP 3389 Terminal services
TCP 1723 PPTP VPN connection
GRE port (protocol number 47) This port is used for incoming PPTP VPN
connection.
Thanks for your time and I look forward to hearing from you.
Best regards,
Crina Li (MSFT)
Microsoft CSS Online Newsgroup Support
Get Secure! - www.microsoft.com/security
=====================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.
Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.
For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.
Any input or comments in this thread are highly appreciated.
=====================================================
This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
| Thread-Topic: Configure Remote Access Post SBS 2K3 SP1
| thread-index: AcaDwUo6g5B4PT67SI6BAP44MaCneQ==
| X-WBNR-Posting-Host: 216.201.216.54
| From: =?Utf-8?B?Q2FwdGFpbiBKYWNr?= <Captain
Jack@xxxxxxxxxxxxxxxxxxxxxxxxx>
| Subject: Configure Remote Access Post SBS 2K3 SP1
| Date: Tue, 30 May 2006 01:16:02 -0700
| Lines: 94
| Message-ID: <9E8CE84B-A8B5-4025-8331-38E1AE10A818@xxxxxxxxxxxxx>
| MIME-Version: 1.0
| Content-Type: text/plain;
| charset="Utf-8"
| Content-Transfer-Encoding: 7bit
| X-Newsreader: Microsoft CDO for Windows 2000
| Content-Class: urn:content-classes:message
| Importance: normal
| Priority: normal
| X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.1830
| Newsgroups: microsoft.public.windows.server.sbs
| Path: TK2MSFTNGXA01.phx.gbl
| Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.server.sbs:271684
| NNTP-Posting-Host: TK2MSFTNGXA01.phx.gbl 10.40.2.250
| X-Tomcat-NG: microsoft.public.windows.server.sbs
|
| Virgin (New) install of SBS 2K3 (reinstall after original server passed
on
| to the silicon graveyard). The client's media pack is good ole' SBS2003
| Standard - No Service Packs. Installed cleanly from media pack.
| Downloaded all of the pieces parts of the SBS 2K3 and installed step by
step
| - inch by inch according the Microsoft website. Did not even install
AV
| software till I had gotten all of the Microsoft By God Service Packs
| Installed.
|
| Restored customer data, all is well. Even applied Exchange SP2. All
| internal functions work well. (Remain calm - all is well). Customer
wants
| to start using RWW... (Single NIC, SonicWall TZ 170). Opened all the
| ports, re-ran the Connect to Internet Wiz - No problems. Attempted to
run
| Configure Remote Access.... Looks good.... At the very end, points to
a
| problem and refers to rraslog.txt... I've reinstalled all of the
pieces
| parts of SBS 2K3 SP1 and I've read as many of the posts in the free world
as
| I can find. VPN Connector works... OWA works... RWW works after I
| establish VPN Connector...
|
| 5/30/2006 2:14 AM
| C:\Program Files\Microsoft Windows Small Business
| Server\Networking\RRASWiz\wizrras.dll, version 5.2.2893.0
| Calling CRRASCommit::CommitEx
| Calling CRRASCommit::ValidatePropertyBag
| pdispPPPBag->QueryInterface returned OK
| PropertyBag 257328
| Reading property value for enabling Remote Access returned OK
| bRemoteAccess = 1
| Reading property value for VPN returned OK
| bVPN = 1
| Reading property value for RAS returned OK
| bRAS = 0
| Calling CRRASCommit::ValidateVPNProperties
| Reading VPN Server Name returned OK
| VPN Server Name is server01.robertboydarchitects.local
| Calling CRRASCommit::ValidateDHCPProperties
| DHCP server is installed on the box
| CRRASCommit::ValidateDHCPProperties returned OK
| CRRASCommit::ValidateVPNProperties returned OK
| CRRASCommit::ValidatePropertyBag returned OK
| pdispPPPBag->QueryInterface returned OK
| Pointer to the property bag 257328
| Calling CRRASCommit::CommitRRAS
| Arguments:
| PropertyBag 257328
| bRAS 0
| bVPN 1
| Getting the GUID of the private NIC returned OK
| Private NIC Guid is {B4A1EA13-0A07-4430-AABD-27D02C9C1E4B}
| Checking whether RRAS is already running returned OK
| RRAS already running
| Stopping RRAS returned OK
| Installing RRAS returned OK
| Dhcp server is installed and running on this box
| Enabling DHCP client addressing returned OK
| Configuring ports returned OK
| Identifying the private NIC for RAS returned OK
| Setting the default authentication methods returned OK
| Disabling NETBIOS for RAS returned OK
| Changing RRAS startup type to automatic returned OK
| Configuring Remote Access Policy returned OK
| *** Stopping RRAS again returned ERROR 80070426
| Starting RRAS service returned OK
| Disabling L2TP Ports returned OK
| Saving Dhcp Server IP returned OK
| Saving RRAS method returned OK
| Method is 2
| Where 1 = RAS, 2 = VPN 3 = both
| CRRASCommit::CommitRRAS returned OK
| Committing RRAS returned OK
| Calling CRRASCommit::CommitCMAK
| Arguments:
| PropertyBag 257328
| bRAS 0
| bVPN 1
| Template file name is sbsvpn
| Reading VPN Server name returned OK
| Reading VPN Server name is server01.robertboydarchitects.local
| Created temp directory CMP1029.tmp
| Copying required template files to the temp directory returned OK
| Updating CMP template returned OK
| Updating CMS template returned OK
| Updating SED template returned OK
| Creating proxy configuration file returned OK
| *** Running IExpress to build the package returned ERROR 80070001
| Specifying error location (in CMAK) returned OK
| *** CRRASCommit::CommitCMAK returned ERROR 80070001
| *** CRRASCommit::CommitEx returned ERROR 80070001
|
| Capt. Jack in Texas
|
| Kevin Bacon - Animal House "Remain Calm - All Is Well.... " (Yeah
Right)
|
|
|
|
- References:
- Configure Remote Access Post SBS 2K3 SP1
- From: Captain Jack
- RE: Configure Remote Access Post SBS 2K3 SP1
- From: "Crina Li"
- Configure Remote Access Post SBS 2K3 SP1
- Prev by Date: Re: Windows Server 2003 R2
- Next by Date: Re: Windows Server 2003 R2
- Previous by thread: RE: Configure Remote Access Post SBS 2K3 SP1
- Next by thread: VPN Authentication problems (unable to connect to the network using the user name and password you provided...)
- Index(es):
Relevant Pages
|
Loading
