Re: Device\Scsi\mraid35x1

The controller sounds like it's an LSI Megaraid controller. The driver
you're using is the latest version available from LSI. If Intel doesn't
offer the management software, you could try installing Powerconsole from
LSI's website. Powerconsole can display the controller's log files which may
contain additional info. I had a drive on an LSI Raid controller that kept
going offline occasionally. LSI tech support recommended replacing the scsi
cable, and that eliminated the problem.
Paul Shapiro

"Kim Webb" <kimwebb@xxxxxxxxx> wrote in message
news:1132579566.989115.277740@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> Well last night/early this morning we had the same issue witht he
> server going offline. In the event log this same error is listed
>
> This one at 11/20/05 at 9:50pm
>
> The device, \Device\Scsi\mraid35x1, did not respond within the timeout
> period.
>
> Then the same error another 50 plus times every minute until I came in
> and rebooted the server becuase it would not respond.
>
>>> snip <<<
>
> I check the mraid35x1 sevice and it is an:
>
> Intel RAID Controller SRCS16
> PCI Slot 3
> Driver 8/2/04 6.45.2.32
>
> I downloaded the driver from intel and this is the latest one I can
> find.
>
> Under the RAID controller is:
>
> Megaraid LD 0 Megaraid SCSI Disk Sevice
> RAID Virtual Device
>
> My SYS and DATA devices where all my data is kept.
>
> I have 4 western digital 1600sd srives and one 2500sd drive.
>
> I'm not sure how to find this info out:
>
> raid type
> interface type - SCSI??
> rotational speed - Western Digital RE WD1600SD 160GB SATA Hard Drive,
> 7200RPM
> partitioning and amount of free space as a percentage-SYS is 39gb with
> 22.5 free, data is 258gb with 100gb free..


.

Relevant Pages