Re: Router problems

And...

Publish Web site on SBS 2003
http://groups.google.com/group/microsoft.public.windows.server.sbs/browse_thread/thread/182fb799567654ad/c6d16e97dfe80e87?lnk=st&q=use+sbs+to+host+web+site&rnum=6&hl=en#c6d16e97dfe80e87

--
Merv Porter [SBS MVP]
===================================
"Merv Porter [SBS-MVP]" <mwport@xxxxxxxxxxxxxxxxxxx> wrote in message
news:e6edYoRJGHA.208@xxxxxxxxxxxxxxxxxxxxxxx
> Is this "companyweb" (your intranet) that you're trying to publish to the
> web or is it your company's web site?
> Which flavor of ISA are you running: 2000 or 2004?
>
> More info about publsihing web sites...
> http://groups.google.com/group/microsoft.public.windows.server.sbs/browse_thread/thread/64257c427f893935/2a469c9b49824da5?lnk=st&q=sbs+2003+web+server+publish+web+site&rnum=2&hl=en#2a469c9b49824da5
>
> And
> http://groups.google.com/group/microsoft.public.windows.server.sbs/browse_thread/thread/6168532ad5ed7032/83e7bbd40c58142e?lnk=st&q=sbs+2003+web+server+publish+web+site&rnum=3&hl=en#83e7bbd40c58142e
>
> --
> Merv Porter [SBS MVP]
> ===================================
> "steve tysinger" <stevetysinger@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
> message news:F9392105-2EE3-4454-85A6-95BDAAD775DB@xxxxxxxxxxxxxxxx
>>I tried your suggestions but still was not able to get the port forwarding
>>to
>> work. My webserver was inaccessable. Everything else worked.
>>
>> I tried to duplicate your scenario with the following exceptions;
>> my defaul router IP was 192.168.0.1 not 192.168.1.1
>> I assumed this wouldn't be a problem so I left it default.
>>
>> In turn, my extrernal nic IP was 192.168.0.2 and similarly the gateway
>> for
>> it was 192.168.0.1
>>
>> my address pool in DHCP is 192.168.16.1 (not .0) to 192.168.16.254
>>
>> Everything else in your diagram was the same as my setup.
>>
>> I forwareded port 80 to my external nic, 192.168.0.2
>>
>> My connection was shared, I could acces the web directly by plugging into
>> the router, but no one could access my webserver.
>>
>> I re ran ICW twice. Once using a direct broadband connection, then using
>> an
>> internal router. Neither of those fixed the problem.
>>
>> I have spent two afternoons on this so far. Just to let you know, I've
>> made
>> a serious attempt.
>>
>> Thanks for all your help.
>>
>> BTW, my modem is a router type but it is set to bypass the router feature
>> and just deliver the static IP. My IP TW road runner, has told me this
>> recently.
>> "Merv Porter [SBS-MVP]" wrote:
>>
>>> Set up the network (with router) per the diagram at:
>>> http://www.smallbizserver.net/Default.aspx?tabid=154
>>>
>>> Forward the required ports from your router to the IP address of your
>>> external NIC:
>>>
>>> Port 25 for Exchange
>>> Port 443 and 4125 for RWW
>>> Port 1723 for VPN (and set up router to pass GRE Protocol 47 for PPTP)
>>> Port 444 for publishing your intranet (companyweb)
>>> Port 80 (if you have a web server - a questionable approach with SBS)
>>> Port 3389 for TS (if you remotely administer the SBS with an RDC
>>> session)
>>>
>>> Then re-run CEICW.
>>>
>>> I assume you have a standard cable modem (just a modem and not a
>>> modem-router).
>>>
>>> Once you get this setup and working, the preferred approach is to add a
>>> WAP
>>> into the mix and connect it to a port on your router. This allows
>>> "visitors" to get direct wireless access to the Internet. They will not
>>> be
>>> within your SBS network, so ISA won't be an issue. They can just set
>>> their
>>> laptops to get an IP automatically (from the WAP) so that they can
>>> connect
>>> to the Web from anywhere in your building (within the limits of the
>>> WAP).
>>>
>>> Of course, you can also have the laptops use hard wires connected back
>>> to
>>> ports on the router, but this limits their mobility.
>>>
>>> --
>>> Merv Porter [SBS MVP]
>>> ===================================
>>> "steve tysinger" <stevetysinger@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
>>> message
>>> news:34C0F1E1-06E3-4913-956A-3CCFB4B86F6D@xxxxxxxxxxxxxxxx
>>> > Currently there is no router setup. I am having problems setting up
>>> > the
>>> > wired router. We have no "wireless" in the building. Everything is
>>> > wired.
>>> >
>>> > I am unable to setup the router and maintain access to our webserver.
>>> >
>>> > "Merv Porter [SBS-MVP]" wrote:
>>> >
>>> >> Hi Steve,
>>> >>
>>> >> Just a question...
>>> >>
>>> >> If these visitors are using laptops, why aren't plugging a WAP
>>> >> (Wireless
>>> >> Access Point) into your router and then having them use it for
>>> >> Internet
>>> >> Access.
>>> >>
>>> >> --
>>> >> Merv Porter [SBS MVP]
>>> >> ===================================
>>> >> "steve tysinger" <stevetysinger@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
>>> >> message
>>> >> news:3172B1D9-C688-4C81-A920-5F7A7FF754D9@xxxxxxxxxxxxxxxx
>>> >> >I have a SBS2003 running a web server in IIS. It's a Dell server
>>> >> >with
>>> >> >(2)
>>> >> > Nics. One nic goes out to my LAN the other connects to the
>>> >> > interenet
>>> >> > via
>>> >> > cable mode. The internet connection NIC is set to a static IP that
>>> >> > is
>>> >> > assigned by time warner road runner. All of this works well. I
>>> >> > share my
>>> >> > connection to my users via ISA and outside users can access my
>>> >> > website.
>>> >> >
>>> >> > Now I have a need to add a router between my cable modem and my
>>> >> > server.
>>> >> > I
>>> >> > have some visitors that require a direct connection to the
>>> >> > internet,
>>> >> > one
>>> >> > that
>>> >> > does not go through ISA or my lan.
>>> >> >
>>> >> > I can setup the router, assigning my static IP on the router and
>>> >> > the
>>> >> > internet connection is shared fine, but no one can access my
>>> >> > website.
>>> >> > So I
>>> >> > try to forward the HTTP on the router. When I attempt this the
>>> >> > router
>>> >> > tells
>>> >> > me that in order to forward a port it must be on the same subnet as
>>> >> > my
>>> >> > lan
>>> >> > IP.
>>> >> >
>>> >> > OK, So I need to change my router lan IP so that it is on my Local
>>> >> > Lan
>>> >> > IP.
>>> >> > Once I change it, I can no longer connect to it through the
>>> >> > interface,
>>> >> > nor
>>> >> > can i ping it. Even after a ipconfig release and renew.
>>> >> >
>>> >> > I'm thinking I need to do something in SBS so that it will search
>>> >> > across
>>> >> > that second nic for another LAN IP address.
>>> >> >
>>> >> > My server LAN NIC IP is 192.168.16.2
>>> >> > The default router IP is 192.168.0.1
>>> >> > Once I change the router IP to say 192.168.16.3 it is no longer
>>> >> > accessable.
>>> >> > Cant connect to it. 3-9 is reserved in my dhcp. so there is no
>>> >> > conflict.
>>> >>
>>> >>
>>> >>
>>>
>>>
>>>
>
>


.

Relevant Pages

  • Re: companyweb from RWW
    ... Les Connor [SBS Community Member - SBS MVP] ... "Could not open connection to the host, on port 23: ... internet should tell the tale, ... This site is the default web site. ...
    (microsoft.public.windows.server.sbs)
  • Re: moving sbs network
    ... The SBS network is connected to the LAN port. ... so the public wireless router is the DHCP ...
    (microsoft.public.windows.server.sbs)
  • Re: changed IP address: cant receive email & need to make domain name match IP address
    ... Port Forwarding for 2Wire 1701HG ... SBS CDs, but it's always a good idea to keep them handy. ... As you are set up now, your SBS server is "bare to the Internet" (not ... need to buy at least another inexpensive router to put between the SBS ...
    (microsoft.public.windows.server.sbs)
  • RE: router to router question...pls help
    ... that was done already all port are configured ... by the way i already have a full time router to router connection ... > I am glad to hear from you in the SBS newsgroup. ... > SBS 2003 to configure for the internet access and remote access. ...
    (microsoft.public.windows.server.sbs)
  • Re: outgoing mail is ok, incoming does not work
    ... >> Assuming you have installed ISA on the SBS, I would configure your router to ... >> pass all incomming requests to the SBS external nic IP. ... Had a quick look in the router ... Forward Port 25 to the servers external NIC address? ...
    (microsoft.public.windows.server.sbs)