Re: ceicw failure on e-mail config

There isn't a router on the network, right? So, it's just 2 NICs in the
server and you're using ISA 2004 as you your firewall. And your network is
physically configured the same as this diagram:

http://www.smallbizserver.net/Articles/tabid/266/articleType/ArticleView/articleId/77/Two-Nics-a-static-IP-address-ISA-no-router.aspx

--
Merv Porter [SBS MVP]
===================================

"Jeff Murphy" <jmurphy@xxxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:OpSVehVSGHA.4608@xxxxxxxxxxxxxxxxxxxxxxx
The service pack is included on the disks.

"Merv Porter [SBS-MVP]" <mwport@xxxxxxxxxxxxxxxxxxx> wrote in message
news:%23mrtPeVSGHA.2300@xxxxxxxxxxxxxxxxxxxxxxx
Does this server have SBS 2003 SP1 and ISA 2004 installed? And did you
install them according to:

How to install Service Pack 1 for SBS 2003
http://www.smallbizserver.net/Articles/tabid/266/articleType/ArticleView/articleId/68/How-to-install-Service-Pack-1-for-SBS-2003.aspx

--
Merv Porter [SBS MVP]
===================================

"Jeff Murphy" <jmurphy@xxxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:uaN95RVSGHA.4792@xxxxxxxxxxxxxxxxxxxxxxx
Microsoft Windows [Version 5.2.3790]
(C) Copyright 1985-2003 Microsoft Corp.

C:\Documents and Settings\Administrator.FLOCKTEX>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : ftsbs2000
Primary Dns Suffix . . . . . . . : flocktex.local
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : Yes
DNS Suffix Search List. . . . . . : flocktex.local

Ethernet adapter Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network
Connection #
2
Physical Address. . . . . . . . . : 00-14-22-79-71-81
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 204.17.80.56
Subnet Mask . . . . . . . . . . . : 255.255.255.240
Default Gateway . . . . . . . . . : 204.17.80.49
DNS Servers . . . . . . . . . . . : 192.168.16.2
NetBIOS over Tcpip. . . . . . . . : Disabled

Ethernet adapter Server Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network
Connection
Physical Address. . . . . . . . . : 00-14-22-79-71-80
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.16.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 192.168.16.2
Primary WINS Server . . . . . . . : 192.168.16.2

C:\Documents and Settings\Administrator.FLOCKTEX>
"Merv Porter [SBS-MVP]" <mwport@xxxxxxxxxxxxxxxxxxx> wrote in message
news:%23R6ZsKVSGHA.5884@xxxxxxxxxxxxxxxxxxxxxxx
Hmmm... Can you post an ipconfig /all for the server?

--
Merv Porter [SBS MVP]
===================================
"Jeff Murphy" <jmurphy@xxxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:O05C2EVSGHA.336@xxxxxxxxxxxxxxxxxxxxxxx

3/16/2006 5:52 PM
C:\Program Files\Microsoft Windows Small Business
Server\Networking\ICW\wizinet.dll, version 5.2.2893.0
calling CNetCommit::ValidatePropertyBag ().
Call to Querying for the property bag () returned ok.
Call to Reading hardware selection () returned ok.
Hardware selection: 0
Call to Validating hardware selection () returned ok.
Call to Initializing the Stingray util in ValidateNICProperties ()
returned ok.
Call to Reading LAN NIC Guid () returned ok.
LAN NIC Guid: {38834AA0-E6E6-45C9-9DAD-72EB9FAC2C70}
Call to Validating LAN NIC Guid () returned ok.
Call to Getting the IP address for the LAN NIC () returned ok.
LAN NIC IP: 192.168.16.2
Call to Validating NIC properties () returned ok.
Broadband selection: 0
Call to Validating broadband selection () returned ok.
calling CNetCommit::ValidateFulltimeConnectionProperties ().
Call to Initializing the Stingray util in ValidateNICProperties ()
returned ok.
Call to Reading LAN NIC Guid () returned ok.
LAN NIC Guid: {38834AA0-E6E6-45C9-9DAD-72EB9FAC2C70}
Call to Validating LAN NIC Guid () returned ok.
Call to Getting the IP address for the LAN NIC () returned ok.
LAN NIC IP: 192.168.16.2
Call to Reading 2nd NIC Guid () returned ok.
External NIC Guid: {8E7C2A78-3E39-4002-9F06-6EC70F5AD05A}
Call to Validating external NIC Guid () returned ok.
Call to Validating the external IP against LAT () returned ok.
Call to Validating NIC properties () returned ok.
Call to Reading Default Gateway () returned ok.
Default Gateway: 204.17.80.49
Call to Validating Default Gateway IP () returned ok.
Call to Reading preferred DNS server IP () returned ok.
Preferred DNS server: 68.9.16.30
Call to Validating prefferred DNS server IP () returned ok.
Call to Reading alternate DNS server IP () returned ok.
Alternate DNS server: 68.13.16.30
Call to Validating alternate DNS server IP () returned ok.
Call to Validating preferred & alternate DNS servers () returned ok.

3/16/2006 5:52 PM
C:\Program Files\Microsoft Windows Small Business
Server\Networking\ICW\wizproxy.dll, version 5.2.2893.0
CStingrayCommit::ValidatePropertyBag
Call to Querying for IPropertyPagePropertyBag () returned ok.
Call to Initializing the StringrayUtil () returned ok.
Call to Reading the firewall selection () returned ok.
Firewall selection: 1
CStingrayCommit::ValidateUpnpProperties
Error 0x80070057 returned from call to Reading the UPNP selection().
Skipping upnp validation
Call to CStingrayCommit::ValidateUpnpProperties () returned ok.
Call to Validating Upnp properties () returned ok.
CStingrayCommit::ValidatePortMappings
Call to Reading the port mappings () returned ok.
Call to Loading port mappings XML () returned ok.
Call to Validating the predefined port mappings XML () returned ok.
Call to Reading the custom port mappings () returned ok.
Loading port mapping XML
Call to Validating the custom port mappings XML () returned ok.
Call to CStingrayCommit::ValidatePortMappings () returned ok.
Call to Validating port mappings () returned ok.
CStingrayCommit::ValidateWebPublishingRules
Call to Reading web publishing selection () returned ok.
Call to Validating Web publishing selections () returned ok.
Web publishing selections:
OWA publishing: 1
RUP publishing: 0
Monitoring publishing: 0
OMA publishing: 0
RPC publishing: 0
Sharepoint publishing: 0
ROOT publishing: 0
Call to CStingrayCommit::ValidateWebPublishingRules () returned ok.
Call to Validating web publishing rules () returned ok.
Call to CStingrayCommit::ValidatePropertyBag () returned ok.

3/16/2006 5:52 PM
C:\Program Files\Microsoft Windows Small Business
Server\Networking\ICW\wizcert.dll, version 5.2.2893.0
Calling CCertCommit::ValidatePropertyBag
Require SSL for OWA: 1
Require SSL for Remote Portal: 1
Require SSL for Monitoring: 0
Require SSL for OMA: 0
Require SSL for CompanyWeb: 0
Require 128 Bit Encryption: 1
Cert selection: -1
CCertCommit::ValidatePropertyBag returned OK

3/16/2006 5:52 PM
C:\Program Files\Microsoft Windows Small Business
Server\Networking\ICW\wizemail.dll, version 5.2.2893.0
calling CEmailCommit::ValidatePropertyBag ().
calling pdispPPPBag->QueryInterface (IPropertyPagePropertyBag,
0x6e50c).
Call to pdispPPPBag->QueryInterface () returned ok.
calling ReadInt4 (0x259850, DB5E5E45-3598-4F1D-8FF7-0ED35B9EB6A4).
Call to ReadInt4 () returned ok.
The out param of ReadInt4() is 1.
calling CValidatePropertyUtil.ValidatePropertyInteger ().
Call to CValidatePropertyUtil.ValidatePropertyInteger () returned ok.
calling ReadBool (0x259850, F71526DD-9C19-4fe9-B7DB-FD4360909275).
Call to ReadBool () returned ok.
The out param of ReadBool() is 1.
calling CValidatePropertyUtil.ValidatePropertyBool ().
Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
calling ReadBool (0x259850, DB5E5E46-3598-4F1D-8FF7-0ED35B9EB6A4).
Call to ReadBool () returned ok.
The out param of ReadBool() is 0.
calling CValidatePropertyUtil.ValidatePropertyBool ().
Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
calling ReadBool (0x259850, 1DB7A50F-98F8-452f-868B-1AAC56585DD0).
Call to ReadBool () returned ok.
The out param of ReadBool() is 1.
calling CValidatePropertyUtil.ValidatePropertyBool ().
Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
calling ReadInt4 (0x259850, C9D8697B-0D4C-4767-8F1F-4CE415098774).
Call to ReadInt4 () returned ok.
The out param of ReadInt4() is 0x2.
calling CValidatePropertyUtil.ValidatePropertyLong ().
Call to CValidatePropertyUtil.ValidatePropertyLong () returned ok.
calling ReadString (0x259850, 01637C90-B142-41C4-8520-6B2E0F891BE7).
Call to ReadString () returned ok.
The out param of ReadString() is flocktex.com.
calling ReadBool (0x259850, 1DB7A50F-98F8-452f-868B-1AAC56585DD0).
Call to ReadBool () returned ok.
The out param of ReadBool() is 1.
calling ReadInt4 (0x259850, C9D8697B-0D4C-4767-8F1F-4CE415098774).
Call to ReadInt4 () returned ok.
The out param of ReadInt4() is 0x2.
calling CValidatePropertyUtil.ValidatePropertyHostName ().
Call to CValidatePropertyUtil.ValidatePropertyHostName () returned ok.
calling AttachCommiter.Validate(pPPPBag) (0x259850,
01637C90-B142-41C4-8520-6B2E0F891BE7).
calling CAttachCommiter::Validate (0x259850).
calling CAttachCommiter::Validate:ReadVariant (0x0).
calling CAttachCommiter::Validate:m_spDoc.CoCreateInstance (0x0).
calling CAttachCommiter::Validate:m_spDoc->loadXML (0x0).
Call to CAttachCommiter::Validate () returned ok.
Call to CEMailCommit::ValidatePropertyBag () returned ok.
calling CNetCommit::Commit (2463824).
calling CNetCommit::ValidatePropertyBag ().
Call to Querying for the property bag () returned ok.
Property bag is not dirty, skipping validation
calling CNetCommit::Common ().
calling CNetCommit::GetLanNicInfo ().
LAN NIC Guid: {38834AA0-E6E6-45C9-9DAD-72EB9FAC2C70}
Call to Converting LAN NIC Guid () returned ok.
Call to Getting IP address for the LAN NIC () returned ok.
Call to Reading in the LAN NIC info () returned ok.
Call to Fixing the TCP/IP NIC Binding order () returned ok.
Dhcp server is installed and not disabled
Call to Set DHCP Server to start up automatically () returned ok.
DNS server is installed and not disabled
Call to Changing startup type for DNS () returned ok.
Call to Clearing DNS server entries on the LAN NIC () returned ok.
Call to Setting DNS server IP for the LAN NIC () returned ok.
Call to Resetting DNS recursion timeout () returned ok.
Call to Resetting client dns query timouts in config.dat () returned
ok.
Call to DsGetDcName for local domain name () returned ok.
calling CNetCommit::DoFulltime ().
Call to Converting external NIC guid () returned ok.
Call to Clearing default gateway on the LAN NIC () returned ok.
Error 0x1 returned from call to Setting the default gateway on the
external NIC().
Call to Setting DNS forwarders () returned ok.
Call to Preparing for DNS listener reset () returned ok.
Call to Resetting DNS listeners () returned ok.
Call to Clearing DNS server entries on the external NIC () returned
ok.
Call to Making sure the DNS entries on the external NIC points to the
local DNS server () returned ok.
Call to GetLocalDomainName () returned ok.
Call to Deleting the DNS record for the external NIC () returned ok.
Call to Disabling net services on the external NIC () returned ok.
Call to Turning off dns registration on the external NIC () returned
ok.
Call to Disabling NetBIOS for the external NIC () returned ok.
Call to CNetCommit::DoFulltime () returned ok.
Call to Configuring for fulltime connection () returned ok.
calling ConfigureIE ().
calling SetInternetOptions ((null), FTSBS2000:8080, <local>).
calling InternetSetOptionA (NULL,
INTERNET_OPTION_PER_CONNECTION_OPTION).
Call to InternetSetOptionA () returned ok.
Call to SetInternetOptions () returned ok.
calling InternetSetOption_AutodialConnection ().
Call to InternetSetOption_AutodialConnection () returned ok.
calling InternetSetOption_AutodialMode (1).
Call to InternetSetOption_AutodialMode () returned ok.
calling InternetSetOption_DisableAutodial (1).
Call to InternetSetOption_DisableAutodial () returned ok.
Call to ConfigureIE () returned ok.
Call to Configuring IE for fulltime connection () returned ok.
Call to Notifying client setup for Default gateway as the SBS server
() returned ok.
Call to Initializing the Stingray util () returned ok.
Call to Turning Stingray autodial off () returned ok.
ISA2k Autodial rule does not exist, ignoring the error
Call to CNetCommit::RemoveISA2kAutodialRule () returned ok.
Call to Removing ISA autodial rule ROUTINGRULE_AUTODIAL () returned
ok.
ISA2k Autodial rule does not exist, ignoring the error
Call to CNetCommit::RemoveISA2kAutodialRule () returned ok.
Call to Removing ISA autodial rule ROUTINGRULE_INTERNALAUTODIAL ()
returned ok.
Call to CNetCommit::RemoveISA2kRelatedAutodialRules () returned ok.
Call to Removing ISA2k related autodial rules () returned ok.
calling RegisterMSBOExchangeBP (0).
Error 0x1 returned from call to RegisterMSBOExchangeBP().
Call to Unregistering the smtp sink () returned ok.
Call to Initializing the Stingray util in CreateLANAccessRule ()
returned ok.
Call to Creating the protected networks access rule () returned ok.
Call to Saving ISA2k4 changes () returned ok.
Call to GetLocalDomainName () returned ok.
Call to Reading in the local domain name () returned ok.
Local Domain Name is: flocktex.local
Call to Enabling secure dynamic DNS updates () returned ok.
Call to Disabling RoundRobin for DNS server () returned ok.
Call to GetLocalDomainName () returned ok.
Call to Configuring DHCP options () returned ok.
Call to Disabling the RASUTO service () returned ok.
Call to Configuring w32time parameters for fulltime () returned ok.
Call to Configuring the time service () returned ok.
Call to Notifying RWW for ISA () returned ok.
Call to CNetCommit::Common () returned ok.
Call to CNetCommit::Commit () returned ok.
CStingrayCommit::CommitEx
CStingrayCommit::ValidatePropertyBag
Call to Querying for IPropertyPagePropertyBag () returned ok.
Call to Initializing the StringrayUtil () returned ok.
Call to Reading the firewall selection () returned ok.
Firewall selection: 1
CStingrayCommit::ValidateUpnpProperties
Error 0x80070057 returned from call to Reading the UPNP selection().
Skipping upnp validation
Call to CStingrayCommit::ValidateUpnpProperties () returned ok.
Call to Validating Upnp properties () returned ok.
CStingrayCommit::ValidatePortMappings
Call to Reading the port mappings () returned ok.
Call to Loading port mappings XML () returned ok.
Call to Validating the predefined port mappings XML () returned ok.
Call to Reading the custom port mappings () returned ok.
Loading port mapping XML
Call to Validating the custom port mappings XML () returned ok.
Call to CStingrayCommit::ValidatePortMappings () returned ok.
Call to Validating port mappings () returned ok.
CStingrayCommit::ValidateWebPublishingRules
Call to Reading web publishing selection () returned ok.
Call to Validating Web publishing selections () returned ok.
Web publishing selections:
OWA publishing: 1
RUP publishing: 0
Monitoring publishing: 0
OMA publishing: 0
RPC publishing: 0
Sharepoint publishing: 0
ROOT publishing: 0
Call to CStingrayCommit::ValidateWebPublishingRules () returned ok.
Call to Validating web publishing rules () returned ok.
Call to CStingrayCommit::ValidatePropertyBag () returned ok.
Call to Validating the property bag () returned ok.
Call to Reading the guid for the LAN NIC () returned ok.
Call to Getting the IP address for the LAN NIC () returned ok.
Call to Getting the SM for the LAN NIC () returned ok.
LAN NIC Info:
Guid: {38834AA0-E6E6-45C9-9DAD-72EB9FAC2C70}
IP: 192.168.16.2
SM: 255.255.255.0
Call to Removing RRAS NAT () returned ok.
CStingrayCommit::DoGeneralConfiguration
Call to Removing SBS access rules () returned ok.
Call to SBS MS Update Access Rule () returned ok.
Call to Creating SBS Internet Access Rule () returned ok.
Call to Setting default logon domain for OMA () returned ok.
Call to Configuring anonymous access for SBS dirs () returned ok.
Call to Disabling auto discovery () returned ok.
Call to Configuring IIS to listen only on the LAN () returned ok.
Call to Setting local domain name () returned ok.
Call to Disabling H323 application filter () returned ok.
Call to Enabling active caching () returned ok.
Call to Setting up web proxy listeners () returned ok.
Call to CStingrayCommit::DoGeneralConfiguration () returned ok.
Call to Doing general configuration () returned ok.

3/16/2006 5:52 PM
Firewall Rule: SBS DHCP Client
Cannot find the firewall rule, ignoring the error
Firewall Rule: SBS HTTP 80 Out CustomFilter
Cannot find the firewall rule, ignoring the error
Firewall Rule: SBS FTP 20 In CustomFilter
Cannot find the firewall rule, ignoring the error
Firewall Rule: SBS FTP 20 Out CustomFilter
Cannot find the firewall rule, ignoring the error
Firewall Rule: SBS POP3 110 Out CustomFilter
Cannot find the firewall rule, ignoring the error
Firewall Rule: SBS NTP 123 Out CustomFilter
Cannot find the firewall rule, ignoring the error
Firewall Rule: SBS DnsLookupPredefinedType
Cannot find the firewall rule, ignoring the error
Firewall Rule: SBS IcmpPingQueryPredefinedType
Cannot find the firewall rule, ignoring the error
Firewall Rule: SBS IdentdPredefinedType
Cannot find the firewall rule, ignoring the error
Firewall Rule: SBS TS 3389 In CustomFilter
Cannot find the firewall rule, ignoring the error
Firewall Rule: SBS TS 3389 Out CustomFilter
Cannot find the firewall rule, ignoring the error
Firewall Rule: SBS PptpReceivePredefinedType
Cannot find the firewall rule, ignoring the error
Firewall Rule: SBS PptpCallPredefinedType
Cannot find the firewall rule, ignoring the error
Firewall Rule: SBS FTP 21 In CustomFilter
Cannot find the firewall rule, ignoring the error
Firewall Rule: SBS FTP 21 Out CustomFilter
Cannot find the firewall rule, ignoring the error
Firewall Rule: SBS SMTP 25 Out CustomFilter
Cannot find the firewall rule, ignoring the error
Firewall Rule: SBS SmtpPredefinedType
Cannot find the firewall rule, ignoring the error
Firewall Rule: SBS NNTP 119 Out CustomFilter
Cannot find the firewall rule, ignoring the error
Firewall Rule: SBS Remote Web Workplace CustomFilter
Cannot find the firewall rule, ignoring the error
Firewall Rule: SBS NTP 123 Out CustomFilter
Cannot find the firewall rule, ignoring the error
Firewall Rule: Small Business RPC over HTTP Publishing Rule
Cannot find the firewall rule, ignoring the error
Firewall Rule: Small Business Business Card Publishing Rule
Cannot find the firewall rule, ignoring the error
Firewall Rule: Small Business CompanyWeb Publishing Rule
Cannot find the firewall rule, ignoring the error
Firewall Rule: Small Business TSWEB Publishing Rule
Cannot find the firewall rule, ignoring the error
Firewall Rule: Small Business RUP Publishing Rule
Cannot find the firewall rule, ignoring the error
Firewall Rule: Small Business Monitoring Publishing Rule
Cannot find the firewall rule, ignoring the error
Firewall Rule: Small Business OMA Publishing Rule
Cannot find the firewall rule, ignoring the error
Firewall Rule: Small Business OWA Web Publishing Rule
Cannot find the firewall rule, ignoring the error
Firewall Rule: Small Business Web Publishing Rule
Cannot find the firewall rule, ignoring the error
Firewall Rule: Small Business Server All Users Protocol Rule
Cannot find the firewall rule, ignoring the error
Firewall Rule: Small Business Internet Access Protocol Rule
Cannot find the firewall rule, ignoring the error
Firewall Rule: Small Business Internet Access Protocol Rule 2
Cannot find the firewall rule, ignoring the error
Firewall Rule: Small Business Server Internet Access Site and Content
Rule
Cannot find the firewall rule, ignoring the error
Firewall Rule: Small Business Server Internet Access Site and Content
Rule 2
Cannot find the firewall rule, ignoring the error
Firewall Rule: Small Business Server All Users Site and Content Rule
Cannot find the firewall rule, ignoring the error
Call to Removing ISA2k related firewall rules () returned ok.
Custom protocol name: SBS FTP 20 In CustomFilter
Cannot find the custom protocol, ignoring the error
Custom protocol name: SBS FTP 20 Out CustomFilter
Cannot find the custom protocol, ignoring the error
Custom protocol name: SBS NTP 123 Out CustomFilter
Cannot find the custom protocol, ignoring the error
Custom protocol name: SBS Remote Web Workplace CustomFilter
Cannot find the custom protocol, ignoring the error
Call to Removing ISA2k related custom protocols () returned ok.
Call to Removing inbound access rule allowing anybody in () returned
ok.
Call to Removing inbound access rule allowing anybody out () returned
ok.
CStingrayCommit::CommitPortMappings
CStringray::RemoveAllSpecialRules
Call to Resetting the rule enumeration () returned ok.
Call to MoveToNextSpecialRule () returned ok.
Call to Getting the special rule info () returned ok.
Removing the access rule SBS RWW Inbound Access Rule
Call to Removing the access rule () returned ok.
Call to MoveToNextSpecialRule () returned ok.
Call to Getting the special rule info () returned ok.
Removing the access rule SBS FTP Outbound Access Rule
Call to Removing the access rule () returned ok.
Call to MoveToNextSpecialRule () returned ok.
Call to Getting the special rule info () returned ok.
Removing the access rule SBS RDP Outbound Access Rule
Call to Removing the access rule () returned ok.
Call to MoveToNextSpecialRule () returned ok.
Call to Getting the special rule info () returned ok.
Removing the access rule SBS Smtp Server Access Rule
Call to Removing the access rule () returned ok.
Call to MoveToNextSpecialRule () returned ok.
Call to Getting the special rule info () returned ok.
Removing the access rule SBS POP3 Outbound Access Rule
Call to Removing the access rule () returned ok.
Call to MoveToNextSpecialRule () returned ok.
Call to Getting the special rule info () returned ok.
Removing the access rule SBS Localhost Dhcp Access Rule
Call to Removing the access rule () returned ok.
Call to MoveToNextSpecialRule () returned ok.
Call to CStringray::RemoveAllSpecialRules () returned ok.
Call to Removing all special firewall rules () returned ok.
CStingrayCommit::CreateStandardPortMappings
Call to Enabling the DHCP system policy () returned ok.
Call to Enabling the CRL download system policy () returned ok.
Call to Creating the DHCP access rule () returned ok.
Call to Disabling ICMP () returned ok.
Call to CStingrayCommit::CreateStandardPortMappings () returned ok.
Call to Creating the standard filters () returned ok.
CStingrayCommit::CreatePortMappingsFromXML
Call to Resetting the port mapping list () returned ok.
Call to Getting the number of port mappings () returned ok.
Number of port mappings 5
Call to Getting the next port mapping () returned ok.
Call to Reading Port () returned ok.
Call to Reading Protocol () returned ok.
Call to Reading Direction () returned ok.
Call to Validating TCP direction () returned ok.
Call to Reading Enable () returned ok.
Call to Getting the name for the predefined port mapping () returned
ok.
Call to Creating tcp port mapping protocol () returned ok.
Call to Creating the outbound SMTP access rule () returned ok.
Call to Creating the outbound POP3 access rule () returned ok.
Call to Creating the outbound NNTP access rule () returned ok.
Call to Handling predefined port mapping () returned ok.
Creating access rule SBS Smtp Server Access Rule TCP 25 returned 0
Call to Getting the next port mapping () returned ok.
Call to Reading Port () returned ok.
Call to Reading Protocol () returned ok.
Call to Reading Direction () returned ok.
Call to Validating TCP direction () returned ok.
Call to Reading Enable () returned ok.
Skipping the port mapping for Port 1723
Call to Creating the outbound PPTP access rule () returned ok.
Call to Handling predefined port mapping () returned ok.
Call to Creating outbound PPTP access rule () returned ok.
Call to Getting the next port mapping () returned ok.
Call to Reading Port () returned ok.
Call to Reading Protocol () returned ok.
Call to Reading Direction () returned ok.
Call to Validating TCP direction () returned ok.
Call to Reading Enable () returned ok.
Call to Getting the name for the predefined port mapping () returned
ok.
Call to Creating tcp port mapping protocol () returned ok.
Call to Creating the outbound RDP access rule () returned ok.
Call to Handling predefined port mapping () returned ok.
Creating access rule SBS RDP Server Access Rule TCP 3389 returned 0
Call to Getting the next port mapping () returned ok.
Call to Reading Port () returned ok.
Call to Reading Protocol () returned ok.
Call to Reading Direction () returned ok.
Call to Validating TCP direction () returned ok.
Call to Reading Enable () returned ok.
Call to Getting the name for the predefined port mapping () returned
ok.
Call to Creating tcp port mapping protocol () returned ok.
Call to Creating the outbound FTP access rule () returned ok.
Call to Handling predefined port mapping () returned ok.
Creating access rule SBS FTP Server Access Rule TCP 21 returned 0
Call to Getting the next port mapping () returned ok.
Call to Reading Port () returned ok.
Call to Reading Protocol () returned ok.
Call to Reading Direction () returned ok.
Call to Validating TCP direction () returned ok.
Call to Reading Enable () returned ok.
Skipping the port mapping for Port 80
Call to CStingrayCommit::CreatePortMappingsFromXML () returned ok.
Call to Creating predefined port mappings () returned ok.
CStingrayCommit::CreatePortMappingsFromXML
Call to Resetting the port mapping list () returned ok.
Call to Getting the number of port mappings () returned ok.
Number of port mappings 1
Call to Getting the next port mapping () returned ok.
Call to Reading Port () returned ok.
Call to Reading Protocol () returned ok.
Call to Reading Direction () returned ok.
Call to Validating TCP direction () returned ok.
Call to Reading Enable () returned ok.
Call to Getting the name for the predefined port mapping for RWW ()
returned ok.
Call to Creating tcp port mapping protocol () returned ok.
Creating access rule SBS RWW Inbound Access Rule TCP 4125 returned 0
Call to CStingrayCommit::CreatePortMappingsFromXML () returned ok.
Call to Creating custom port mappings () returned ok.
Call to CStingrayCommit::CommitPortMappings () returned ok.
Call to Creating port mappings () returned ok.
CStingrayCommit::CommitWebPublishingRules
Call to Removing all sbs web publishing rules () returned ok.
RUP is not published
Call to Fixing the inheritance for default web site () returned ok.
Call to Unpublishing the default web site () returned ok.
Call to Fixing the inheritance for companyweb dir () returned ok.
Call to Unpublishing companyweb () returned ok.
Call to Publishing /Exchange () returned ok.
Call to Publishing /ExchWeb () returned ok.
Call to Publishing /Public () returned ok.
Call to Publishing /ExAdmin () returned ok.
CStingrayCommit::CreateWebPublishingRules
Call to Reading publishing server name () returned ok.
Call to Creating A record for publishing () returned ok.
Call to Checking the existence of the SBS listener () returned ok.
CStringrayCommit::GetSBSCertHash
Call to Getting the web listener SSL port () returned ok.
SSL Port: 443
Call to Getting the listener cert hash () returned ok.
Call to CStringrayCommit::GetSBSCertHash () returned ok.
Call to Reading the cert hash out of the listener () returned ok.
Call to Reading the Internet Server Name () returned ok.
Internet Server Name: mail.flocktex.com
Call to Recreating the SBS web listener () returned ok.
Call to Publishing OWA () returned ok.
Call to CStingrayCommit::CreateWebPublishingRules () returned ok.
Call to Creating ISA2k4 Web publishing rules () returned ok.
Call to Notify RUP for OWA () returned ok.
Call to Notify RUP for Monitoring () returned ok.
Call to Notify RUP for RPC () returned ok.
Call to Notify RUP for Companyweb () returned ok.
Error 0x80070003 returned from call to Restricting exhchangeoma to
local server only().
Call to Restricting ConnectComputer to local network only () returned
ok.
Call to Setting PassOPTIONSToPublishedServer () returned ok.
Call to GetInternetServerName () returned ok.
Call to NotifyProvisioning () returned ok.
Call to Limiting number of connections () returned ok.
Call to Sending RUP intro mail () returned ok.
Call to Saving web publishing selection () returned ok.
Call to CStingrayCommit::CommitWebPublishingRules () returned ok.
Call to Creating Web publishing rules () returned ok.
CStingrayCommit::FixAccessRuleOrders
Call to Fixing the LAN access rule order () returned ok.
Call to Fixing the Windows update Access rule order () returned ok.
Call to Fixing the Internet Access rule order () returned ok.
Call to CStingrayCommit::FixAccessRuleOrders () returned ok.
Call to Fixing the access rule order () returned ok.
Call to Saving ISA2k4 changes () returned ok.
Call to Saving the last firewall selection () returned ok.
Call to CStingrayCommit::CommitEx () returned ok.
Calling CCertCommit::CommitEx
Calling CCertCommit::ValidatePropertyBag
Require SSL for OWA: 1
Require SSL for Remote Portal: 1
Require SSL for Monitoring: 0
Require SSL for OMA: 0
Require SSL for CompanyWeb: 0
Require 128 Bit Encryption: 1
Cert selection: -1
CCertCommit::ValidatePropertyBag returned OK
Opening the cert store returned OK
Reading the computer name returned OK
Reading the fully qualified server name returned OK
Reading web publishing selection returned OK
Reading Sharepoint publishing value returned OK
Sharepoint publishing: 0
Initializing ISA2k4 Library returned OK
*** Removing sharepoint publishing rule returned ERROR 80070002
Rule not found, ignorning error and continuing.
Removing Sbs CompanyWeb Listener returned OK
Saving changes and restarting services returned OK
Publishing CompanyWeb through ISA2k4 returned OK
CCertCommit::EnableSSL returned OK
CCertCommit::RequireSSL returned OK
CCertCommit::NotifyRemoteUserPortal returned OK
Reading the Internet Server Name returned OK
OMA is not published, will not update the server name
Sending RUP intro mail returned OK
CCertCommit::SaveUserSelections returned OK
CCertCommit::CommitEx returned OK
calling CEmailCommit::Commit (0x3819680).
calling CEmailCommit::ValidatePropertyBag ().
calling pdispPPPBag->QueryInterface (IPropertyPagePropertyBag,
0x6e488).
Call to pdispPPPBag->QueryInterface () returned ok.
calling ReadInt4 (0x259850, DB5E5E45-3598-4F1D-8FF7-0ED35B9EB6A4).
Call to ReadInt4 () returned ok.
The out param of ReadInt4() is 1.
calling CValidatePropertyUtil.ValidatePropertyInteger ().
Call to CValidatePropertyUtil.ValidatePropertyInteger () returned ok.
calling ReadBool (0x259850, F71526DD-9C19-4fe9-B7DB-FD4360909275).
Call to ReadBool () returned ok.
The out param of ReadBool() is 1.
calling CValidatePropertyUtil.ValidatePropertyBool ().
Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
calling ReadBool (0x259850, DB5E5E46-3598-4F1D-8FF7-0ED35B9EB6A4).
Call to ReadBool () returned ok.
The out param of ReadBool() is 0.
calling CValidatePropertyUtil.ValidatePropertyBool ().
Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
calling ReadBool (0x259850, 1DB7A50F-98F8-452f-868B-1AAC56585DD0).
Call to ReadBool () returned ok.
The out param of ReadBool() is 1.
calling CValidatePropertyUtil.ValidatePropertyBool ().
Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
calling ReadInt4 (0x259850, C9D8697B-0D4C-4767-8F1F-4CE415098774).
Call to ReadInt4 () returned ok.
The out param of ReadInt4() is 0x2.
calling CValidatePropertyUtil.ValidatePropertyLong ().
Call to CValidatePropertyUtil.ValidatePropertyLong () returned ok.
calling ReadString (0x259850, 01637C90-B142-41C4-8520-6B2E0F891BE7).
Call to ReadString () returned ok.
The out param of ReadString() is flocktex.com.
calling ReadBool (0x259850, 1DB7A50F-98F8-452f-868B-1AAC56585DD0).
Call to ReadBool () returned ok.
The out param of ReadBool() is 1.
calling ReadInt4 (0x259850, C9D8697B-0D4C-4767-8F1F-4CE415098774).
Call to ReadInt4 () returned ok.
The out param of ReadInt4() is 0x2.
calling CValidatePropertyUtil.ValidatePropertyHostName ().
Call to CValidatePropertyUtil.ValidatePropertyHostName () returned ok.
calling AttachCommiter.Validate(pPPPBag) (0x259850,
01637C90-B142-41C4-8520-6B2E0F891BE7).
calling CAttachCommiter::Validate (0x259850).
calling CAttachCommiter::Validate:ReadVariant (0x0).
calling CAttachCommiter::Validate:m_spDoc.CoCreateInstance (0x0).
calling CAttachCommiter::Validate:m_spDoc->loadXML (0x0).
Call to CAttachCommiter::Validate () returned ok.
Call to CEMailCommit::ValidatePropertyBag () returned ok.
calling pdispPPPBag->QueryInterface (IPropertyPagePropertyBag,
0x6e4f4).
Call to pdispPPPBag->QueryInterface () returned ok.
calling ReadInt4 (0x259850, DB5E5E45-3598-4F1D-8FF7-0ED35B9EB6A4).
Call to ReadInt4 () returned ok.
The out param of ReadInt4() is 1.
calling GetDomainAndControllerNames ().
Call to GetDomainAndControllerNames () returned ok.
calling GetOrganizationName (\\ftsbs2000.flocktex.local,
DC=flocktex,DC=local).
Call to GetOrganizationName () returned ok.
calling GetFirstAdministrativeGroup (\\ftsbs2000.flocktex.local,
DC=flocktex,DC=local, First Organization).
Call to GetFirstAdministrativeGroup () returned ok.
calling GetFirstRoutingGroup (\\ftsbs2000.flocktex.local,
DC=flocktex,DC=local, First Organization, First Administrative Group).
Call to GetFirstRoutingGroup () returned ok.
Call to SetCookieAuthentication () returned ok.
Call to Enabling Wireless admin for OMA () returned ok.
Call to Setting SMTPSVC to start up automatically () returned ok.
calling CAttachCommiter::Commit (0x259850).
calling CAttachCommiter::Commit:ReadVariant(GUID_ATTACH_CONFIG) (0x0).
calling CAttachCommiter::Commit:m_spDoc.CoCreateInstance (0x0).
calling CAttachCommiter::Commit:m_spDoc->loadXML (0x0).
calling CAttachCommiter::Commit:WriteConfigFile (0x0).
calling CAttachCommiter::WriteConfigFile (0x40000003).
calling CAttachCommiter::WriteConfigFile:_GetSBSInstallDir (0x0).
calling CAttachCommiter::WriteConfigFile:m_spDoc->save (0x0).
Call to CAttachCommiter::WriteConfigFile () returned ok.
calling CAttachCommiter::Commit:ShouldEnableSink (0x0).
calling CAttachCommiter::ShouldEnableSink (0x40000003).
calling CAttachCommiter::ShouldEnableSink:m_spDoc->selectSingleNode
(0x40000003).
calling CAttachCommiter::ShouldEnableSink:spEnabledNode->get_text
(0x40000003).
calling CAttachCommiter::ShouldEnableSink:m_spDoc->selectNodes
(0x40000003).
calling
CAttachCommiter::ShouldEnableSink:pUnsafeAttachsNodeList->get_length
(0x40000003).
Call to CAttachCommiter::ShouldEnableSink () returned ok.
calling
CAttachCommiter::Commit:pSink.CoCreateInstance(SecAttsEventSink)
(0x0).
calling CAttachCommiter::Commit:pSink->Register (0x0).
Call to CAttachCommiter::Commit () returned ok.
calling EnableSMTPConnector (0x259850, \\ftsbs2000.flocktex.local,
DC=flocktex,DC=local, First Organization).
calling DoRecipientPolicy (0x259850).
calling ReadString (0x259850, 01637C90-B142-41C4-8520-6B2E0F891BE7).
Call to ReadString () returned ok.
The out param of ReadString() is flocktex.com.
calling FinalValidateHostName (flocktex.com).
Call to FinalValidateHostName () returned ok.
calling GetDefaultPolicy (0x6e360).
Call to GetDefaultPolicy () returned ok.
calling GetPostmasterProxyAddresses ().
Call to GetPostMasterProxyAddresses () returned ok.
calling UpdatePostmasterAddress (0x4588ee0, flocktex.com).
Call to UpdatePostmasterAddress () returned ok.
calling ResetRUS ().
calling spADs->SetInfo() ().
Call to spADs->SetInfo () returned ok.
Ignoring return value from call to spADs->SetInfo().
calling spADs->SetInfo() ().
Call to spADs->SetInfo () returned ok.
Ignoring return value from call to spADs->SetInfo().
Call to ResetRUS () returned ok.
calling SetDefaultPolicy (flocktex.com).
calling SetDefaultSMTPRecipient (0x458dce0, flocktex.com).
calling GetDefaultRecipientArray (0x458dce0, 0x6e2ec).
Call to GetDefaultRecipientArray () returned ok.
calling SafeArrayGetLBound (0x403e600, 1, 0x6e2e4).
The out param of SafeArrayGetLBound() is 0.
calling SafeArrayGetUBound (0x403e600, 1, 0x6e2e0).
The out param of SafeArrayGetUBound() is 4.
calling SafeArrayGetElement (0x403e600, 0, 0x6e29c).
The out param of SafeArrayGetElement() is smtp:@luxtx.com.
calling UpdateRUS (smtp:@luxtx.com).
Call to UpdateRUS () returned ok.
calling SafeArrayPutElement (0x403e600, 0, smtp:@luxtx.com).
Call to SafeArrayPutElement () returned ok.
calling SafeArrayGetElement (0x403e600, 1, 0x6e29c).
The out param of SafeArrayGetElement() is smtp:@coverluxe.com.
calling UpdateRUS (smtp:@coverluxe.com).
Call to UpdateRUS () returned ok.
calling SafeArrayPutElement (0x403e600, 1, smtp:@coverluxe.com).
Call to SafeArrayPutElement () returned ok.
calling SafeArrayGetElement (0x403e600, 2, 0x6e29c).
The out param of SafeArrayGetElement() is smtp:@flocktex.local.
calling UpdateRUS (smtp:@flocktex.local).
Call to UpdateRUS () returned ok.
calling SafeArrayPutElement (0x403e600, 2, smtp:@flocktex.local).
Call to SafeArrayPutElement () returned ok.
calling SafeArrayGetElement (0x403e600, 3, 0x6e29c).
The out param of SafeArrayGetElement() is SMTP:@flocktex.com.
calling UpdateRUS (SMTP:@flocktex.com).
Call to UpdateRUS () returned ok.
calling SafeArrayPutElement (0x403e600, 3, SMTP:@flocktex.com).
Call to SafeArrayPutElement () returned ok.
calling SafeArrayGetElement (0x403e600, 4, 0x6e29c).
The out param of SafeArrayGetElement() is X400:c=US;a= ;p=First
Organizati;o=Exchange;.
calling SafeArrayCopy (0x403e600).
Call to SafeArrayCopy () returned ok.
calling LogSet_gatewayProxy ().
Element: smtp:@luxtx.com.
Element: smtp:@coverluxe.com.
Element: smtp:@flocktex.local.
Element: SMTP:@flocktex.com.
Element: X400:c=US;a= ;p=First Organizati;o=Exchange;.
Call to LogSet_gatewayProxy () returned ok.
calling pADs->SetInfo ().
Call to pADs->SetInfo () returned ok.
calling SafeArrayDestroy (0x403e600).
Ignoring return value from call to SafeArrayDestroy().
Call to SetDefaultSMTPRecipient () returned ok.
Call to SetDefaultPolicy () returned ok.
calling KickRUS ().
calling spADs->SetInfo() ().
Call to spADs->SetInfo () returned ok.
Ignoring return value from call to spADs->SetInfo().
calling spADs->SetInfo() ().
Call to spADs->SetInfo () returned ok.
Ignoring return value from call to spADs->SetInfo().
Call to KickRUS () returned ok.
Call to DoRecipientPolicy () returned ok.
calling DoSmtpRelayIp ().
Call to DoSmtpRelayIp () returned ok.
calling ADsGetObject (LDAP://ftsbs2000.flocktex.local/CN=SmallBusiness
SMTP connector,CN=Connections,CN=First Routing Group,CN=Routing
Groups,CN=First Administrative Group,CN=Administrative Groups,CN=First
Organization,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=flocktex,DC=local, IADs,
0x6e3cc).
Call to ADsGetObject () returned ok.
calling spADs->SetInfo ().
Call to spADs->SetInfo () returned ok.
calling spADs->SetInfo ().
Call to spADs->SetInfo () returned ok.
calling _RestartService (RESvc, 1).
Call to _RestartService () returned ok.
calling _RestartService (SMTPSvc, 1).
Call to _RestartService () returned ok.
Call to EnableSMTPConnector () returned ok.
Error 0x80070003 returned from call to CEMailCommit::Commit().
calling GetBOConnector ().
Call to GetBOConnector () returned ok.
calling spADs->PutEx (ADS_PROPERTY_CLEAR,
msExchSmtpOutboundSecurityPassword).
Call to spADs->PutEx () returned ok.
calling spADs->SetInfo ().
Call to spADs->SetInfo () returned ok.

"Merv Porter [SBS-MVP]" <mwport@xxxxxxxxxxxxxxxxxxx> wrote in message
news:eSWNz7USGHA.5736@xxxxxxxxxxxxxxxxxxxxxxx
C:\Program Files\Microsoft Windows Small Business
Server\Support\icwlog.txt

You might want to first delete or rename icwlog.txt. (This will
allow a
fresh copy of the file to be created when you run CEICW). Then
re-run CEICW
and post the resultant icwlog.txt file for us to look at.

--
Merv Porter [SBS MVP]
===================================

"MS Newsgroups" <jmurphy@xxxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:u8XkdsUSGHA.5108@xxxxxxxxxxxxxxxxxxxxxxx
new install of sbs2003 premium. Event viewer is as perfect, no
errors. It gets about 3/4 the way through the e-mail config and
fails. Everything is working on the server without issues. What the
heck could be causing this. I have looked at all the postings here
and nothing seems to apply.

Please advise.















.

Relevant Pages

  • Re: RWW, ICW problem
    ... Call to Reading hardware selection returned ok. ... calling CNetCommit::ValidateFulltimeConnectionProperties. ... Call to Reading the firewall selection returned ok. ... Call to Notifying client setup for Default gateway as the SBS server returned ok. ...
    (microsoft.public.windows.server.sbs)
  • Re: RWW, ICW problem
    ... Call to Reading hardware selection returned ok. ... calling CNetCommit::ValidateFulltimeConnectionProperties. ... Call to Reading the firewall selection returned ok. ... Call to Notifying client setup for Default gateway as the SBS server ...
    (microsoft.public.windows.server.sbs)
  • RWW, ICW problem
    ... SBS 2000 Premium. ... Call to Reading hardware selection returned ok. ... calling CNetCommit::ValidateFulltimeConnectionProperties. ... Call to Reading the firewall selection returned ok. ...
    (microsoft.public.windows.server.sbs)
  • ICW Error
    ... Call to Reading the firewall selection returned ok. ... Loading port mapping XML ... Calling CCertCommit::ValidatePropertyBag ...
    (microsoft.public.windows.server.sbs)
  • ICW Error
    ... Call to Reading the firewall selection returned ok. ... Loading port mapping XML ... Calling CCertCommit::ValidatePropertyBag ...
    (microsoft.public.windows.server.sbs)
Loading