RE: Using Public IP address behind a Private DHCP Server

Dear Customer,

Thank you for posting back!

>From your description, I assume that you want to publish a NTP
server/device through ISA 2K Server. please refer to the following KB
article to configure the Simple Network Time Protocol (SNTP) with an
authoritative time server on a Windows 2000-based domain controller that is
running Internet Security and Acceleration (ISA) Server.

323621 HOW TO: Configure the Simple Network Time Protocol (SNTP) on ISA
Server
http://support.microsoft.com/?id=323621

I also have found following information for you, please see:

295667 How to Allow Third-Party Internet Application Connections Through ISA
http://support.microsoft.com/?id=295667

For the requirement regarding ADP software, I suggest that you need to
contact ADP vendor for professional support.

Thanks a lot for your time and understanding!

Best regards,

Brandy Nee

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security
======================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.
======================================================
This posting is provided "AS IS" with no warranties, and confers no rights.



--------------------
>Thread-Topic: Using Public IP address behind a Private DHCP Server
>thread-index: AcXwZyGwBgRjAXoETT2vCtQPEGD1mQ==
>X-WBNR-Posting-Host: 68.251.149.96
>From: "=?Utf-8?B?Uy5XLg==?=" <SW@xxxxxxxxxxxxxxxxxxxxxxxxx>
>References: <BB63786E-EE88-4493-9DB7-F9BE0AAB551B@xxxxxxxxxxxxx>
<jiZ0DPA8FHA.2612@xxxxxxxxxxxxxxxxxxxxx>
>Subject: RE: Using Public IP address behind a Private DHCP Server
>Date: Wed, 23 Nov 2005 11:50:18 -0800
>Lines: 134
>Message-ID: <75F8E168-A330-4B23-8858-2B19DB67F233@xxxxxxxxxxxxx>
>MIME-Version: 1.0
>Content-Type: text/plain;
> charset="Utf-8"
>Content-Transfer-Encoding: 7bit
>X-Newsreader: Microsoft CDO for Windows 2000
>Content-Class: urn:content-classes:message
>Importance: normal
>Priority: normal
>X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
>Newsgroups: microsoft.public.windows.server.sbs
>NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.2.250
>Path: TK2MSFTNGXA02.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGXA03.phx.gbl
>Xref: TK2MSFTNGXA02.phx.gbl microsoft.public.windows.server.sbs:225071
>X-Tomcat-NG: microsoft.public.windows.server.sbs
>
>When I was discussing PINGING the clock I smply meant that on my local
>network, if I assign a private IP address i.e. 192.168.0.X I can get the
>clock to reply no problem. However, simply assigning public IP address
>information via its LED interface I cannot get the clock to repsong either
>inside of my network or outside the network.
>
>I admit my dunceness in this area :(
>

.

Relevant Pages

  • Re: IIS web config
    ... The 1 IP 1 Port listener is by design on ISA Server. ... 'Microsoft Firewall' service. ... Microsoft CSS Online Newsgroup Support ...
    (microsoft.public.windows.server.sbs)
  • RE: sloww web browsing
    ... and ISA 2004, the internet access became slower than it used to be. ... Open the ISA Server management console, ... Click Start, point to Programs, point to Microsoft ISA server, and then ... will you be able to access the internet from the internal client ...
    (microsoft.public.windows.server.sbs)
  • RE: ISA 2004 SP1 - Microsoft Firewall service not starting
    ... Then open the ISA management console, right click Cache and select Disable ... How to delete the Web cache in Internet Security and Acceleration Server ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ...
    (microsoft.public.windows.server.sbs)
  • RE: Sercond ISA on SBS Member Server
    ... ISA on a SBS member server. ... Without a good backup, it's difficult to have the server ... - This is often used for ISA server configuration recovery. ...
    (microsoft.public.windows.server.sbs)
  • RE: Internet Usage Reports
    ... There is no other application on the SBS server box that can monitor ... internet activities as your needs rather than ISA server. ... Microsoft Internet Security and Acceleration Server 2004 is the ... Microsoft is providing this information as a convenience to you. ...
    (microsoft.public.windows.server.sbs)