Re: Problems with network printer

What network port type did you setup? Should be a standard TCP/IP port but LPR and other types can be used with many Xerox printers.

When you manage it does it say what port type connection it is enabled for? e.g. the Xerox 8550 has about 6 options in the network port setup properties.



VPtravel wrote:
We have a Xerox 860 with a static IP. It was on an USP port but we
decided to move it to the network. We assigned a static IP
(10.10.10.45) and installed it on a standard IP port.

The print is visible but doesn't print... we get print fail message.
I can ping it, I can manage it with http://10.10.10.45 or by it's name
http://xerox

I'm sure I missed something somewhere

Thank you for any ideas and sugestions

.

Relevant Pages

  • Re: DOS capture to Jetdirect printer
    ... > network port that was listed the printer port config window. ...
    (microsoft.public.windowsxp.print_fax)
  • Re: HP 3600 is the same as an 3600n
    ... I've found a Network port (under ... a white sticker) just where the CLJ 3600n should have its port. ... 8139 chip on the printers mainboard. ...
    (comp.periphs.printers)
  • Re: MP Solved WAS EFI Console
    ... Putty works really well over the MP network port. ...  Publication of _this_ usenet article outside ... Both of which are flexible enough to handle connecting and ...
    (comp.os.vms)
  • Re: SMTP Port 25 blocked
    ... Is there a way to check if the internal firewall of SBS has disabled or blocked port 25. ... Can the router keep logs? ... network port. ...
    (microsoft.public.windows.server.sbs)
  • Re: best firewall???
    ... Port Blocking rules are not required. ... Protocol: TCP and UDP ... Local App.: Any ... Port type: Port/Range ...
    (comp.security.firewalls)