Re: IP Config with 2 NICs Wizard dont work, Static dont work!

In article <u$lccHhGGHA.1124@xxxxxxxxxxxxxxxxxxxx>, not@xxxxxxxxxxx
says...
> I suspect the OP has both NICs in the same subnet.

Me, too. The wording of the original post _suggested_ both NICs are on
192.168.1.x.

-- Owen Williams
.

Relevant Pages

  • Re: UpdatedConfirmation of NLB
    ... IP Subnet. ... It seems that you're intending the second NICs as the Heartbeat ... Configure Network Load Balancing (NLB) with Two Network Adapters ... Configure the NLB Cluster properties according to your parameters, ...
    (microsoft.public.windows.server.clustering)
  • Re: Problem using Remoting with 2 NICs
    ... I agree with you on the 2 NIC's with same subnet being a bad idea. ... Setting the http channels useIpAddress property to false on the server fixed ... I have clients connecting successfully on NIC 1, ... When both NICs are enabled. ...
    (microsoft.public.dotnet.framework.remoting)
  • Re: Third NIC
    ... Try the WAP on the switch that the SBS internal nic is connected to. ... the SBS really supports just the one subnet. ... If all 5 nics are physically in your SBS server you might as well only have one. ...
    (microsoft.public.windows.server.sbs)
  • Re: 2 NIC SBS2003R2 LAN/WAN Firewall Router Connection Failure
    ... router from internal client or SBS. ... Please contact your router vendor to check the settings in the router, ... may be there are some rule deny the access from some IP addresses or subnet. ... |> Two Nics, a static IP address, ISA, router ...
    (microsoft.public.windows.server.sbs)
  • Re: Free brain teaser - Networking ?
    ... The mask defines which bits in the IP address are used to define the subnet so both make it up. ... Make the mask 255.255.255.192 (for all NICs on that subnet, ... computer addresses and that's 6 bits for 64 on each subnet, minus the 0 and 63 numbers leaving 62 for actual computer and router addresses. ...
    (alt.comp.hardware.pc-homebuilt)
Loading