Re: Router problems
Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance
In article <3172B1D9-C688-4C81-A920-5F7A7FF754D9@xxxxxxxxxxxxx>,
stevetysinger@xxxxxxxxxxxxxxxxxxxxxxxxx says...
> My server LAN NIC IP is 192.168.16.2
> The default router IP is 192.168.0.1
> Once I change the router IP to say 192.168.16.3 it is no longer accessable.
> Cant connect to it. 3-9 is reserved in my dhcp. so there is no conflict.
Steve:
Based on the above, you are setting your router's IP to be within the
subnet of the SBS *internal* (LAN) NIC. That's not what you want. You
want to set the router's IP to be within the subnet of the SBS
*external* (WAN) NIC, and connect the router between the cable modem and
the external NIC.
The router should have DHCP enabled, but exclude 10 or so addresses.
Your external SBS NIC address should be within the excluded range so it
can remain static.
Then, follow Merv's recommendations.
-- Owen Williams
.
Relevant Pages
- Re: 2 NIC SBS2003R2 LAN/WAN Firewall Router Connection Failure
... I have to admit to a preference for VMWare Server which can only be ... I've asked the other SBS MVP's to comment on the current status of SBS ... I connected directly to the router and changed its LAN side subnet ...
(microsoft.public.windows.server.sbs) - Re: 2 NIC SBS2003R2 LAN/WAN Firewall Router Connection Failure
... but I guess that's another topic for internet searching. ... I've asked the other SBS MVP's to comment on the current status of SBS ... I connected directly to the router and changed its LAN side subnet mask ...
(microsoft.public.windows.server.sbs) - Re: 2 NIC SBS2003R2 LAN/WAN Firewall Router Connection Failure
... I changed the SBS external IP settings as you suggest. ... Clients and the SBS Server can reach the router. ... may be there are some rule deny the access from some IP addresses or subnet. ... |> Two Nics, a static IP address, ISA, router ...
(microsoft.public.windows.server.sbs) - Re: 2 NIC SBS2003R2 LAN/WAN Firewall Router Connection Failure
... I've asked the other SBS MVP's to comment on the current status of SBS ... I connected directly to the router and changed its LAN side subnet mask ... |> Two Nics, a static IP address, ISA, router ...
(microsoft.public.windows.server.sbs) - Re: Networking Question - VLANs on SBS 2003 Premium SP1
... Ensure you connect the SBS external NIC to one LAN port of the router. ... On the Connection Type page, click Broadband, and then click Next. ... Internet access and the local network check box, ...
(microsoft.public.windows.server.sbs) |
|
