Strange problem with opening a network place could be ISA 2004 or XP SP2 Problem

We cannot open (or create anew) network place on a remote server which we
usually do by opening a VPN to the remote server and then using the network
place wizard.
We are behind an SBS 2003 server with SP1 and ISA 2004 the remote server is
SBS 2000 and has Linux based firewall on a separate PC.
We make the VPN connection to the Linux firewall PC from which we can the
remote desktop into the server. When instead of the remote desktop we try to
open a share using the network place wizard (\\servername or IP\share name)
we get a failure that we might not have correct permissions and when we try
to create a new network place we get a failure that the share name is
invalid. On the PC from which we are trying to do this (which is XP SP2
with the ISA 2004 client installed) we get the following event log errors in
the system log.
Event Type: Warning
Event Source: Tcpip
Event Category: None
Event ID: 4226
Date: 20/09/2005
Time: 12:34:40
User: N/A
Computer: xxxxxx
Description:
TCP/IP has reached the security limit imposed on the number of concurrent
TCP connect attempts.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 01 00 54 00 ......T.
0008: 00 00 00 00 82 10 00 80 ....?..?
0010: 01 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........

Event Type: Warning
Event Source: LSASRV
Event Category: SPNEGO (Negotiator)
Event ID: 40961
Date: 20/09/2005
Time: 12:18:43
User: N/A
Computer: xxxxxx
Description:
The Security System could not establish a secured connection with the server
cifs/servername. No authentication protocol was available.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

And sometimes
Event Type: Warning
Event Source: Kerberos
Event Category: None
Event ID: 14
Date: 20/09/2005
Time: 12:12:30
User: N/A
Computer: xxxxxx
Description:
There were password errors using the Credential Manager. To remedy, launch
the Stored User Names and Passwords control panel applet, and reenter the
password for the credential Domain\UserName.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 64 00 00 c0 d..À

Re-entering the password makes no difference and technet is threadbare on
these errors.
Any help would be greatly appraeciated.
Theo



.

Relevant Pages

  • Re: Laptop losing mapped drives at home
    ... Can she ping the remote server by name? ... Networking, Internet, Routing, VPN Troubleshooting on ... How to Setup Windows, Network, VPN & Remote Access on ...
    (microsoft.public.windowsxp.work_remotely)
  • VPN Connection Cant get past password.
    ... I have successfully used a VPN connection for a number of years mapped to a ... shared drive on a remote server. ... I now need to map to another drive on the network. ... When I re-enter the same logon/password as I use to get to the server it ...
    (microsoft.public.windowsxp.network_web)
  • Re: E-petition
    ... To obtain an independent "typical" rate, you'd need the test company ... customers of each ISP and using their own kit to test download speeds ... vs their own specially installed server inside that ISP's network. ... cable between the ISP and that remote server. ...
    (uk.telecom.broadband)
  • Re: vpn get in, but cant see anything
    ... Local Desktop 192.168.1.38 ... Remote Server 192.168.1.2 ... Ex of Proper Config: ... which network to pass ...
    (microsoft.public.win2000.ras_routing)
  • Re: [SLE] Connecting a tremial program to an external rs323 port
    ... The main remote server box is on the network... ... When the network backbone is down for some reason... ... you can connect the modem directly to the supervised ...
    (SuSE)