Re: Cannot get access to router on SBS server

Hi Warren,

Please post an ipconfig /all for the server.

--
Merv Porter [SBS MVP]
===================================

"Warren Machanik" <WarrenMachanik@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message news:76CEF7C5-A941-4DF3-A4D9-7739C6A0CF0B@xxxxxxxxxxxxxxxx
I recently upgraded from a dialout device to a router (a generic DSL type).
I
reset up everything and email and surfin work, but I cannot get into the
server from outside. I assumed this was to do with the router I tried to
access it again (I have 2 network cards 1 - LAN and 2 - Internet and I
cannot
get to the IP. I have tried pinging it nothing, if I tracert I see the
traffic go trough the IP.

When I tried getting access to the local firewall settings I get told
another device "IPNAT" is using it. How do I access this router?

--
Warren - All limits are man made


.

Relevant Pages

  • Re: DHCP not working?
    ... Can Paul ping the router? ... When you say you reset the router, do you mean just turned off and on or did ... > from the DHCP server in order to access the network. ... > The setup is an Actiontec DSL Modem, attached to a Linksys ...
    (microsoft.public.win2000.networking)
  • Re: Wrong IPs
    ... I have reset the ... router, but to no avail. ... > say you get the same result from the server, ... >> but when I try to ping any workstation, the come up with the same IP ...
    (microsoft.public.backoffice.smallbiz2000)
  • Funny exchange behavior
    ... I had the following behavior from my sbs server ... internet neither from the clients nor from the server. ... I decided to reset the router, and presto all the problems were gone. ...
    (microsoft.public.backoffice.smallbiz2000)
  • Re: one or two NIC cards
    ... Internet access (which comes back after router is reset.) If I use my ... server as the router, then I'll have to restart the server which would ...
    (microsoft.public.windows.server.sbs)
  • Re: SBS 2003 Misconfigured?
    ... I've thrown quite a bit at them, and just have to disagree that they are inherently less secure than the netgear. ... setup DHCP and I have also gone in and manually created a new scope ... when I first used the Netgear router with SBS 2003, ... than one SBS server in a company makes no sense. ...
    (microsoft.public.windows.server.sbs)
Loading