Re: CEICW fails at firewall config

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

tks Jan. OF COURSE!!!!, 292822.

but then, you know what my memory is like.

"Jan" <jan@.n.o.com> wrote in message
news:O6BhBDWJGHA.2828@xxxxxxxxxxxxxxxxxxxxxxx
> 292822 :-)
>
> --
> Jan Wakulicz
> www.micropol.com.au
>
>
> "SuperGumby [SBS MVP]" <not@xxxxxxxxxxx> wrote in message
> news:Oz74A1QJGHA.2828@xxxxxxxxxxxxxxxxxxxxxxx
>> Merv probably won't mind the email but I had to comment.
>>
>> There is normally _no_ information in your IPConfig which if publicised
>> will allow compromise of your system, note mine
>>
>> Windows IP Configuration
>>
>> Host Name . . . . . . . . . . . . : sbs
>> Primary Dns Suffix . . . . . . . : lc.lan
>> Node Type . . . . . . . . . . . . : Unknown
>> IP Routing Enabled. . . . . . . . : Yes
>> WINS Proxy Enabled. . . . . . . . : Yes
>> DNS Suffix Search List. . . . . . : lc.lan
>>
>> Ethernet adapter Server Local Area Connection:
>>
>> Connection-specific DNS Suffix . :
>> Description . . . . . . . . . . . : NetServer 10/100TX PCI LAN Adapter
>> Physical Address. . . . . . . . . : 00-60-B0-68-EE-2D
>> DHCP Enabled. . . . . . . . . . . : No
>> IP Address. . . . . . . . . . . . : 192.168.250.2
>> Subnet Mask . . . . . . . . . . . : 255.255.255.0
>> Default Gateway . . . . . . . . . :
>> DNS Servers . . . . . . . . . . . : 192.168.250.2
>> Primary WINS Server . . . . . . . : 192.168.250.2
>>
>> PPP adapter RAS Server (Dial In) Interface:
>>
>> Connection-specific DNS Suffix . :
>> Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
>> Physical Address. . . . . . . . . : 00-53-45-00-00-00
>> DHCP Enabled. . . . . . . . . . . : No
>> IP Address. . . . . . . . . . . . : 192.168.250.16
>> Subnet Mask . . . . . . . . . . . : 255.255.255.255
>> Default Gateway . . . . . . . . . :
>> NetBIOS over Tcpip. . . . . . . . : Disabled
>>
>> Ethernet adapter External:
>>
>> Connection-specific DNS Suffix . :
>> Description . . . . . . . . . . . : Realtek RTL8139 Family PCI Fast
>> Ethernet NIC
>> Physical Address. . . . . . . . . : 00-20-18-A1-39-42
>> DHCP Enabled. . . . . . . . . . . : No
>> IP Address. . . . . . . . . . . . : 192.168.168.2
>> Subnet Mask . . . . . . . . . . . : 255.255.255.0
>> Default Gateway . . . . . . . . . : 192.168.168.1
>> DNS Servers . . . . . . . . . . . : 192.168.250.2
>> NetBIOS over Tcpip. . . . . . . . : Disabled
>>
>> Items which people feel they may be concerned about:
>> Physical addresses of adapters. These can be removed, they are of no
>> benefit to us and there is some slight possibility that an attacker could
>> benefit from them.
>> 'external' and 'internal' subnets. To get at your external subnet they
>> must compromise your router, having done so they must also compromise SBS
>> to get at the internal subnet. There is justification to 'munge' these,
>> but if you do so do it in a consistent manner. In my case replacing
>> 192.168.168 with a.b.c and 192.168.250 with x.y.z
>>
>> The one that really makes me laugh is when people have the external
>> adapter on a public IP, so they remove this information, then post from
>> behind SBS. Every post has the public IP in it's header.
>>
>> hmmm, that's wierd, when did I disable NETBIOS on RAS
>>
>> "MikeR" <research@xxxxxxxxxxxxxxxxxx> wrote in message
>> news:e6eIJoQJGHA.532@xxxxxxxxxxxxxxxxxxxxxxx
>>> ISA2004 is installed and has been running for several months just fine
>>> (prior to that was of course 2000).
>>> Yes, the complete SP1 package was installed when it was first available.
>>> No CRM.
>>> Correct, 2 NIC's, netopia router for the T1.
>>> I don't want to post the ipconfig to the newsgroup but I will send it to
>>> you at the email below (remove the no spam).
>>>
>>> I will look at the link.
>>>
>>>
>>>
>>> "Merv Porter [SBS-MVP]" <mwport@xxxxxxxxxxxxxxxxxxx> wrote in message
>>> news:O$JtlEQJGHA.1848@xxxxxxxxxxxxxxxxxxxxxxx
>>>> Mike,
>>>>
>>>> Something doesn't smell right here....
>>>>
>>>> Do you or do you not have ISA 2000 or ISA 2004 installed on the SBS
>>>> server?
>>>> If ISA 2004, did you install the complete SBS 2003 SP1 package?
>>>> Do you have CRM installed?
>>>> Do you have 2 NICs in the SBS (maybe plus a router)?
>>>> Can you please capture and post an ipconfig /all for the server?
>>>>
>>>> This thread may haold more clues...
>>>>
>>>> CEICW fails on firewall configuration every time. Please help.
>>>> http://groups.google.com/group/microsoft.public.windows.server.sbs/browse_frm/thread/ff820dab5f85196d/1e7c4ec242fb96eb?lnk=st&q=Error+0x800700b7+returned+from+call+to+Creating+tcp+port+mapping+protocol(&rnum=1&hl=en#1e7c4ec242fb96eb
>>>>
>>>> --
>>>> Merv Porter [SBS MVP]
>>>> ===================================
>>>> "MikeR" <research@xxxxxxxxxxxxxxxxxx> wrote in message
>>>> news:OPyqlZPJGHA.648@xxxxxxxxxxxxxxxxxxxxxxx
>>>>>I had seen that one before. I am not connecting using any of the
>>>>>methods listed.
>>>>> Any other ideas? I am still searching too but I haven't found yet.
>>>>>
>>>>> Thanks though!
>>>>>
>>>>>
>>>>>
>>>>> "Merv Porter [SBS-MVP]" <mwport@xxxxxxxxxxxxxxxxxxx> wrote in message
>>>>> news:uPtjL4NJGHA.3000@xxxxxxxxxxxxxxxxxxxxxxx
>>>>>> Mike,
>>>>>>
>>>>>> See if this KB article leads to answer for the RWW issue...
>>>>>>
>>>>>> ISA Server prevents connection to a remote desktop when you connect
>>>>>> through Remote Web Workplace on a Windows Small Business Server
>>>>>> 2003-based computer
>>>>>> http://support.microsoft.com/default.aspx?scid=kb;en-us;828053
>>>>>>
>>>>>> -----------------------------------
>>>>>> Error message 1
>>>>>> The client could not connect to the remote computer. Remote
>>>>>> connections might not be enabled or the computer might be too busy to
>>>>>> accept new connections. It is also possible that network problems are
>>>>>> preventing your connection. Please try connecting again later. If the
>>>>>> problem continues to occur, contact your administrator.
>>>>>>
>>>>>> Scenario one
>>>>>> + You connect to a Remote Web Workplace on a Windows Small Business
>>>>>> Server 2003-based computer from a computer that is running Internet
>>>>>> Security and Acceleration (ISA) Server as a firewall.
>>>>>> + You click the Connect to Server Desktops link on the Remote Web
>>>>>> Workplace to access server desktops in your network.
>>>>>> This problem occurs in scenario one because ISA Server blocks
>>>>>> outbound traffic over port 4125. When you try to connect to server
>>>>>> desktops through the Connect to Server Desktops link on the Remote
>>>>>> Web Workplace, the connection uses TCP port 4125.
>>>>>>
>>>>>> Resolution for scenario one: Create an IP packet filter on your ISA
>>>>>> Server
>>>>>> If you want to connect to the Remote Web Workplace from a computer
>>>>>> that is running ISA Server, you cannot install Firewall Client on the
>>>>>> ISA Server. Therefore, you must configure an IP packet filter for
>>>>>> port 4125 on the ISA Server. To configure an IP packet filter on your
>>>>>> ISA Server, follow these steps:1. Click Start, point to Programs,
>>>>>> point to Microsoft ISA Server, and then click ISA Management.
>>>>>> 2. In the ISA Management console tree, expand Servers and Arrays,
>>>>>> expand Your_Server_Name, and then expand Access Policy.
>>>>>> 3. Right-click IP Packet Filters, point to New, and then click
>>>>>> Filter.
>>>>>> 4. In the IP Packet filter name box, type the name that you want to
>>>>>> give the packet filter, and then click Next.
>>>>>> 5. On the Filter Mode page, click Allow packet transmission, and then
>>>>>> click Next.
>>>>>> 6. On the Filter Type page, click Custom, and then click Next.
>>>>>> 7. On the Filter Settings page, in the IP Protocol list, click TCP.
>>>>>> 8. In the Direction list, click Outbound.
>>>>>> 9. In the Local port list, click All ports.
>>>>>> 10. In the Remote port list, click Fixed port.
>>>>>> 11. In the Port number box, type 4125, and then click Next.
>>>>>> 12. On the Local Computer page, click Default IP addresses for each
>>>>>> external interface on the ISA Server computer, and then click Next.
>>>>>> 13. On the Remote Computers page, click All remote computers, and
>>>>>> then click Next.
>>>>>> 14. Click Finish.
>>>>>> -----------------------------------
>>>>>>
>>>>>> --
>>>>>> Merv Porter [SBS MVP]
>>>>>> ===================================
>>>>>> "MikeR" <research@xxxxxxxxxxxxxxxxxx> wrote in message
>>>>>> news:%232YtZWJJGHA.1368@xxxxxxxxxxxxxxxxxxxxxxx
>>>>>>> Here is the text from the file...I couldn't upload it...is there a
>>>>>>> limit on the newsgroup server? There is a lot of chatter about upnp
>>>>>>> but I know hte router is not upnp. Also looks like 2k3 knows it
>>>>>>> judging by line 19.
>>>>>>>
>>>>>>>
>>>>>>> 1/28/2006 9:16 PM
>>>>>>> C:\Program Files\Microsoft Windows Small Business
>>>>>>> Server\Networking\ICW\wizinet.dll, version 5.2.2893.0
>>>>>>> calling CNetCommit::ValidatePropertyBag ().
>>>>>>> Call to Querying for the property bag () returned ok.
>>>>>>> Call to Reading hardware selection () returned ok.
>>>>>>> Hardware selection: 0
>>>>>>> Call to Validating hardware selection () returned ok.
>>>>>>> Call to Initializing the Stingray util in ValidateNICProperties ()
>>>>>>> returned ok.
>>>>>>> Call to Reading LAN NIC Guid () returned ok.
>>>>>>> LAN NIC Guid: {E31F615D-A81A-4CD6-B43E-C29B6B7C2385}
>>>>>>> Call to Validating LAN NIC Guid () returned ok.
>>>>>>> Call to Getting the IP address for the LAN NIC () returned ok.
>>>>>>> LAN NIC IP: masked internal ip
>>>>>>> Call to Validating NIC properties () returned ok.
>>>>>>> Broadband selection: 1
>>>>>>> Call to Validating broadband selection () returned ok.
>>>>>>> calling CNetCommit::ValidateRouterConnectionProperties ().
>>>>>>> Call to Reading UPNP selection () returned ok.
>>>>>>> NOT a UPnP router
>>>>>>> Call to Reading Router IP () returned ok.
>>>>>>> Router IP: I masked the ip
>>>>>>> Call to Validating Router IP () returned ok.
>>>>>>> Call to Reading preferred DNS server IP () returned ok.
>>>>>>> Preferred DNS server IP: 64.81.79.2
>>>>>>> Call to Validating preferred DNS server IP () returned ok.
>>>>>>> Call to Reading alternate DNS server IP () returned ok.
>>>>>>> Alternate DNS server IP: 216.231.41.2
>>>>>>> Call to Validating alternate DNS server IP () returned ok.
>>>>>>> Call to Validating preferred and alternate DNS servers () returned
>>>>>>> ok.
>>>>>>> Call to Reading router on second NIC () returned ok.
>>>>>>> Router is connected through the second NIC
>>>>>>> Call to Initializing the Stingray util in ValidateNICProperties ()
>>>>>>> returned ok.
>>>>>>> Call to Reading LAN NIC Guid () returned ok.
>>>>>>> LAN NIC Guid: {E31F615D-A81A-4CD6-B43E-C29B6B7C2385}
>>>>>>> Call to Validating LAN NIC Guid () returned ok.
>>>>>>> Call to Getting the IP address for the LAN NIC () returned ok.
>>>>>>> LAN NIC IP: masked internal ip
>>>>>>> Call to Reading 2nd NIC Guid () returned ok.
>>>>>>> External NIC Guid: {3FE69066-D982-4DC2-B2FC-3C72C2D54E59}
>>>>>>> Call to Validating external NIC Guid () returned ok.
>>>>>>> Call to Validating the external IP against LAT () returned ok.
>>>>>>> Call to CNetCommit::ValidateRouterConnectionProperties () returned
>>>>>>> ok.
>>>>>>>
>>>>>>> 1/28/2006 9:16 PM
>>>>>>> C:\Program Files\Microsoft Windows Small Business
>>>>>>> Server\Networking\ICW\wizproxy.dll, version 5.2.2893.0
>>>>>>> CStingrayCommit::ValidatePropertyBag
>>>>>>> Call to Querying for IPropertyPagePropertyBag () returned ok.
>>>>>>> Call to Initializing the StringrayUtil () returned ok.
>>>>>>> Call to Reading the firewall selection () returned ok.
>>>>>>> Firewall selection: 1
>>>>>>> CStingrayCommit::ValidateUpnpProperties
>>>>>>> Call to Reading the UPNP selection () returned ok.
>>>>>>> Skipping upnp validation
>>>>>>> Call to CStingrayCommit::ValidateUpnpProperties () returned ok.
>>>>>>> Call to Validating Upnp properties () returned ok.
>>>>>>> CStingrayCommit::ValidatePortMappings
>>>>>>> Call to Reading the port mappings () returned ok.
>>>>>>> Call to Loading port mappings XML () returned ok.
>>>>>>> Call to Validating the predefined port mappings XML () returned ok.
>>>>>>> Call to Reading the custom port mappings () returned ok.
>>>>>>> Loading port mapping XML
>>>>>>> Call to Validating the custom port mappings XML () returned ok.
>>>>>>> Call to CStingrayCommit::ValidatePortMappings () returned ok.
>>>>>>> Call to Validating port mappings () returned ok.
>>>>>>> CStingrayCommit::ValidateWebPublishingRules
>>>>>>> Call to Reading web publishing selection () returned ok.
>>>>>>> Call to Validating Web publishing selections () returned ok.
>>>>>>> Web publishing selections:
>>>>>>> OWA publishing: 1
>>>>>>> RUP publishing: 1
>>>>>>> Monitoring publishing: 0
>>>>>>> OMA publishing: 1
>>>>>>> RPC publishing: 1
>>>>>>> Sharepoint publishing: 0
>>>>>>> ROOT publishing: 1
>>>>>>> Call to CStingrayCommit::ValidateWebPublishingRules () returned ok.
>>>>>>> Call to Validating web publishing rules () returned ok.
>>>>>>> Call to CStingrayCommit::ValidatePropertyBag () returned ok.
>>>>>>>
>>>>>>> 1/28/2006 9:16 PM
>>>>>>> C:\Program Files\Microsoft Windows Small Business
>>>>>>> Server\Networking\ICW\wizcert.dll, version 5.2.2893.0
>>>>>>> Calling CCertCommit::ValidatePropertyBag
>>>>>>> Require SSL for OWA: 1
>>>>>>> Require SSL for Remote Portal: 1
>>>>>>> Require SSL for Monitoring: 0
>>>>>>> Require SSL for OMA: 0
>>>>>>> Require SSL for CompanyWeb: 0
>>>>>>> Require 128 Bit Encryption: 1
>>>>>>> Cert selection: -1
>>>>>>> CCertCommit::ValidatePropertyBag returned OK
>>>>>>>
>>>>>>> 1/28/2006 9:16 PM
>>>>>>> C:\Program Files\Microsoft Windows Small Business
>>>>>>> Server\Networking\ICW\wizemail.dll, version 5.2.2893.0
>>>>>>> calling CEmailCommit::ValidatePropertyBag ().
>>>>>>> calling pdispPPPBag->QueryInterface (IPropertyPagePropertyBag,
>>>>>>> 0x6e50c).
>>>>>>> Call to pdispPPPBag->QueryInterface () returned ok.
>>>>>>> calling ReadInt4 (0x25c838, DB5E5E45-3598-4F1D-8FF7-0ED35B9EB6A4).
>>>>>>> Call to ReadInt4 () returned ok.
>>>>>>> The out param of ReadInt4() is -1.
>>>>>>> calling CValidatePropertyUtil.ValidatePropertyInteger ().
>>>>>>> Call to CValidatePropertyUtil.ValidatePropertyInteger () returned
>>>>>>> ok.
>>>>>>> Call to CEMailCommit::ValidatePropertyBag () returned ok.
>>>>>>> calling CNetCommit::Commit (2476088).
>>>>>>> calling CNetCommit::ValidatePropertyBag ().
>>>>>>> Call to Querying for the property bag () returned ok.
>>>>>>> Property bag is not dirty, skipping validation
>>>>>>> calling CNetCommit::Common ().
>>>>>>> calling CNetCommit::GetLanNicInfo ().
>>>>>>> LAN NIC Guid: {E31F615D-A81A-4CD6-B43E-C29B6B7C2385}
>>>>>>> Call to Converting LAN NIC Guid () returned ok.
>>>>>>> Call to Getting IP address for the LAN NIC () returned ok.
>>>>>>> Call to Reading in the LAN NIC info () returned ok.
>>>>>>> Call to Fixing the TCP/IP NIC Binding order () returned ok.
>>>>>>> Dhcp server is installed and not disabled
>>>>>>> Call to Set DHCP Server to start up automatically () returned ok.
>>>>>>> DNS server is installed and not disabled
>>>>>>> Call to Changing startup type for DNS () returned ok.
>>>>>>> Call to Clearing DNS server entries on the LAN NIC () returned ok.
>>>>>>> Call to Setting DNS server IP for the LAN NIC () returned ok.
>>>>>>> Call to Resetting DNS recursion timeout () returned ok.
>>>>>>> Call to Resetting client dns query timouts in config.dat () returned
>>>>>>> ok.
>>>>>>> Call to DsGetDcName for local domain name () returned ok.
>>>>>>> calling CNetCommit::DoRouter ().
>>>>>>> Call to Converting external NIC guid () returned ok.
>>>>>>> Call to Clearing the default gateway on the LAN NIC () returned ok.
>>>>>>> Call to Clearing the default gateway on the external NIC () returned
>>>>>>> ok.
>>>>>>> Call to Setting default gateway on the external NIC () returned ok.
>>>>>>> Call to Setting DNS forwarders () returned ok.
>>>>>>> Call to Clearing DNS servers on the external NIC () returned ok.
>>>>>>> Call to Making sure external NIC points to the local DNS server ()
>>>>>>> returned ok.
>>>>>>> Call to GetLocalDomainName () returned ok.
>>>>>>> Call to Deleting the DNS record for the external NIC () returned ok.
>>>>>>> Call to Preparing DNS for DNS listener reset () returned ok.
>>>>>>> Call to Resetting DNS listeners () returned ok.
>>>>>>> Call to Disabling dns registration on the external NIC () returned
>>>>>>> ok.
>>>>>>> Call to Disabling services on the external NIC () returned ok.
>>>>>>> Call to Disabling NetBIOS for the external NIC () returned ok.
>>>>>>> URL to the router is http://I masked the ip
>>>>>>> Call to Adding routers IP address to the intranet zone () returned
>>>>>>> ok.
>>>>>>> Call to CNetCommit::DoRouter () returned ok.
>>>>>>> Call to Configuring for router connection () returned ok.
>>>>>>> calling ConfigureIE ().
>>>>>>> calling SetInternetOptions ((null), servername:8080, <local>).
>>>>>>> calling InternetSetOptionA (NULL,
>>>>>>> INTERNET_OPTION_PER_CONNECTION_OPTION).
>>>>>>> Call to InternetSetOptionA () returned ok.
>>>>>>> Call to SetInternetOptions () returned ok.
>>>>>>> calling InternetSetOption_AutodialConnection ().
>>>>>>> Call to InternetSetOption_AutodialConnection () returned ok.
>>>>>>> calling InternetSetOption_AutodialMode (1).
>>>>>>> Call to InternetSetOption_AutodialMode () returned ok.
>>>>>>> calling InternetSetOption_DisableAutodial (1).
>>>>>>> Call to InternetSetOption_DisableAutodial () returned ok.
>>>>>>> Call to ConfigureIE () returned ok.
>>>>>>> Call to Configuring IE for router connection () returned ok.
>>>>>>> Call to Notifying client setup for Default gateway as the SBS server
>>>>>>> () returned ok.
>>>>>>> Call to Initializing the Stingray util () returned ok.
>>>>>>> Call to Turning Stingray autodial off () returned ok.
>>>>>>> ISA2k Autodial rule does not exist, ignoring the error
>>>>>>> Call to CNetCommit::RemoveISA2kAutodialRule () returned ok.
>>>>>>> Call to Removing ISA autodial rule ROUTINGRULE_AUTODIAL () returned
>>>>>>> ok.
>>>>>>> ISA2k Autodial rule does not exist, ignoring the error
>>>>>>> Call to CNetCommit::RemoveISA2kAutodialRule () returned ok.
>>>>>>> Call to Removing ISA autodial rule ROUTINGRULE_INTERNALAUTODIAL ()
>>>>>>> returned ok.
>>>>>>> Call to CNetCommit::RemoveISA2kRelatedAutodialRules () returned ok.
>>>>>>> Call to Removing ISA2k related autodial rules () returned ok.
>>>>>>> calling RegisterMSBOExchangeBP (0).
>>>>>>> Error 0x1 returned from call to RegisterMSBOExchangeBP().
>>>>>>> Call to Unregistering the smtp sink () returned ok.
>>>>>>> Call to Initializing the Stingray util in CreateLANAccessRule ()
>>>>>>> returned ok.
>>>>>>> Call to Creating the protected networks access rule () returned ok.
>>>>>>> Call to Saving ISA2k4 changes () returned ok.
>>>>>>> Call to GetLocalDomainName () returned ok.
>>>>>>> Call to Reading in the local domain name () returned ok.
>>>>>>> Local Domain Name is: companyname.local
>>>>>>> Call to Enabling secure dynamic DNS updates () returned ok.
>>>>>>> Call to Disabling RoundRobin for DNS server () returned ok.
>>>>>>> Call to GetLocalDomainName () returned ok.
>>>>>>> Call to Configuring DHCP options () returned ok.
>>>>>>> Call to Disabling the RASUTO service () returned ok.
>>>>>>> Call to Configuring w32time parameters for fulltime () returned ok.
>>>>>>> Call to Configuring the time service () returned ok.
>>>>>>> Call to Notifying RWW for ISA () returned ok.
>>>>>>> Call to CNetCommit::Common () returned ok.
>>>>>>> Call to CNetCommit::Commit () returned ok.
>>>>>>> CStingrayCommit::CommitEx
>>>>>>> CStingrayCommit::ValidatePropertyBag
>>>>>>> Call to Querying for IPropertyPagePropertyBag () returned ok.
>>>>>>> Call to Initializing the StringrayUtil () returned ok.
>>>>>>> Call to Reading the firewall selection () returned ok.
>>>>>>> Firewall selection: 1
>>>>>>> CStingrayCommit::ValidateUpnpProperties
>>>>>>> Call to Reading the UPNP selection () returned ok.
>>>>>>> Skipping upnp validation
>>>>>>> Call to CStingrayCommit::ValidateUpnpProperties () returned ok.
>>>>>>> Call to Validating Upnp properties () returned ok.
>>>>>>> CStingrayCommit::ValidatePortMappings
>>>>>>> Call to Reading the port mappings () returned ok.
>>>>>>> Call to Loading port mappings XML () returned ok.
>>>>>>> Call to Validating the predefined port mappings XML () returned ok.
>>>>>>> Call to Reading the custom port mappings () returned ok.
>>>>>>> Loading port mapping XML
>>>>>>> Call to Validating the custom port mappings XML () returned ok.
>>>>>>> Call to CStingrayCommit::ValidatePortMappings () returned ok.
>>>>>>> Call to Validating port mappings () returned ok.
>>>>>>> CStingrayCommit::ValidateWebPublishingRules
>>>>>>> Call to Reading web publishing selection () returned ok.
>>>>>>> Call to Validating Web publishing selections () returned ok.
>>>>>>> Web publishing selections:
>>>>>>> OWA publishing: 1
>>>>>>> RUP publishing: 1
>>>>>>> Monitoring publishing: 0
>>>>>>> OMA publishing: 1
>>>>>>> RPC publishing: 1
>>>>>>> Sharepoint publishing: 0
>>>>>>> ROOT publishing: 1
>>>>>>> Call to CStingrayCommit::ValidateWebPublishingRules () returned ok.
>>>>>>> Call to Validating web publishing rules () returned ok.
>>>>>>> Call to CStingrayCommit::ValidatePropertyBag () returned ok.
>>>>>>> Call to Validating the property bag () returned ok.
>>>>>>> Call to Reading the guid for the LAN NIC () returned ok.
>>>>>>> Call to Getting the IP address for the LAN NIC () returned ok.
>>>>>>> Call to Getting the SM for the LAN NIC () returned ok.
>>>>>>> LAN NIC Info:
>>>>>>> Guid: {E31F615D-A81A-4CD6-B43E-C29B6B7C2385}
>>>>>>> IP: masked internal ip
>>>>>>> SM: 255.255.255.0
>>>>>>> Call to Removing RRAS NAT () returned ok.
>>>>>>> CStingrayCommit::DoGeneralConfiguration
>>>>>>> Call to Removing SBS access rules () returned ok.
>>>>>>> Call to SBS MS Update Access Rule () returned ok.
>>>>>>> Call to Creating SBS Internet Access Rule () returned ok.
>>>>>>> Call to Setting default logon domain for OMA () returned ok.
>>>>>>> Call to Configuring anonymous access for SBS dirs () returned ok.
>>>>>>> Call to Disabling auto discovery () returned ok.
>>>>>>> Call to Configuring IIS to listen only on the LAN () returned ok.
>>>>>>> Call to Setting local domain name () returned ok.
>>>>>>> Call to Disabling H323 application filter () returned ok.
>>>>>>> Call to Disabling active caching () returned ok.
>>>>>>> Call to Setting up web proxy listeners () returned ok.
>>>>>>> Call to CStingrayCommit::DoGeneralConfiguration () returned ok.
>>>>>>> Call to Doing general configuration () returned ok.
>>>>>>>
>>>>>>> 1/28/2006 9:17 PM
>>>>>>> Firewall Rule: SBS DHCP Client
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: SBS HTTP 80 Out CustomFilter
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: SBS FTP 20 In CustomFilter
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: SBS FTP 20 Out CustomFilter
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: SBS POP3 110 Out CustomFilter
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: SBS NTP 123 Out CustomFilter
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: SBS DnsLookupPredefinedType
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: SBS IcmpPingQueryPredefinedType
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: SBS IdentdPredefinedType
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: SBS TS 3389 In CustomFilter
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: SBS TS 3389 Out CustomFilter
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: SBS PptpReceivePredefinedType
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: SBS PptpCallPredefinedType
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: SBS FTP 21 In CustomFilter
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: SBS FTP 21 Out CustomFilter
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: SBS SMTP 25 Out CustomFilter
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: SBS SmtpPredefinedType
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: SBS NNTP 119 Out CustomFilter
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: SBS Remote Web Workplace CustomFilter
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: SBS NTP 123 Out CustomFilter
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: Small Business RPC over HTTP Publishing Rule
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: Small Business Business Card Publishing Rule
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: Small Business CompanyWeb Publishing Rule
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: Small Business TSWEB Publishing Rule
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: Small Business RUP Publishing Rule
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: Small Business Monitoring Publishing Rule
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: Small Business OMA Publishing Rule
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: Small Business OWA Web Publishing Rule
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: Small Business Web Publishing Rule
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: Small Business Server All Users Protocol Rule
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: Small Business Internet Access Protocol Rule
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: Small Business Internet Access Protocol Rule 2
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: Small Business Server Internet Access Site and
>>>>>>> Content Rule
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: Small Business Server Internet Access Site and
>>>>>>> Content Rule 2
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Firewall Rule: Small Business Server All Users Site and Content Rule
>>>>>>> Cannot find the firewall rule, ignoring the error
>>>>>>> Call to Removing ISA2k related firewall rules () returned ok.
>>>>>>> Custom protocol name: SBS FTP 20 In CustomFilter
>>>>>>> Cannot find the custom protocol, ignoring the error
>>>>>>> Custom protocol name: SBS FTP 20 Out CustomFilter
>>>>>>> Cannot find the custom protocol, ignoring the error
>>>>>>> Custom protocol name: SBS NTP 123 Out CustomFilter
>>>>>>> Cannot find the custom protocol, ignoring the error
>>>>>>> Custom protocol name: SBS Remote Web Workplace CustomFilter
>>>>>>> Cannot find the custom protocol, ignoring the error
>>>>>>> Call to Removing ISA2k related custom protocols () returned ok.
>>>>>>> Call to Removing inbound access rule allowing anybody in () returned
>>>>>>> ok.
>>>>>>> Call to Removing inbound access rule allowing anybody out ()
>>>>>>> returned ok.
>>>>>>> CStingrayCommit::CommitPortMappings
>>>>>>> CStringray::RemoveAllSpecialRules
>>>>>>> Call to Resetting the rule enumeration () returned ok.
>>>>>>> Call to MoveToNextSpecialRule () returned ok.
>>>>>>> Call to Getting the special rule info () returned ok.
>>>>>>> Removing the access rule SBS RWW Inbound Access Rule
>>>>>>> Call to Removing the access rule () returned ok.
>>>>>>> Call to MoveToNextSpecialRule () returned ok.
>>>>>>> Call to Getting the special rule info () returned ok.
>>>>>>> Removing the access rule SBS FTP Outbound Access Rule
>>>>>>> Call to Removing the access rule () returned ok.
>>>>>>> Call to MoveToNextSpecialRule () returned ok.
>>>>>>> Call to Getting the special rule info () returned ok.
>>>>>>> Removing the access rule SBS RDP Outbound Access Rule
>>>>>>> Call to Removing the access rule () returned ok.
>>>>>>> Call to MoveToNextSpecialRule () returned ok.
>>>>>>> Call to Getting the special rule info () returned ok.
>>>>>>> Removing the access rule SBS Smtp Server Access Rule
>>>>>>> Call to Removing the access rule () returned ok.
>>>>>>> Call to MoveToNextSpecialRule () returned ok.
>>>>>>> Call to Getting the special rule info () returned ok.
>>>>>>> Removing the access rule SBS POP3 Outbound Access Rule
>>>>>>> Call to Removing the access rule () returned ok.
>>>>>>> Call to MoveToNextSpecialRule () returned ok.
>>>>>>> Call to Getting the special rule info () returned ok.
>>>>>>> Removing the access rule SBS Localhost Dhcp Access Rule
>>>>>>> Call to Removing the access rule () returned ok.
>>>>>>> Call to MoveToNextSpecialRule () returned ok.
>>>>>>> Call to CStringray::RemoveAllSpecialRules () returned ok.
>>>>>>> Call to Removing all special firewall rules () returned ok.
>>>>>>> CStingrayCommit::CreateStandardPortMappings
>>>>>>> Call to Enabling the DHCP system policy () returned ok.
>>>>>>> Call to Enabling the CRL download system policy () returned ok.
>>>>>>> Call to Creating the DHCP access rule () returned ok.
>>>>>>> Call to Disabling ICMP () returned ok.
>>>>>>> Call to CStingrayCommit::CreateStandardPortMappings () returned ok.
>>>>>>> Call to Creating the standard filters () returned ok.
>>>>>>> CStingrayCommit::CreatePortMappingsFromXML
>>>>>>> Call to Resetting the port mapping list () returned ok.
>>>>>>> Call to Getting the number of port mappings () returned ok.
>>>>>>> Number of port mappings 5
>>>>>>> Call to Getting the next port mapping () returned ok.
>>>>>>> Call to Reading Port () returned ok.
>>>>>>> Call to Reading Protocol () returned ok.
>>>>>>> Call to Reading Direction () returned ok.
>>>>>>> Call to Validating TCP direction () returned ok.
>>>>>>> Call to Reading Enable () returned ok.
>>>>>>> Call to Getting the name for the predefined port mapping () returned
>>>>>>> ok.
>>>>>>> Call to Creating tcp port mapping protocol () returned ok.
>>>>>>> Call to Creating the outbound SMTP access rule () returned ok.
>>>>>>> Call to Creating the outbound POP3 access rule () returned ok.
>>>>>>> Call to Creating the outbound NNTP access rule () returned ok.
>>>>>>> Call to Handling predefined port mapping () returned ok.
>>>>>>> Creating access rule SBS Smtp Server Access Rule TCP 25 returned 0
>>>>>>> Call to Getting the next port mapping () returned ok.
>>>>>>> Call to Reading Port () returned ok.
>>>>>>> Call to Reading Protocol () returned ok.
>>>>>>> Call to Reading Direction () returned ok.
>>>>>>> Call to Validating TCP direction () returned ok.
>>>>>>> Call to Reading Enable () returned ok.
>>>>>>> Skipping the port mapping for Port 1723
>>>>>>> Call to Creating the outbound PPTP access rule () returned ok.
>>>>>>> Call to Handling predefined port mapping () returned ok.
>>>>>>> Call to Creating outbound PPTP access rule () returned ok.
>>>>>>> Call to Getting the next port mapping () returned ok.
>>>>>>> Call to Reading Port () returned ok.
>>>>>>> Call to Reading Protocol () returned ok.
>>>>>>> Call to Reading Direction () returned ok.
>>>>>>> Call to Validating TCP direction () returned ok.
>>>>>>> Call to Reading Enable () returned ok.
>>>>>>> Call to Getting the name for the predefined port mapping () returned
>>>>>>> ok.
>>>>>>> Call to Creating tcp port mapping protocol () returned ok.
>>>>>>> Call to Creating the outbound RDP access rule () returned ok.
>>>>>>> Call to Handling predefined port mapping () returned ok.
>>>>>>> Creating access rule SBS RDP Server Access Rule TCP 3389 returned 0
>>>>>>> Call to Getting the next port mapping () returned ok.
>>>>>>> Call to Reading Port () returned ok.
>>>>>>> Call to Reading Protocol () returned ok.
>>>>>>> Call to Reading Direction () returned ok.
>>>>>>> Call to Validating TCP direction () returned ok.
>>>>>>> Call to Reading Enable () returned ok.
>>>>>>> Call to Getting the name for the predefined port mapping () returned
>>>>>>> ok.
>>>>>>> Call to Creating tcp port mapping protocol () returned ok.
>>>>>>> Call to Creating the outbound FTP access rule () returned ok.
>>>>>>> Call to Handling predefined port mapping () returned ok.
>>>>>>> Creating access rule SBS FTP Server Access Rule TCP 21 returned 0
>>>>>>> Call to Getting the next port mapping () returned ok.
>>>>>>> Call to Reading Port () returned ok.
>>>>>>> Call to Reading Protocol () returned ok.
>>>>>>> Call to Reading Direction () returned ok.
>>>>>>> Call to Validating TCP direction () returned ok.
>>>>>>> Call to Reading Enable () returned ok.
>>>>>>> Skipping the port mapping for Port 80
>>>>>>> Call to CStingrayCommit::CreatePortMappingsFromXML () returned ok.
>>>>>>> Call to Creating predefined port mappings () returned ok.
>>>>>>> CStingrayCommit::CreatePortMappingsFromXML
>>>>>>> Call to Resetting the port mapping list () returned ok.
>>>>>>> Call to Getting the number of port mappings () returned ok.
>>>>>>> Number of port mappings 2
>>>>>>> Call to Getting the next port mapping () returned ok.
>>>>>>> Call to Reading Port () returned ok.
>>>>>>> Call to Reading Protocol () returned ok.
>>>>>>> Call to Reading Direction () returned ok.
>>>>>>> Call to Validating TCP direction () returned ok.
>>>>>>> Call to Reading Enable () returned ok.
>>>>>>> Call to Reading Name () returned ok.
>>>>>>> Call to Creating tcp port mapping protocol () returned ok.
>>>>>>> Creating access rule SBS RWW Inbound Access Rule TCP 1749 returned 0
>>>>>>> Call to Getting the next port mapping () returned ok.
>>>>>>> Call to Reading Port () returned ok.
>>>>>>> Call to Reading Protocol () returned ok.
>>>>>>> Call to Reading Direction () returned ok.
>>>>>>> Call to Validating TCP direction () returned ok.
>>>>>>> Call to Reading Enable () returned ok.
>>>>>>> Call to Getting the name for the predefined port mapping for RWW ()
>>>>>>> returned ok.
>>>>>>> Error 0x800700b7 returned from call to Creating tcp port mapping
>>>>>>> protocol().
>>>>>>> Error 0x800700b7 returned from call to
>>>>>>> CStingrayCommit::CreatePortMappingsFromXML().
>>>>>>> Error 0x800700b7 returned from call to Creating custom port
>>>>>>> mappings().
>>>>>>> Error 0x800700b7 returned from call to
>>>>>>> CStingrayCommit::CommitPortMappings().
>>>>>>> Error 0x800700b7 returned from call to Creating port mappings().
>>>>>>> Error 0x800700b7 returned from call to CStingrayCommit::CommitEx().
>>>>>>> Calling CCertCommit::CommitEx
>>>>>>> Calling CCertCommit::ValidatePropertyBag
>>>>>>> Require SSL for OWA: 1
>>>>>>> Require SSL for Remote Portal: 1
>>>>>>> Require SSL for Monitoring: 0
>>>>>>> Require SSL for OMA: 0
>>>>>>> Require SSL for CompanyWeb: 0
>>>>>>> Require 128 Bit Encryption: 1
>>>>>>> Cert selection: -1
>>>>>>> CCertCommit::ValidatePropertyBag returned OK
>>>>>>> Opening the cert store returned OK
>>>>>>> Reading the computer name returned OK
>>>>>>> Reading the fully qualified server name returned OK
>>>>>>> Reading web publishing selection returned OK
>>>>>>> Reading Sharepoint publishing value returned OK
>>>>>>> Sharepoint publishing: 0
>>>>>>> Initializing ISA2k4 Library returned OK
>>>>>>> *** Removing sharepoint publishing rule returned ERROR 80070002
>>>>>>> Rule not found, ignorning error and continuing.
>>>>>>> Removing Sbs CompanyWeb Listener returned OK
>>>>>>> Saving changes and restarting services returned OK
>>>>>>> Publishing CompanyWeb through ISA2k4 returned OK
>>>>>>> CCertCommit::EnableSSL returned OK
>>>>>>> CCertCommit::RequireSSL returned OK
>>>>>>> CCertCommit::NotifyRemoteUserPortal returned OK
>>>>>>> Reading the Internet Server Name returned OK
>>>>>>> Updating provisioning info returned OK
>>>>>>> Sending RUP intro mail returned OK
>>>>>>> CCertCommit::SaveUserSelections returned OK
>>>>>>> CCertCommit::CommitEx returned OK
>>>>>>> calling CEmailCommit::Commit (0xff4800).
>>>>>>> calling CEmailCommit::ValidatePropertyBag ().
>>>>>>> calling pdispPPPBag->QueryInterface (IPropertyPagePropertyBag,
>>>>>>> 0x6e488).
>>>>>>> Call to pdispPPPBag->QueryInterface () returned ok.
>>>>>>> calling ReadInt4 (0x25c838, DB5E5E45-3598-4F1D-8FF7-0ED35B9EB6A4).
>>>>>>> Call to ReadInt4 () returned ok.
>>>>>>> The out param of ReadInt4() is -1.
>>>>>>> calling CValidatePropertyUtil.ValidatePropertyInteger ().
>>>>>>> Call to CValidatePropertyUtil.ValidatePropertyInteger () returned
>>>>>>> ok.
>>>>>>> Call to CEMailCommit::ValidatePropertyBag () returned ok.
>>>>>>> calling pdispPPPBag->QueryInterface (IPropertyPagePropertyBag,
>>>>>>> 0x6e4f4).
>>>>>>> Call to pdispPPPBag->QueryInterface () returned ok.
>>>>>>> calling ReadInt4 (0x25c838, DB5E5E45-3598-4F1D-8FF7-0ED35B9EB6A4).
>>>>>>> Call to ReadInt4 () returned ok.
>>>>>>> The out param of ReadInt4() is -1.
>>>>>>> calling GetDomainAndControllerNames ().
>>>>>>> Call to GetDomainAndControllerNames () returned ok.
>>>>>>> calling GetOrganizationName (\\servername.companyname.local,
>>>>>>> DC=companyname,DC=local).
>>>>>>> Call to GetOrganizationName () returned ok.
>>>>>>> calling GetFirstAdministrativeGroup (\\servername.companyname.local,
>>>>>>> DC=companyname,DC=local, companyname).
>>>>>>> Call to GetFirstAdministrativeGroup () returned ok.
>>>>>>> calling GetFirstRoutingGroup (\\servername.companyname.local,
>>>>>>> DC=companyname,DC=local, companyname, first administrative group).
>>>>>>> Call to GetFirstRoutingGroup () returned ok.
>>>>>>> Call to SetCookieAuthentication () returned ok.
>>>>>>> Call to Enabling Wireless admin for OMA () returned ok.
>>>>>>> Call to Getting NETBIOS domain name () returned ok.
>>>>>>> NETBIOS domain name: companyname
>>>>>>> Call to Enabling NTLM on /public () returned ok.
>>>>>>> calling CommitPOP3 (0x25c838).
>>>>>>> Call to CommitPOP3 () returned ok.
>>>>>>> calling _SetRegInt4Value (HKEY_LOCAL_MACHINE,
>>>>>>> SOFTWARE\Microsoft\SmallBusinessServer\Connectivity\ICW,
>>>>>>> Last_MailOption_Exchange, -1).
>>>>>>> Ignoring return value from call to _SetRegInt4Value().
>>>>>>> Call to CEMailCommit::Commit () returned ok.
>>>>>>> calling GetBOConnector ().
>>>>>>> Call to GetBOConnector () returned ok.
>>>>>>> calling spADs->PutEx (ADS_PROPERTY_CLEAR,
>>>>>>> msExchSmtpOutboundSecurityPassword).
>>>>>>> Call to spADs->PutEx () returned ok.
>>>>>>> calling spADs->SetInfo ().
>>>>>>> Call to spADs->SetInfo () returned ok.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> "Merv Porter [SBS-MVP]" <mwport@xxxxxxxxxxxxxxxxxxx> wrote in
>>>>>>> message news:uMZUNkIJGHA.3100@xxxxxxxxxxxxxxxxxxxxxxx
>>>>>>>> Hi Mike,
>>>>>>>>
>>>>>>>> C:\Program Files\Microsoft Windows Small Business
>>>>>>>> Server\Support\icwlog.txt
>>>>>>>>
>>>>>>>>
>>>>>>>> You might want to first delete or rename icwlog.txt. This will
>>>>>>>> allow a fresh copy of the file to be created when you run CEICW.
>>>>>>>> Then re-run CEICW and post the resultant icwlog.txt file for us to
>>>>>>>> look at.
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Merv Porter [SBS MVP]
>>>>>>>> ===================================
>>>>>>>>
>>>>>>>> "MikeR" <research@xxxxxxxxxxxxxxxxxx> wrote in message
>>>>>>>> news:uRWWuXHJGHA.604@xxxxxxxxxxxxxxxxxxxxxxx
>>>>>>>>> Hi Merv,
>>>>>>>>>
>>>>>>>>> I ran it a week ago to be sure that OMA was enabled because I had
>>>>>>>>> an issue with a treo 700 not syncing with exchange. The odd thing
>>>>>>>>> about the first time I ran it was that it killed a few other
>>>>>>>>> things such as subfolder paths on the root website. Seems like it
>>>>>>>>> reverted to a "default" installation. It did not error out when I
>>>>>>>>> ran it a week ago though. All is forwarded fine from the router
>>>>>>>>> and I did select "enable firewall" and enabled the services that I
>>>>>>>>> want. It still finishes with errors when it gets to the firewall
>>>>>>>>> section. I don't use UPNP.
>>>>>>>>> Do you know of a method to determine an error code for the
>>>>>>>>> failure? Nothing appears in event viewer.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> "Merv Porter [SBS-MVP]" <mwport@xxxxxxxxxxxxxxxxxxx> wrote in
>>>>>>>>> message news:Ohs0FFGJGHA.500@xxxxxxxxxxxxxxxxxxxxxxx
>>>>>>>>>> OK, I gotta ask... Why did you run CEICW a week ago (what were
>>>>>>>>>> you adding or trying to fix)?
>>>>>>>>>>
>>>>>>>>>> When you ran CEICW, did you enable the firewall and select the
>>>>>>>>>> services you wanted to use?
>>>>>>>>>> Are ports 443 and 4125 forwarded from your router to your
>>>>>>>>>> external NIC? (I 'm assuming a 2 NIC + router network
>>>>>>>>>> configuration).
>>>>>>>>>>
>>>>>>>>>> If you re-run CEICW now, does it finish with any errors or
>>>>>>>>>> messages?
>>>>>>>>>>
>>>>>>>>>> And don't use the UPNP setup feature if CEICW offers (set up the
>>>>>>>>>> port forwarding manually in the router).
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Merv Porter [SBS MVP]
>>>>>>>>>> ===================================
>>>>>>>>>>
>>>>>>>>>> "MikeR" <research@xxxxxxxxxxxxxxxxxx> wrote in message
>>>>>>>>>> news:et6au7FJGHA.668@xxxxxxxxxxxxxxxxxxxxxxx
>>>>>>>>>>> There are no error codes displayed anywhere that I can find.
>>>>>>>>>>> This is a
>>>>>>>>>>> server that has been and is running fine otherwise. The reason I
>>>>>>>>>>> am trying
>>>>>>>>>>> to run CEICW is that I ran through it a week ago and since then
>>>>>>>>>>> cannot
>>>>>>>>>>> access computers via RWW. This always worked before. The error I
>>>>>>>>>>> receive
>>>>>>>>>>> when attempting to logon to any local computer via RWW is: "the
>>>>>>>>>>> client could
>>>>>>>>>>> not connect to the remote computer. remote connections might not
>>>>>>>>>>> be enabled
>>>>>>>>>>> or the computer might be too bust to accept connections. it is
>>>>>>>>>>> also possible
>>>>>>>>>>> that network problems are preventing your connection....." This
>>>>>>>>>>> is not a
>>>>>>>>>>> permissions issue as I cannot even log on as an administrator
>>>>>>>>>>> via RWW. I can log on via rdp from any local system as any user
>>>>>>>>>>> so remote connections are enabled. I am thinking that when I
>>>>>>>>>>> initially ran through the CEICW something hosed a rule that
>>>>>>>>>>> allowed terminal service through RWW.
>>>>>>>>>>> I appreciate any ideas.
>>>>>>>>>>>
>>>>>>>>>>> Mike
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>


.

Relevant Pages

  • Re: Confusion, chaos and more!
    ... DNS address it provides) to insure that only 192.168.36.21 is the DNS ... Ethernet adapter Local Area Connection: ... Ethernet adapter Wireless Network Connection: ... I have managed to work out that in the LAN setup of the router at work ...
    (microsoft.public.windows.server.dns)
  • Re: it says network cable not connected
    ... Maybe i'll get a USB to Ethernet adapter, ... PCI Express x1 card with Ethernet chip on it. ... I went out and bought a wireless router so I could ... plug my USB Wi-Fi adapter for her. ...
    (alt.comp.periphs.mainboard.asus)
  • Re: Which high speed internet access?
    ... I mentioned a wireless gateway, what their website calls the router ... I found somebody that could confirm that I did not need the adapter ... If I told the system I wanted to hook up another computer, ...
    (rec.scuba)
  • Question About VOIP
    ... I have VOIP service for my home and have a question about it. ... Then my router is plugged into the phone company gadget, ... two computers are plugged into the router. ... and phone company adapter, ...
    (comp.dcom.telecom)
  • Re: Weird IP address picked using DHCP
    ... I am pleased with our Buffalo, ... Rebooting the router did not help. ... installing the same adapter on a different pc at the same ... router problem given that my Dad's laptop connects without any ...
    (alt.internet.wireless)