IP Config with 2 NICs Wizard dont work, Static dont work!

One NIC Is WAN the other is LAN

But SBS refuses to configure them with the wizard claim's network setup
error

Ive tried manual static IPs to no avail.

My setup is simple, I have a dedicated ADSL Ethernet modem with IP of
192.168.1.10
and a LAN router of 192.168.1.20

Both have DHCP disabled.

The SBS was clean, no errors, the only addition was the 2nd NIC.

Is there anyway to bypass SBS wizards? It seems from experimentation that
directly administering the NICs does not update the various WAN/LAN
application interfaces.... ie I can't browse the Web.

Why is the Internet Connection wizard in Server Management reporting a
Network Setup err in any event???

Are their logs for these wizards? Ive looked in the usual
systemmanagement/logs but cant see anything likely.


.

Relevant Pages

  • Re: Setting up SBS2003 prior to integration
    ... SBS is much happier when using 2 nics and letting it do all the serving, ... The wizard will setup everything for you ... which can only work fine with 2 nics. ... > Currently our Firewall acts as a router and DHCP server, ...
    (microsoft.public.windows.server.sbs)
  • Re: Connect to the Internet Wizard
    ... What version SBS? ... How many NICs? ... Is this a clean and new install, upgraded, or did you replace NIC hardware? ... If the wizard is just dying, my initial thought is that you may have some ...
    (microsoft.public.windows.server.sbs)
  • Re: DC Event Log says DC cannot find itself even though it can
    ... the wizard will configure the Server NICs correctly, ... If the wizard is going to pick 192.168.16.2 for the Internal NIC IP, ... change your SBS LAN NIC configuration. ... you don't have to make those manual configuration changes on your ...
    (microsoft.public.windows.server.sbs)
  • Re: DC Event Log says DC cannot find itself even though it can
    ... You shouldn't have to change anything on the router, as it will be port forwarding to your SBS external nic and we're not changing anything on the external. ... SBS will take care of setting up the 'basic firewall' aka RRAS which will route between the internal and external nics. ... If the wizard is going to pick 192.168.16.2 for the Internal NIC IP, ...
    (microsoft.public.windows.server.sbs)
  • Re: RWW ok intranet - doesnt work internet (SBS2003)
    ... Load won't be an issue with 2 NICs on the server. ... SBS Static WAN IP Network Setup ... SBS Dynamic WAN IP Network Setup ...
    (microsoft.public.windows.server.sbs)
Loading