RE: Changing external IP address
- From: v-crinal@xxxxxxxxxxxxxxxxxxxx ("Crina Li")
- Date: Mon, 10 Oct 2005 03:20:32 GMT
Hi Paul,
Thank you for posting in SBS newsgroup.
>From the description, I understand you need to change the external IP
address and want to know if you can do as you mentioned. If I have
misunderstood your concerns, please do not hesitate to let me know.
To make sure the situation, would you please help me confirm the network
diagram is as following?
Internal network----SBS 2000---router---internet
If so, you should do as you have mentioned. You said "There are a lot of
custom filters I have applied to the SBS2000", do you mean you have
configured filters on ISA? If so, it should work after you rerunning ICW.
If you found some filters do not work again, you may need to reconfigure
them.
Hope the information help and I look forward to your reply.
Best regards,
Crina Li (MSFT)
Microsoft CSS Online Newsgroup Support
Get Secure! - www.microsoft.com/security
=====================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.
Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.
For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.
Any input or comments in this thread are highly appreciated.
=====================================================
This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
| From: "Paul Burrows" <paul.burrows@xxxxxxxxxxxx>
| Subject: Changing external IP address
| Date: Sat, 8 Oct 2005 14:27:27 +1300
| Newsgroups: microsoft.public.windows.server.sbs
||
| I have been requested to change the ip address of the external NIC from
| 192.168.0.2 to 10.1.1.2 on a SBS2000 machine that has been in service for
a
| couple of years.
|
| There are a lot of custom filters I have applied to the SBS2000
|
| Am I being too optimistic in thinking that all I have to do is :
| 1. Configure the Cisco router to accept external traffic and send it out
| from 10.1.1.1 to 10.1.1.2 instead of 192.168.0.2
| 2. Configure the external nic on SBS2000 to 10.1.1.2
| 3. Rerun the Internet Configuration Wizard and select to leave existing
| filters/setting alone when I get to that point.
|
| Thanks
| Paul
|
|
|
|
.
- References:
- Changing external IP address
- From: Paul Burrows
- Changing external IP address
- Prev by Date: RE: Error ID: 9548
- Next by Date: RE: Outbound VPN to remote Netscreen fails
- Previous by thread: Changing external IP address
- Next by thread: Reinitialize Client Setup after Swing Migration from SBS 2000
- Index(es):
Relevant Pages
|
Loading