Re: CEICW ERRORS WHEN RUN

Here is the IPCONFIG /all screen:
Windows IP Configuration

Host Name . . . . . . . . . . . . : libertyrs-main
Primary Dns Suffix . . . . . . . : LibertyRS.local
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : Yes
DNS Suffix Search List. . . . . . : LibertyRS.local

Ethernet adapter Server Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : HP NC7781 Gigabit Server Adapter
Physical Address. . . . . . . . . : 00-12-79-CE-9A-DA
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.16.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 192.168.16.2
Primary WINS Server . . . . . . . : 192.168.16.2

PPP adapter RAS Server (Dial In) Interface:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
Physical Address. . . . . . . . . : 00-53-45-00-00-00
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.16.32
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Disabled

Ethernet adapter External Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : HP NC7771 Gigabit Server Adapter
Physical Address. . . . . . . . . : 00-13-21-E9-18-4C
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.25
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 192.168.16.2
Primary WINS Server . . . . . . . : 192.168.0.25
NetBIOS over Tcpip. . . . . . . . : Disabled

A brief description of the probelms are I cannot get RWW to work from the
outside. I can get it to work inside but not outside. Set up is SBS2k3
Premimum sp1 with all patches as of last friday. ISA2k4 sp1 have not
installed sp2 heard not a good idea on SBS2k3 with all other patches. 2 nics
internal 192.168.16.2 external 192.168.0.25. FQDN
www.libertyrecordsearch.com, DNS "A" record for
"libertyrs-main.libertyrecordsearch.com" pointing to our public IP adress of
12.109.102.62. At one point today I was able from within the LAN to enter
"https://192.168.0.25/remote"; and get into RWW. now I can't I have rerun
CEICW since I could get in nad I am not changing anything else right now.

Connected to the internet via cable modem through a NetGear FVS318 router.
Router address 192.168.0.1. You can read some of the other posts if they will
help. the last one was "Problem with getting RWW setup" on 4/6/06. I changed
the IP address of my network this past weekend in order to accomidate field
people that were having problems with a VPN connection.( long story about not
listening to instructions).
Hope this helps. would like to get this up and running. If you need more
info let me know. In advance let me say thank you to all of you folks out
there that help us neophytes out.


"SuperGumby [SBS MVP]" wrote:

it certainly may be worth trying removal of ISA, restart, re-instal, though
in general I wouldn't expect this to be necessary.

Before you do, what's a brief rundown of your other problems? Also, the
output from 'IPConfig /all' for the SBS might be handy. How are you
connected to internet?

"jmillerWV" <jmillerWV@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:4E5C339B-9FD4-48D7-82EE-182E62B648F3@xxxxxxxxxxxxxxxx
After you click on the finish button and the progress screen comes up
stating
that it is configuring the email, then the firewall and so on it places a
red
"X" beside the firewall configuration and says the it could not configure
the
firewall that there were errors then asks if you want to procees? and I
answer yes. it is the firewall configuration that it fails on everytime I
run
it. Do I need to re install ISA AGAIN?

"SuperGumby [SBS MVP]" wrote:

I have 23 rules in ISA, including the default deny and a couple of custom
rules. So yes, it sounds like your setup is similar and should be
correct.

In what way does the wiz error?

"jmillerWV" <jmillerWV@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:61FFB3DA-807A-4970-9483-004D7A4D6F07@xxxxxxxxxxxxxxxx
I really need some help here. I am having nothing but trouble with
SBS2k4
and
it is driving me crazy. I rerun CEICW by instructin from folks who are
helping with differnet posts on RWW connection problems. Each time I
rerun
it
I keep getting errors when it gets to the firewall configuration part
after
you click the finish button. ISA server managment console is NOT open
at
the
time. What my be wrong?

Also when I reinstalled ISA2k4 about 3 weeks ago and ran CEICW It set
up
about 24 rules dealing with Share point Services Publishing rule, FTP
server
access rule, FTP outbound access rule, RDP rules, PPTP rules, smtp
rule,
NNTP, POP3, Localhost DHCPand so on. Question are all these required
and
should any new rules be put in front of these?






.