RE: Cannot use Email notifier MMM3

Hi Tony,

Thanks for using the SBS newsgroup.

From your description, I understand the issue to be: Magic Mail
Monitor(MMM3) can not work on the SBS server box. If I am off base, please
don't hesitate to let me know.

Have you enabled the Pop3 service on the SBS server box? By default, the
service is disabled. You can refer to the following steps to turn on the
Exchange POP3 service, then please test the issue again to see if it is
resolved.

To turn on the Microsoft Exchange POP3 service on the SBS 2003 server box,
follow these steps:

1. Click Start, point to Programs, click Administrative Tools, and then
click Services.
2. Double-click Microsoft Exchange POP3.
3. In the Startup-type box, click Automatic, click Apply, and then click
Start.
4. Close the Services console.
5. Click Start, and then click Server Management.
6. In the left pane, expand To Do List.
7. In the right pane, click Connect to the Internet.
8. After the Configure E-mail and Internet Connection Wizard starts, follow
the instructions until you reach the Firewall page.
9. Click Enable Firewall, and then click Next.
10. Click Add.
11. Type Microsoft Exchange POP3 in the Service name box, click TCP in the
Protocol box, type 110 in the Port box, and then click OK.
12. Click Next, and then complete the Configure E-mail and Internet
Connection Wizard.

More information:

The default POP3 and IMAP4 virtual servers are stopped and you cannot
connect to the POP3 and the IMAP4 services in Windows Small Business Server
2003
http://support.microsoft.com/?id=837368

And also the default POP3 Virtual server should listening on all Unassigned
IPs

1. Open ESM, locate the node (Exchange System Manager -> Administrative
Groups -> first administrative group -> Servers -> Protocols -> Pop3 ->
default POP3 Virtual server).
2. Right click the default POP3 Virtual server -> Properties page ->
General -> IP address -> all Unassigned (TCP 110, SSL 995).

Then please test the issue again, how about the result?

If the issue persists, let us perform the following test:

I. Please test if the POP3 service is enabled using command "telnet
server_public_IP 110" (no quotation marks) from a remote client
workstation.

If we get the following message on the command prompt, POP3 should work
fine:

+OK Microsoft Exchange Server 2003 POP3 server version 6.5.7226.0 (<IP
Address> or <Public FQDN>) ready.

Please capture a screen shot of the test output and upload to the newsgroup
or mail to my working mailbox: v-yanniw@xxxxxxxxxxxxx

II. Use Outlook Express to verify connectivity to the POP3 server (the SBS
2003 server box):

To configure Outlook Express, follow these steps:

1. Click Start, point to All Programs, and then click Outlook Express.
2. If this is the first time that you have started Outlook Express and if
the Outlook Express Internet Connection Wizard starts, go to step 5.
3. On the Tools menu, click Accounts, and then click the Mail tab.
4. Click Add, and then click Mail.
5. In the Display name box, type your name in the format that you want your
e-mail recipients to see, and then click Next.
6. In the E-mail address box, type your e-mail alias, and then click Next.
7. Leave the POP3 selection in the My incoming mail server is a list, and
then type the remote POP3 server's fully qualified domain name in the
Incoming mail (POP3, IMAP, or HTTP) server box. For example, type
pop.fabrikam.com.
8. In the Outgoing mail (SMTP) server box, type the fully qualified domain
name of your Windows Small Business Server-based computer. For example,
type mail.contoso.local.
9. Click Next, type your POP3 e-mail account name in the Account name box,
type the password that you use to access the remote POP3 server in the
Password box, click Next, and then click Finish.
10. Click the account that you just created, and then click Properties.
11. Click the Advanced tab, click to select the Leave a copy of messages on
server check box, and then click OK.
12. Click Close to quit the Internet Accounts dialog box.
13. On the Tools menu, point to Send and Receive, and then click the POP3
e-mail account that you just created.

What is the result? Can you retrieve emails properly? If not, please help
me capture a screen shot of the error message.

If emails can be retrieved properly by OE, the issue should lies in the
Magic Mail Monitor, I would like to suggest that you contact the
application vendor for support. They are more familiar with their own
application than us. Thanks for your understanding.

Have a nice day!

Sincerely,

Jenny Wu
Microsoft CSS Online Newsgroup Support
Get Secure! - www.microsoft.com/security
======================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.
======================================================
This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------
Thread-Topic: Cannot use Email notifier MMM3
thread-index: AcZRKdug6TgQ08F+Shifd3pFOoLYPA==
X-WBNR-Posting-Host: 66.92.232.198
From: =?Utf-8?B?VG9ueSBHaXJnZW50aQ==?=
<TonyGirgenti@xxxxxxxxxxxxxxxxxxxxxxxxx>
Subject: Cannot use Email notifier MMM3
Date: Sun, 26 Mar 2006 15:06:04 -0800
Lines: 18
Message-ID: <2B809F3F-940A-484D-ABF0-E308BC90551A@xxxxxxxxxxxxx>
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.1830
Newsgroups: microsoft.public.windows.server.sbs
NNTP-Posting-Host: TK2MSFTNGXA02.phx.gbl 10.40.2.250
Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGXA02.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.server.sbs:255749
X-Tomcat-NG: microsoft.public.windows.server.sbs

Hello.

When logged into SBS2000 server, i was able to use a program called Magic
Mail Monitor(MMM3) from SourceForge.net. It allows me to look at my
emails
before downloading them.

We are tesing a new SBS2003, ISA2004, two nics, static IP, Zywall10
firewall. When i log on to the new SBS2003 server, i can use the
internet,
but it will not allow me to use MMM3. It does not get the emails. MMM3
use
port 110 for POP3 emails.

Does anybody know how to get this program to work on SBS2003 ?

Any help would be gratefully appreciated.

Thanks,
Tony



.

Relevant Pages

  • Re: Some Questions
    ... remote pop3 which is hosted by Burst Data in Philadelphia. ... server from an outside connection. ... Logon to one of the client workstations in the SBS network. ... = e = Restart the Microsoft Connector for POP3 Mailboxes. ...
    (microsoft.public.windows.server.sbs)
  • RE: SBS 2003 sudden services problem over router based vpn
    ... I understand that your remote cannot receive POP3 emails through VPN ... SBS Server through routers. ...
    (microsoft.public.windows.server.sbs)
  • Re: Cant send or receive e-mail to POP3 users on same domain--HELP!
    ... they are users who are all using the same Exchange ... "It can't seem to send messages to ANY POP3 ... thus do not use the Exchange server at all. ... you add the all individual user POP3 mailboxes into the POP3 Connector ...
    (microsoft.public.windows.server.sbs)
  • Re: SBS 2003 POP Connector eating emails
    ... OK sounds like you didn't use the SBS POP3 wizard when configuring the POP3 ... Do you have Exchange installed correctly on your SBS server? ... setup wizard protion of your SBS install. ...
    (microsoft.public.windows.server.general)
  • RE: is there a windows or exchange equivalent of fetchmail?
    ... SBC email account and put it on a local exchange mailbox. ... In SBS Server, we can use the POP3 Connector to ... retrieve incoming email from ISP POP3 mailboxes. ...
    (microsoft.public.windows.server.sbs)