Re: Remote Access and Setting up a VPN....need some expert advice....

Hi,

Run the Remote Access wizard from the To Do list. Fill in your public IP as
the VPN host. Run Connect to the Internet from the To Do list and enable VPN
in the firewall settings. Apply the Mobile User template to the users that
need VPN access. Forward port 1723 and GRE Protocol 47 from the router to
the external nic IP.

--
Regards,

Marina Roos
Microsoft SBS-MVP
One of the Magical M&M's
www.smallbizserver.net
Take part in SBS forum:
http://www.smallbizserver.net/Default.aspx?tabid=53

"VectorPrime" <NoSpam@xxxxxxxxxxx> schreef in bericht
news:5dtk62tuc7slhq895bn07k4uvf4vaust3l@xxxxxxxxxx
I'm hoping one of you guru's can point me in the right direction. I'm
trying to figure out the best way to provide remote access to our
company server (from home) for a couple of employees. First, here is
the set-up: SBS 2003, two NIC's....one connected to an Efficient
Networks DSL modem/router. The IP of this NIC is 10.10.10.5. The
router provides a 1.5Mbs SDSL connection to the internet. The gateway
(router) address is 10.10.10.1. The second NIC in connected to our
internal network and has an address of 10.0.0.254 (static). This is
effectively the internal address of the server. I also have the
public IP address (internet side) for the router, which is 64.105.X.X,
also static.

I do not use ISA. I can connect to the server via Remote Desktop from
within the internal network, but not from without. Here are my
questions:

1. What is the best solution (safest and easiest) to allow my
employees to acccess the server over the internet? I believe my
choices are VPN, or Remote Desktop. They only need access to the
server, not to their individual desktop.

2. Where can I find a decent set of instruction for setting up this
particular type of access?

I assume that I need to open certain ports in the router, and then
forward them to the SBS server (which NIC do I forward them to?).
Also, we do not have a FQDN for this network. Our internet website is
hosted external to this network. The name of the server takes the
form of companyname.local. Does this pose a problem, or will the
router IP address work for access (I can ping the router IP from
outside the network).

Please forgive the confusion, but I am indeed new to this and I
greatly appreciate all responses.

TIA!



.

Relevant Pages

  • Re: Urgent! New router and big disaster
    ... The SBS DNS server, running on ... its IP it means that your problem is now DNS. ... forward ports to it reliably in the router. ... I should have been more clear about internet connection.. ...
    (microsoft.public.windows.server.sbs)
  • Re: VPN Router
    ... to some router or other device at the Direcway NOC (Network Operations ... Internet Connection Sharing and a 2nd NIC ... the VPN over the satellite is going to be problematic at best. ... RRAS and just dial in when you need to administer the server. ...
    (microsoft.public.windows.server.sbs)
  • Re: Urgent! New router and big disaster
    ... I checked the binding order and the Server Local area connection is at the top. ... I should have been more clear about internet connection.. ... I wonder if I may have missed a firewall setting on the router as well. ...
    (microsoft.public.windows.server.sbs)
  • RE: Small network with lots of features, questions
    ... Your network sounds overly complicated to me. ... to get to the internet. ... To do that, without using your server as a router, you need ...
    (microsoft.public.windows.server.networking)
  • Re: Urgent! New router and big disaster
    ... I checked the router, I am running a laptop off of it so I can post. ... Les Connor [SBS Community Member - SBS MVP] ... make sure the DHCP Client Service is running on the server. ... First Page of the Internet Connection Wizard, ...
    (microsoft.public.windows.server.sbs)