RE: Companyweb stopped

Tech-Archive recommends: Fix windows errors by optimizing your registry

That worked thankyou Crina

""Crina Li"" wrote:

Hi Keith,

Thank you for posting in SBS newsgroup.

First of all, please make sure that you're going to type a correct command:

stsadm.exe -o upgrade -forceupgrade -url http://companyweb

[Note] Please manually key in the characters. On my test machine, if I
simply copy and paste the command from the KB to the CMD prompt, it will
also come back with a "Command line error" since the "-" has been replaced
with "-".

If the problem persists, please let me know whether the SP1 installation
completed successful.

This issue always happens with a failed WSS update. If the installation
failed, I recommend you to follow the steps below to reinstall WSS
Companyweb. (Please make another backup first.)

1. Please strictly follow KB 829114 for reinstallation of SharePoint
companyweb (with SBS 2003 SP0 CD3 inserted).

829114 How to remove and how to install the Windows Small Business Server
2003 SharePoint Services companyweb Web site
http://support.microsoft.com/default.aspx?scid=kb;EN-US;829114

2. If the system prompts you for SP1 installation CD3, follow these steps:

a) Open Registry Editor and set 'isrunfromweb' to '2', under
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SmallBusinessServer.
b) Download SBS 2003 SP1 (885918) to C:\.
c) Open CMD window and type "C:\SBS2003-KB885918-SP1-X86-ENU.EXE /x" (with
no quotation marks) and press Enter.
d) Specifying a path for the extracted files (such as C:\SBSSP1)
e) Point the system to the folder created in the previous steps
(C:\SBSSP1\CD3).

3. After finish the installation, install KB 832880.
4. Install WSS 2.0 SP1.
5. Install SBS 2003 SP1 (885918) again.
6. Reboot the server and check whether the problem persists.

I hope the above info helps.

If there's any update, please don't hesitate to let me know.

Best regards,

Crina Li (MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

=====================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.

=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
| Thread-Topic: Companyweb stopped
|| From: "=?Utf-8?B?S2VpdGggQg==?=" <KeithB@xxxxxxxxxxxxxxxxxxxxxxxxx>
| Subject: Companyweb stopped
| Date: Tue, 21 Feb 2006 08:20:31 -0800
| | Newsgroups: microsoft.public.windows.server.sbs
||
| Hi, since I ran SP1 my companyweb has stopped I get the following error:
|
| This Windows SharePoint Services virtual server has not been configured
for
| use with ASP.NET 2.0.50727.42. For more information, please refer to
| Knowledge Base article 894903 at
| http://go.microsoft.com/fwlink/?LinkId=42660.
|
| I followed the link and tried to use the solution posted there, however
when
| you run the command it gives an error stating the command is invalid, it
then
| shows a list of valid commands and "upgrade" is not one of the commands
| listed.
| Has anyone else been able to sort the issue out?
| TIA
| Keith
|


.

Relevant Pages

  • RE: Companyweb not available after SP1
    ... To install SBS SP1 properly for a reinstallation of the companyweb, ... If the system prompts you for SP1 installation CD3, ... This newsgroup only focuses on SBS technical issues. ...
    (microsoft.public.windows.server.sbs)
  • RE: Companyweb stopped
    ... I can't beleive I spent more than 2 hours fighting with the command and it ... please let me know whether the SP1 installation ... 2003 SharePoint Services companyweb Web site ... This newsgroup only focuses on SBS technical issues. ...
    (microsoft.public.windows.server.sbs)
  • RE: Companyweb stopped
    ... please make sure that you're going to type a correct command: ... please let me know whether the SP1 installation ... 2003 SharePoint Services companyweb Web site ... This newsgroup only focuses on SBS technical issues. ...
    (microsoft.public.windows.server.sbs)
  • Re: Companyweb help please
    ... it seems that you are likely still in the installation ... This newsgroup covers installing standalone WSS and other standalone WSS ... > point administration and companyweb. ...
    (microsoft.public.sharepoint.windowsservices)
  • Re: Solid Edge or Solid Works on 3D
    ... There is an OPEN newsgroup that does not require a webkey account that is ... This will keep whatever command you're ... > mate relatioship it will be automatically converted to a planar align. ... > - Update Links and Update Relationship commands are in the main toolbar. ...
    (comp.cad.solidworks)