Re: VPN Broke

So you're just trying to get the previous PPTP VPN connection to work again?
I'd try re-running the Configure Remote Access wizard in the Server Mgmt
Console, Internet and E-Mail section.

If you still get the same result, go to Start -> Administrative Tools ->
Routing and Remote Access. R-click your SBS -> Properties -> Security.
Make sure the Authentication Provider is set to Windows, not RADIUS.

You'll also need to make sure that PPTP is enabled on the SonicWall,
although it sounds like it is since you're getting errors logged on the
server.


"TRD" <tdejohnx2@xxxxxxxxxxx> wrote in message
news:%23CXThoBhGHA.4864@xxxxxxxxxxxxxxxxxxxxxxx
Thank you for responding. Yes there is a an option where you can test the
authentication. I could never get it to authenicate. So I went back to
using the plain old PPTP with SBS2003. That is currently what I am having
troubles with. The system event log is showing alot of the 20189 errors
that I listed in my previous post. I have tried to VPN from inside the
network and I am still unable to connect. I don't know that much about
connection request policies and that is what is being referenced in the
event logs. I have compared the 3 standard access policies from this
server with ones from another server and they are the same. I am at a
lost. Anything ideas?


TIA

TRD




"Dave Nickason [SBS MVP]" <gwdibble@xxxxxxxxxxxxxxxxxxxxxx> wrote in
message news:epStRaAhGHA.1208@xxxxxxxxxxxxxxxxxxxxxxx
I'm not familiar with that particular SonicWall, but it should have a
test button to see if it can authenticate to IAS, right? When you try
that, do you get any kind of a specific error that might point you to
what's going on? Have you enabled the logging in IAS?

I don't think you need a group policy for this as long as IAS is
configured correctly. Is this SBS Premium with ISA? Does SonicWall have
a doc on their support site telling how to configure it to authenticate
with IAS?




"TRD" <tdejohnx2@xxxxxxxxxxx> wrote in message
news:Osb3fT$gGHA.5088@xxxxxxxxxxxxxxxxxxxxxxx
I have been trying to setup IAS to work with a SonicWall 2040. What I am
wanting to do is use the SonicWall VPN client to allow remote access. I
want
to setup the SBS2003 server to authenticate the VPN clients. When I
setup
IAS, I added the SonicWall as a Radius Client and setup a group policy
for
it. I was unable to get the Sonicwall to authenticate to the Radius
server
and now I can't use the sbs2003 vpn. below is the error I am getting in
the
system log when I try to connect with the PPTP VPN. I have looked at the
standard GPO's that are created and they have not changed. I have
deleted
the GP that I created for the SonicWall and still no luck. The end
result is
to use the SonicWall VPN clients and have them authenticate to IAS. Can
someone please assist me?

Event Type: Warning
Event Source: RemoteAccess
Event Category: None
Event ID: 20189
Date: 5/22/2006
Time: 9:28:54 PM
User: N/A
Computer: SERVER
Description:
The user Domain\administrator connected from 00.00.00.00 but failed an
authentication attempt due to the following reason: The connection
attempt
did not match any connection request policy.










.