Re: Port Forwarding in Windows SBS

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

I have now tried to enter info in to RARA to forward the correct ports.
However, when I refresh to restart to restart the NAT\Basic Firewall the
Server just hangs, saying please wait while the RARA is restarted.

ANy help?

Cheers,

James

JamesH wrote:
>Hi,
>
>It is Standard edition with 2 network cards. The broadband router passes all
>info to all ports. The internal machine has the gateway address for the SBS.
>
>James
>
>>>Hi,
>>>
>[quoted text clipped - 7 lines]
>>Firewalling on the internet device may be off, but does it pass traffic on
>>all ports to the SBS, or do you still have to configure it to do so?

--
Message posted via http://www.winserverkb.com
.

Relevant Pages

  • Re: [SLE] problem setting up samba on suse 9.3
    ... If I try to enable UDP/137,138 and TCP/139,445 ports in Yast's ... Firewall setup when the Samba server is enabled in the allowed ... If I disable Samba server from the allowed services ... After each time I've changed firewall settings I restart the ...
    (SuSE)
  • Re: Root exploit for FreeBSD
    ... for two ports to my FreeBSD portscluster nodes. ... and it gives the firewall ... US this is also quite common, at least with regards to University ... if your computer is going to connect on our network it must be configured in certain ways and behave "normally" or you won't get a connection. ...
    (freebsd-questions)
  • Re: Root exploit for FreeBSD
    ... for two ports to my FreeBSD portscluster nodes. ... and it gives the firewall ... US this is also quite common, at least with regards to University ... if your computer is going to connect on our network it must be configured in certain ways and behave "normally" or you won't get a connection. ...
    (freebsd-current)
  • Re: Trouble accessing Outlook Web Access from behind firewall
    ... When starting the firewall I also set ... > rejected and dropped packets are logged, however I see nothing in my log ... > # Higher ports needed to accept incoming/outgoing calls ...
    (comp.security.firewalls)
  • Re: iptables configuration
    ... >> that if a 'virus/trojan' initiated a connection to the net, the firewall ... >> would not protect the LAN. ... The LAN is NATed with private IPs to one public IP. ... the ports that are used by services running on linux. ...
    (comp.os.linux.security)