Re: Non-domain connection problem

Liam,

This output looks as though it is from a system connected to the work LAN.
Notice that the default gateway and DNS IP addresses are different, as well
as the fact that there is a WINS server listed.

What is the ipconfig from the system when it is on a home router? A typical
home system would have 192.168.0.1 or 192.168.1.1 as the default gateway and
the DNS server, with no WINS listed.

Gregg Hill


"Liam" <Liam@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:8D9456C0-7981-4894-9E90-0098C9A565AD@xxxxxxxxxxxxxxxx
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\lhawthorne>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : it-test-pc
Primary Dns Suffix . . . . . . . : megastream.local
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : megastream.local


Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : hoth.local
Description . . . . . . . . . . . : via Rhine III Fast ethernet
adapter
Physical Address. . . . . . . . . : o3-E0-18-F1-94-98
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.2.11
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.2.1
DHCP Server . . . . . . . . . . . : 192.168.2.185
DNS Servers . . . . . . . . . . . : 192.168.2.185
Primary WINS Server . . . . . . . : 192.168.2.185
Lease Obtained. . . . . . . . . . : February 14, 2006 12:31:39 PM
Lease Expires . . . . . . . . . . : February 22, 2006 12:31:39 PM

I hard coded the DNS server to a known DNS on the internet: 24.207.7.6
Again this had no effect on the ability to connect to the internet.

Thnkas for your help,

Liam

"Gregg Hill" wrote:

Liam,

After you do the following off the domain and on home router

ipconfig /release SUCCESS!
ipconfig /flushdns SUCCESS!
ipconfig /renew SUCCESS!

please post the output from

ipconfig /all

Gregg Hill



"Liam" <Liam@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:FFB0421E-77AF-410B-91C9-3AE47E9A9306@xxxxxxxxxxxxxxxx
Hi Gregg,

Thanks for the help.
DHCP is "pure". At home it is from the routers at work ir is from the
SBS
box.

There are few fixed IP's (3 servers, 2 routers).

IPconfig /release /renew /flush dbs seem to have no effect on the
connectivity.
NSLOOKUP always looks for the SBS as the default gateway.

The wonder of all of this is that it worked without error for 8 moths.
When
I put the server 2003 box on the network seems to have caused these
problems.

I ran gpedit and all the gpo's are "not configured" which is as it
should
be.

I currently have a laptop here that is off the domain.
ipconfig /release SUCCESS!
ipconfig /flushdns SUCCESS!
ipconfig /renew SUCCESS!

Connect to Internet...fail!

The client software is Symantec VPN (same as our router/gateway) There
are
no settings for "allow remote gateway".
But , again...this worked fine for at least 8 months until the Server
2003
was placed on the network.

?

"Gregg Hill" wrote:

Liam,

Are you using pure DHCP both at work and home (NO fixed address
anywhere)?
Make sure you have no fixed IP addresses for DNS servers. You
**should**
be
able to use a batch file with "ipconfig /release && ipconfig /renew"
in
it
to make it easy for the end users to release/renew the address.

As long as no fixed settings are there, and as long as the user's home
router is configured properly, it should get the correct addressing.

What is the result of taking the laptop off the network, then running
"ipconfig /release" followed by an "ipconfig /all" command? Please
post
your
results here.

Do you have any GPOs forcing IP settings?

Gregg Hill




"Liam" <Liam@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:62108E7B-8810-4660-8D3A-22A0ABDCB622@xxxxxxxxxxxxxxxx
Crina Li,

Thank you so much for replying and attempting to help me solve my
challenge.

I have done everything you have asked and still remote clients
cannot
find
a
dns server other than the Primary Domain Controller on the domain.

I am sure that I need to find a way to "change the default gateway
on
the
remote PC"
Since the default gateway is ALWAYS the domain controller of the SBS
domain!
From home this is a real problem.


""Crina Li"" wrote:

Hi Liam,

Thank you for posting in SBS newsgroup.

From the description, I understand the issue to be: you want to let
the
laptop can surf internet from home without going through SBS. If I
have
misunderstood your concerns, please do not hesitate to let me know.

As I know, when a laptop which is set to obtain an IP address
automatically
connects to your network, it should contact the SBS server for an
IP
address (including DNS and other settings) and then it can browse
the
internal network and Internet web sites. When the laptop
disconnects
from
the network cable, all IP configuration should be deleted by the
system
automatically.

Currently, we can check the following configuration on laptop:

1. IE setting:

1) Open IE and then Click Internet Options on Tools menu.
2) Click Connections and then click LAN settings.
3) Check if you have selected Automatically detect settings.
4) Please do not use Proxy server to see how thing goes.

2. IP address and DNS settings:

1) Right click My Network Places and select Properties.
2) Open the properties of the Network Connection you are using to
connect
to internet on home.
3) Select TCP/IP and then click Properties.
4) Have you specified the SBS as the DNS server?
5) Make sure you have selected Obtain an IP address automatically
and
Obtain DNS server address automatically if you are obtaining the IP
and
DNS
from ISP automatically when you surf internet at home.
6) Click Advanced and then check if you have configured SBS on it.

If you do want release an IP address, you can use the following
command:

ipconfig /release

ipconfig /renew

Hope it helps and I look forward to hearing from you.

Best regards,

Crina Li (MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

=====================================================
This newsgroup only focuses on SBS technical issues. If you have
issues
regarding other Microsoft products, you'd better post in the
corresponding
newsgroups so that they can be resolved in an efficient and timely
manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you
check
the
"Notify me of replies" box to receive e-mail notifications when
there
are
any updates in your thread. When responding to posts via your
newsreader,
please "Reply to Group" so that others may learn and benefit from
your
issue.

Microsoft engineers can only focus on one issue per thread.
Although
we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean.
In
doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly.
Please
check http://support.microsoft.com for regional support phone
numbers.

Any input or comments in this thread are highly appreciated.

=====================================================

This posting is provided "AS IS" with no warranties, and confers no
rights.
--------------------
| Thread-Topic: Non-domain connection problem
|| From: "=?Utf-8?B?TGlhbQ==?=" <Liam@xxxxxxxxxxxxxxxxxxxxxxxxx>
| Subject: Non-domain connection problem
| Date: Sun, 12 Feb 2006 21:41:27 -0800
| | Newsgroups: microsoft.public.windows.server.sbs
| |
| Greetings,
|
| I appreciate any insght into this unusual network case.
|
| SUMMARY
|
| When a client PC is physically removed from the domain it cannot
access
the
| Internet unless the VPN software is running.
|
| SITUATION
|
| When users physically remove their PC's from our domain (they
take
them
home
| at night) they are unable to surf the Internet from home.
| The only way for them to connect to the Internet is to use the
VPN
client
| software.
| Once they are connected to our Domain, they can surf!
|
| HISTORY
|
| The domain has two locations 20 kilometres apart. They are
connected
with
a
| persistent VPN tunnel. For 10 months users can access resources
at/from
both
| sides.
| Users have been able to go home and VPN into the network.
| Users were able to connect to the Internet from home without any
trouble
and
| without using the VPN client software.
| A MS Server 2003 was installed at the remote site as a local data
store.
| Since this has been installed, the users cannot connect to
Internet
UNLESS
| the vpn software is running.
|
| SOME TEST RESULTS
|
| PING works from home.
| IPOCONFIG shows a local ip address (from a home router).
| NSLOOKUP always shows the IP address of the main SBS2003 server.
| Hence the need to connect via VPN to get on the Internet.
|
| QUESTION
| How do I get my clients to release the IP address of the main
SBS2003
server
| so that they can surf the net from home?
|
| Thanks for helping,
|
| Liam
|
|










.

Relevant Pages

  • Re: Urgent! New router and big disaster
    ... The SBS DNS server, running on ... its IP it means that your problem is now DNS. ... forward ports to it reliably in the router. ... I should have been more clear about internet connection.. ...
    (microsoft.public.windows.server.sbs)
  • Re: CEICW & software updates...
    ... SBS/Windows Server 2003, etc is just not quite UPNP aware the way it ... MVPs do not work for Microsoft ... I'm not getting prompted for an internet connection type. ... DNS server is installed and not disabled Call to Changing ...
    (microsoft.public.windows.server.sbs)
  • Re: Outgoing POP3 email missing/lost/not received
    ... ISP's mail server instead of the domain name on the ... SUMMARY OF SETTINGS FOR CONFIGURE E-MAIL AND INTERNET ... Internet Connection Wizard. ... After the wizard completes, the following network connection ...
    (microsoft.public.windows.server.sbs)
  • Re: Urgent! New router and big disaster
    ... Server Local Area Connection: ... Connection-specific DNS Suffix: ... dish that I have currently plugged into the router. ...
    (microsoft.public.windows.server.sbs)
  • Re: Urgent! New router and big disaster
    ... Server Local Area Connection: ... Connection-specific DNS Suffix: ... dish that I have currently plugged into the router. ...
    (microsoft.public.windows.server.sbs)