RAID and sbs 2003



I am looking into setting up our system as a raid. I have looked
through the posts, but I am still perplexed. I would appreciate any
help you could offer.

Here is our situation;
We currently have two identical SATA drives. The first drive is cut up
into two (c and d). C has all our system files, while d has most of
our data storage. The 2nd drive is used for backups..

Here are my questions;

1) Is there a way to set this up as a RAID? The two things we are
hoping to achieve is a performance increase, and having a copy if one
of the disks fail.

2) Should I use the onboard raid controller, or should I invest in a
add on controller card (any suggestions)?

3) Which raid type should I use?

Thanks as always, you folks rule.

.



Relevant Pages

  • Re: Disk partitioning question
    ... A hardware RAID Volume may exist without any RAID Drives on it. ... > This single array will show up as Disk 0 in Windows Disk Manager. ...
    (microsoft.public.windows.server.sbs)
  • Re: Need help installing OS6 on Dell PowerEdge 2600 with PERC4/Di RAID
    ... > like a fresh install and porting their application and data to the new system. ... PERC4/Di RAID on the motherboard, Dell DLT tape drive, Dell slimline ... PATA connector usable for two PATA drives. ... After downloading drivers from both SCO and Dell to create the ...
    (comp.unix.sco.misc)
  • Re: Disk partitioning question
    ... > A hardware RAID Volume may exist without any RAID Drives on it. ... This single array will show up as Disk 0 in Windows Disk ...
    (microsoft.public.windows.server.sbs)
  • How I built a 2.8TB RAID storage array
    ... My 2.8TB RAID 5 array is finally up and running. ... Nine 400GB PATA drives; eight for use, ... Two Highpoint RocketRAID 454 cards. ...
    (comp.os.linux.hardware)
  • Re: Paul and Old Man: Cannot fix RAID5 failure ...
    ... all of the sudden the Intel Matrix Storage ROM showed Rebuild status. ... When booting form RAID, there is some activity while the screen is black, ... Considering 3 SATA drives spining up after powerdown may cause a 12V ... I was considering a parallel WinXP installation on a 4th disk, ...
    (alt.comp.periphs.mainboard.asus)