Re: Win2k VPN Client doees work. Winxp Client does?

OK, I have put both the client and the server on the same network as the
external interface. No routers in between. The XP client connects and the so
does hte Win2k Client. As soon as I put them through a router it does not
work for the win2k client. I still don't understand what the differences are
in the win2k client and the XP.

""Crina Li"" <v-crinal@xxxxxxxxxxxxxxxxxxxx> wrote in message
news:1hXHUaRPGHA.4520@xxxxxxxxxxxxxxxxxxxxxxxx
Hi Kevin,

Thanks for your update.

Thanks for your time and efforts on the issue. However I am sorry for that
I can not logon to your server and troubleshoot the issue. You may need to
call CSS to do so.

Due to the complexity of this issue, we are unable to assist with this
request in newsgroup. To save your time, you may need to contact CSS for
better support.

A suggestion would be to contact Microsoft Product Support Services via
telephone so that a dedicated Support Professional can assist with your
request. Please be advised that contacting phone support will be a charged
call. However, if you are simply requesting a hotfix be sent to you and no
other support then charges are usually refunded or waived.

To obtain the phone numbers for specific technology request please take a
look at the web site listed below.

http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS

If you are outside the US please see http://support.microsoft.com for
regional support phone numbers.

Thanks for your understanding!

Best regards,

Crina Li (MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

=====================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check
the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In
doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.

=====================================================

This posting is provided "AS IS" with no warranties, and confers no
rights.
--------------------
| From: "KevCar" <kevinc@xxxxxxxxxxxxxxxxxx(deletethispart)>
| References: <#q9Q5Q#NGHA.3260@xxxxxxxxxxxxxxxxxxxx>
<CakhPtEOGHA.3052@xxxxxxxxxxxxxxxxxxxxx>
| Subject: Re: Win2k VPN Client doees work. Winxp Client does?
| Date: Thu, 23 Feb 2006 08:03:50 -0700
| Lines: 136
| X-Priority: 3
| X-MSMail-Priority: Normal
| X-Newsreader: Microsoft Outlook Express 6.00.2900.2670
| X-RFC2646: Format=Flowed; Original
| X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2670
| Message-ID: <#lf8BpIOGHA.1832@xxxxxxxxxxxxxxxxxxxx>
| Newsgroups: microsoft.public.windows.server.sbs
| NNTP-Posting-Host: 67.139.235.103
| Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP11.phx.gbl
| Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.server.sbs:246859
| X-Tomcat-NG: microsoft.public.windows.server.sbs
|
| Thanks for the reply. The link you gave me for the connection manager
does
| not work. Please check the other posting as I accidently posted twice.
There
| is a better explanation of whats going on in that posting. Thanks for
| replying.
|
| ""Crina Li"" <v-crinal@xxxxxxxxxxxxxxxxxxxx> wrote in message
| news:CakhPtEOGHA.3052@xxxxxxxxxxxxxxxxxxxxxxxx
| > Hi Kevin,
| >
| > Thank you for posting in SBS newsgroup.
| >
| > From the description, I understand the issue to be: you can not create
VPN
| > from Windows 2000 to SBS. If I have misunderstood your concerns,
please
do
| > not hesitate to let me know.
| >
| > To narrow down the problem, would you please help me collect the
following
| > information?
| >
| > 1. Do you mean you are using the Create a new connection wizard to
create
| > VPN to SBS?
| > 2. What is the detailed error message when you create the VPN to SBS?
| > 3. Are you using SBS Standard or Premium? Do you have ISA installed on
| > SBS?
| > 4. Does the situation occur when you create VPN from Windows 2000
using
| > the
| > same account with the Windows XP?
| > 5. Does the XP client connect to SBS using VPN when you create VPN to
SBS
| > from Windows 2000?
| > 6. Please use the Connection Manager to create VPN to SBS from Windows
| > 2000, does the situation occur?
| >
| > Also, I provide some general steps below to configure VPN access on an
SBS
| > environment?
| >
| > 1. Run CEICW, follow the wizard and select Enable firewall and then
make
| > sure Virtual Private Networking (VPN) is selected in the Services
| > Configuration page. And make sure you have typed the public FQDN of
the
| > SBS
| > server on the Web Server Certificate page.
| > 2. Run Remote Access Wizard in Server Management\Internet and
| > E-mail\Configure Remote Access, and select VPN access in the Remote
Access
| > Method page. After finishing this wizard, RRAS is configured to allow
| > inbound VPN access, and it can assign IP addresses to the VPN clients
by
| > using DHCP.
| >
| > Note: When we run the remote access wizard to set up the VPN service,
we
| > need to input the public IP address or the public FQDN of the SBS
server.
| > We need to make sure that the address can be accessed from the
internet.
| >
| > 3. On the VPN client, go to https://publicFQDN/remote, clear I'm using
a
| > public or shared computer, log in and download Connection Manager.
| > 4. Install Connection Manager on the VPN client.
| > 5. Is there a hardware router installed in front of the SBS server? If
so,
| > ensure that the port forwarding for TCP 1723 and GRE port (protocol
number
| > 47) are opened. PPTP VPN is negotiating a connection on TCP port 1723
and
| > send data to and from the PPTP server using the GRE protocol (IP
Protocol
| > 47, 0x2F if you are looking in Network Monitor). You should open port
1723
| > on the router and also make sure IP Protocol 47 is allowed.
| >
| > Regarding information:
| >
| > 323441 How To Install and Configure a Virtual Private Network Server
in
| > Windows
| > http://support.microsoft.com/?id=323441
| >
| > 305550 How to configure a VPN connection to your corporate network in
| > Windows
| > http://support.microsoft.com/?id=305550
| >
| > I appreciate your time and look forward to hearing form you.
| >
| > Best regards,
| >
| > Crina Li (MSFT)
| >
| > Microsoft CSS Online Newsgroup Support
| >
| > Get Secure! - www.microsoft.com/security
| >
| > =====================================================
| > This newsgroup only focuses on SBS technical issues. If you have
issues
| > regarding other Microsoft products, you'd better post in the
corresponding
| > newsgroups so that they can be resolved in an efficient and timely
manner.
| > You can locate the newsgroup here:
| > http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
| >
| > When opening a new thread via the web interface, we recommend you
check
| > the
| > "Notify me of replies" box to receive e-mail notifications when there
are
| > any updates in your thread. When responding to posts via your
newsreader,
| > please "Reply to Group" so that others may learn and benefit from your
| > issue.
| >
| > Microsoft engineers can only focus on one issue per thread. Although
we
| > provide other information for your reference, we recommend you post
| > different incidents in different threads to keep the thread clean. In
| > doing
| > so, it will ensure your issues are resolved in a timely manner.
| >
| > For urgent issues, you may want to contact Microsoft CSS directly.
Please
| > check http://support.microsoft.com for regional support phone numbers.
| >
| > Any input or comments in this thread are highly appreciated.
| >
| > =====================================================
| >
| > This posting is provided "AS IS" with no warranties, and confers no
| > rights.
| > --------------------
| > | From: "KevCar" <kevinc@xxxxxxxxxxxxxxxxxx(deletethispart)>
| > | Subject: Win2k VPN Client doees work. Winxp Client does?
| > | Date: Wed, 22 Feb 2006 11:58:26 -0700
| > | Lines: 6
| > | X-Priority: 3
| > | X-MSMail-Priority: Normal
| > | X-Newsreader: Microsoft Outlook Express 6.00.2900.2670
| > | X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2670
| > | X-RFC2646: Format=Flowed; Original
| > | Message-ID: <#q9Q5Q#NGHA.3260@xxxxxxxxxxxxxxxxxxxx>
| > | Newsgroups: microsoft.public.windows.server.sbs
| > | NNTP-Posting-Host: 67.139.235.103
| > | Path:
TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP11.phx.gbl
| > | Xref: TK2MSFTNGXA01.phx.gbl
microsoft.public.windows.server.sbs:246558
| > | X-Tomcat-NG: microsoft.public.windows.server.sbs
| > |
| > | I have a SBS server 2003. I am able to make a VPN Connection to it
using
| > the
| > | built in pptp client in Windows XP. But when I configure a Win2k pro
VPN
| > | Connection with the exact same settings, it stops at verifying
username.
| > | What would cause this?
| > |
| > |
| > |
| >
|
|
|



.

Relevant Pages

  • Re: Serving Pop Mail with SBS
    ... I am still wondering why the clients at branchoffice still need to vpn into ... the SBS to get email/companyweb. ... I thought that if you have the remote server ... 4Mbps Down and 800 Kbps Up) I've noticed that with a client connected ...
    (microsoft.public.windows.server.sbs)
  • Re: VPN no ISA error
    ... You can access Exchange thru VPN, do you mean OWA or Outlook? ... On the SBS Server, ... On the client computers, make sure that the "Computer Browser" service ...
    (microsoft.public.windows.server.sbs)
  • Re: VPN clients unable to connect to other resources.
    ... Dave Nickason [SBS MVP] wrote: ... Too I'm not sure how the Sonicwall isn't involved in the VPN, ... client PCs on the same network. ... VPN server, remote routing and access running on the SBS 2003 ...
    (microsoft.public.windows.server.sbs)
  • RE: Fax monitor incoming + outgoing calls?
    ... problem between the client computer and the SBS server. ... Client is using the internal IP address of the SBS server as the ... To the folder redirection GPO issue: ...
    (microsoft.public.windows.server.sbs)
  • Re: Some Questions
    ... you may need to follow the steps below to configure VPN access ... And make sure you have typed the public FQDN of the SBS ... server on the Web Server Certificate page. ... log in and download Connection Manager. ...
    (microsoft.public.windows.server.sbs)