RE: Sending mail via RPC over HTTP

Hi Robert,

Thanks for your update. I am glad to know that things are getting fine now.
I appreciate your time and effort to the issue and get this resolved. Also
thank you for sharing with us how you solved the issue! I believe it will
benefits many customers! Please do not hesitate to post in this newsgroup
if you need any assistance in the future!

We are glad to help.

Have a nice day!

Sincerely,

Jenny Wu
Microsoft CSS Online Newsgroup Support
Get Secure! - www.microsoft.com/security
======================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.
======================================================
This posting is provided "AS IS" with no warranties, and confers no rights.
The customer mail content:
========================
Jenny:

Thanks for following up. I was able to fix my issues (at least the ones
I controlled) by installing a third party product called Mobile Net
Switch. The issue turned out to be that my hosts file was calling out
the wrong IP addresses and nothing was getting through to the proper IP
address listed at my ISP provider. My laptop was configured to use
non-public IP addresses as I connect using a wireless setup "inside" my
DSL router, but "outside" my ISA 2004 Server sitting on the SBS 2003
Server [sort of like a wireless DMZ].

As I started through your "fix" outlined below, it dawned on me the
hosts file was not configured correctly. As I already had the Mobile
Net Switch license not doing anything I used that to be able to
configure profiles at each location I visit. Thank you again for your
very complete post. I have used this workgroup in the past to answer a
lot of my questions regarding SBS 2003. Now if only the VPN [Cisco 3002
Virtual VPN that allows "external access" through a corporate firewall"]
I am using at the location I am working at would allow me to connect to
https based sites and "write" permissions to my own ftp site, my
problems would be solved.


Robert A Dye
Integrated Master Solutions
(480) 570-6799 Mobile
r.dye@xxxxxxxxxx
========================

--------------------
X-Tomcat-ID: 59463440
References: <#wTaCNTPGHA.536@xxxxxxxxxxxxxxxxxxxx>
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
From: v-yanniw@xxxxxxxxxxxxxxxxxxxx ("Jenny wu [MSFT]")
Organization: Microsoft
Date: Thu, 02 Mar 2006 03:15:58 GMT
Subject: RE: Sending mail via RPC over HTTP
X-Tomcat-NG: microsoft.public.windows.server.sbs
Message-ID: <k#i5jeaPGHA.1388@xxxxxxxxxxxxxxxxxxxxx>
Newsgroups: microsoft.public.windows.server.sbs
Lines: 219
Path: TK2MSFTNGXA03.phx.gbl
Xref: TK2MSFTNGXA03.phx.gbl microsoft.public.windows.server.sbs:248627
NNTP-Posting-Host: tomcatimport2.phx.gbl 10.201.218.182

Hi Robert,

Thanks for using the SBS newsgroup.

From your description, I understand that you have encountered some issues:

1. You can not send email to the Exchange server via RPC over http.
2. From OWA, you can not saw the Contact list and send email to it.
3. You can not access the RWW site properly.

If I am off base, please don't hesitate to let me know.

Since Microsoft engineers can only focus on one issue per thread, let us
first focus on the RPC over http issue so that we can resolve issues
efficiently one by one. We recommend you post different incidents in
different threads to keep the thread clean. In doing so, it will ensure
your issues are resolved in a timely manner. Thanks for your understanding.

Before we go further to trouble shoot the RPC over http issue, please
kindly help me collect some information to isolate the issue:

1. What is your meaning of "can not send mail from the outlook client to
the server"? What is the exact error message you received when trying to
send email?
2. Where these affected emails stay? Do they show in Outbox folder, Sent
items box or others?
3. Can you send emails to external email addresses? Can you send emails to
the domain users?

I would like to suggest that you follow below steps to re-configure the
RPC
over HTTPs:

I. When you run CEICW (server management console -> Configure E-mail and
Internet configuration wizard -> Connect to the internet), you need enable
firewall and then the Services Configuration page and the Web Services
Configuration page will appear later. In these pages, you can configure
firewall to open related ports to allow specific traffic transfer and
publish some web services to internet. Additionally, if your hardware
router supports UPnP, this wizard will automatically help you open related
ports.

I would like to list the steps for your reference:

1. Expand Standard Management | To Do List.
2. Click Connect to the Internet in the right pane.
3. Navigate the wizard to Firewall and then select Enable firewall. In the
next page, make sure the E-mail item is checked in services configuration
page.
4. Click Next and then select Allow access to the following web site
services from the internet.
5. Make sure Outlook via the internet, Remote Web Workspace items are
selected and select any additional services, such as Outlook Web Access,
that you require. click Next.
6. On the Web Server Certificate page, select the Web server certificate
type, and then click Next. You can choose to either install a new Web
server certificate or locate a third-party certificate.
7. The wizard automatically configures Exchange, IIS, and the RPC proxy
registry entries.

I suggest you refer to KB 825763 to get more information about configure
SBS network connection:

825763 How to configure Internet access in Windows Small Business Server
2003
http://support.microsoft.com/?id=825763

And then domain users login their workstations, open the RWW site
(https://FQDN/remote) and Click the link for Outlook via Internet on the
right of the RWW homepage. Follow the instructions to configure the
Outlook
client.

II. On the Outlook client, make sure it is Windows XP SP1 with the hotifx
331320 installed (or a later service pack).

Please refer to following KB article:
331320 Outlook 2003 Performs Slowly or Stops Responding When Connected to
http://support.microsoft.com/?id=331320

For more system requirement, please refer to the link:
http://www.microsoft.com/office/ork/2003/three/ch8/OutC07.htm

III. Only the ports 80 and 443 are necessary, if you use RPC over HTTPS,
which is Microsoft recommended. You need to open these ports on all
routers
and firewalls.

IV. Please confirm that the certificate used by HTTPS is using his
external
FQDN of SBS Server instead of internal FQDN.

I suggest you read the following online article carefully to verify if the
RPC over HTTPs is set up correctly on your Exchange 2003 Server and the
required ports are opened on the firewall of your network.

http://www.winnetmag.com/Article/ArticleID/39770/39770.html

NOTE: This response contains a reference to a third party World Wide Web
site. Microsoft is providing this information as a convenience to you.
Microsoft does not control these sites and has not tested any software or
information found on these sites; therefore, Microsoft cannot make any
representations regarding the quality, safety, or suitability of any
software or information found there. There are inherent dangers in the use
of any software found on the Internet, and Microsoft cautions you to make
sure that you completely understand the risk before retrieving any
software
from the Internet.

More info about Exchange 2003 in sbs 2003:

How to configure connection filtering to use Realtime Block Lists (RBLs)
and how to configure recipient filtering in Exchange 2003
http://support.microsoft.com/?id=823866

Note: there are some different process to configure RPC over HTTPs in SBS
environment, the KB 833401 article does apply to this scenario.
How to configure RPC over HTTP on a single server in Exchange Server 2003
http://support.microsoft.com/?id=833401

And then please try to test the issue to see if it is resolved.

Hope the above information helps. I am happy to be assistance of you and
look forward to your reply.

Have a nice day!

Sincerely,

Jenny Wu
Microsoft CSS Online Newsgroup Support
Get Secure! - www.microsoft.com/security
======================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check
the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In
doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.
======================================================
This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------
From: "Robert Dye" <r.dye@xxxxxxxxxx>
Subject: Sending mail via RPC over HTTP
Date: Tue, 28 Feb 2006 15:45:41 -0700
Lines: 28
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2900.2670
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2670
X-RFC2646: Format=Flowed; Original
X-Antivirus: avast! (VPS 0609-1, 03/01/2006), Outbound message
X-Antivirus-Status: Clean
Message-ID: <#wTaCNTPGHA.536@xxxxxxxxxxxxxxxxxxxx>
Newsgroups: microsoft.public.windows.server.sbs
NNTP-Posting-Host: 63.230.219.40
Path: TK2MSFTNGXA03.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP09.phx.gbl
Xref: TK2MSFTNGXA03.phx.gbl microsoft.public.windows.server.sbs:248411
X-Tomcat-NG: microsoft.public.windows.server.sbs

Hello:

I have an SBS2003 sp1 premium configuration. Currently, I am working at
a
corporate site that requires going through a Cisco 3002 VPN to get
external
access. I have been told the permissions allow for "any" ports, etc
through
this portal.

What I am experiencing is as follows:

my laptop Outlook client is setup to run rpc over http. I can log onto
the
exchange server and "receive" email from the server. I cannot "send"
mail
from the outlook client to the server.

Additionally, I can log onto the OWA [server.domain.com/exchange] and
"browse" the OWA interface to view and download mail, but cannot access
my
contact list nor "send" mail to it.

I cannot log onto [server.domain.com/remote], I get to the logon screen
ok,
but can't get it to authenticate.

Any hints as to what may be wrong? is it a non public certificate (
using
the sbs2003 generated stuff)?

Any help would be appreciated. Thanks in advance!

Robert Dye






.

Relevant Pages

  • RE: Outlook RPC over HTTp deosnt work
    ... try to use RPC over HTTP to connect the Exchange Server. ... What SBS is running on the problematic Server? ...
    (microsoft.public.windows.server.sbs)
  • RE: Post SP1, ESP2 - Outlook over HTTP not working
    ... ISA Server 2004/Exchange Server Deployment Kit ... 833401 How to configure RPC over HTTP on a single server in Exchange Server ... restart IIS Admin Service and Microsoft ISA ...
    (microsoft.public.windows.server.sbs)
  • Re: RPC over HTTP Question
    ... allow specific traffic transfer and publish some web services to internet. ... On the Web Server Certificate page, ... The wizard automatically configures Exchange, IIS, and the RPC proxy ... >Subject: Re: RPC over HTTP Question ...
    (microsoft.public.windows.server.sbs)
  • RE: RPC over HTTP
    ... NTLM and Basic Authentication for RPC over HTTP: ... TCP port to connect Exchange server by Outlook, it is easy to go through ...
    (microsoft.public.windows.server.sbs)
  • RE: Connection Settings for RPC over HTTP
    ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ... Connection Settings for RPC over HTTP ...
    (microsoft.public.exchange.admin)