RE: SBS2K3 Premium - SP1 Issues, Fax Issues
- From: Eddie Schenk <EddieSchenk@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Tue, 20 Sep 2005 04:14:03 -0700
Hi Crina,
I haave sent the log files you requested via email as there a quite a lot of
them and it would be messy to post them here, as to your questions please
find the anwsers below:
1) Yes, I have installed the Service Packs in the order they are supplied on
the three CDs, I did not apply the Exchange one as I had already installed
that, should I have re-installed it?
2) I got the message the SBS2K3 SP1 had installed and required a re-boot
only after the installation filed half way through and asked that I look at
the log file and reapir whatever was causing the problem, but the elog file
did not say that anythinig had failed. After closing the log file the
Finished Box appeared and the machine was re-booted.
Having said all that, the SBS SP1 was in a loop asa per my first posting
which I had to kill off after the 6th loop and thtere is the issue after the
Windows 2003 SP1 was installed saying that the normala configuration could
not be used and that a previous one would be used instead.
3) The machine reports that the SBS SP1 is installed under My Computer.
The only indication so far that all is not as expected is that the fax to
email is not working and it reports that the DLLs are invalid. But I ama not
happy thata the SBS SP1 in the first instant looped and then failed half way
through and then appeared to complete, plus the error on the Windows 2003 SP1
install.
I have seen another post in this Forum that made the recomendation that the
SP be removed and then installed again, I will be back ono the Customer's
site this Thursday and I would like to know how best to procede, perhaps the
log files will give you some extra clues?
Cheers
Eddie Schenk
""Crina Li"" wrote:
> Hi Eddie,
>
> Thank you for posting in SBS newsgroup.
>
> Before we install the SBS 2003 SP1 onto the server, we need to make sure
> that the required components such as Windows server 2003 SP1, Exchange 2003
> SP1, WSS SP1 have been installed. Please refer to the release note and
> double check the install procedure:
> http://www.microsoft.com/downloads/details.aspx?FamilyId=022677CC-F5AC-4BFB-
> 9AD0-454E89CB98BB&displaylang=en
>
> Would you please help me confirm if you have strictly followed the document
> to install SBS SP1?
>
> For SBS 2003 Premium:
> http://download.microsoft.com/download/2/e/9/2e902d14-da2e-43ba-8bd6-6d258f5
> 356b6/SP1Setup_prem.htm
>
> More reference:
> http://www.smallbizserver.net/Default.aspx?tabid=236
>
> If the problem persists, please help to gather the following information to
> isolate the problem:
>
> 1. Do you have received the prompt box which indicated the operation has
> been finished successfully?
> 2. Do you see "Microsoft Windows Server 2003 for Small Business Server
> Service Pack 1" when you view properties of My Computer?
> 3. Also, please paste all the content of log in the following folders to
> the Newsgroup. If the file is too large, you can zip it and send it to my
> mailbox: v-crinal@xxxxxxxxxxxxxx I need the whole content in the folder for
> research.
>
> Windows Small Business Server 2003 SP1 (Q885918):
> C:\Windows\KB885918.log
> Remainder of the Small Business Server Setup Logs: C:\Program
> Files\Microsoft Integration\Windows Small Business Server 2003\Logs
>
> I am appreciated your time and cooperation. If anything is unclear, please
> feel free to let me know. I am looking forward to hearing from you!
>
> Best regards,
>
> Crina Li (MSFT)
>
> Microsoft CSS Online Newsgroup Support
>
> Get Secure! - www.microsoft.com/security
>
> =====================================================
> This newsgroup only focuses on SBS technical issues. If you have issues
> regarding other Microsoft products, you'd better post in the corresponding
> newsgroups so that they can be resolved in an efficient and timely manner.
> You can locate the newsgroup here:
> http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
>
> When opening a new thread via the web interface, we recommend you check the
> "Notify me of replies" box to receive e-mail notifications when there are
> any updates in your thread. When responding to posts via your newsreader,
> please "Reply to Group" so that others may learn and benefit from your
> issue.
>
> Microsoft engineers can only focus on one issue per thread. Although we
> provide other information for your reference, we recommend you post
> different incidents in different threads to keep the thread clean. In doing
> so, it will ensure your issues are resolved in a timely manner.
>
> For urgent issues, you may want to contact Microsoft CSS directly. Please
> check http://support.microsoft.com for regional support phone numbers.
>
> Any input or comments in this thread are highly appreciated.
>
> =====================================================
>
> This posting is provided "AS IS" with no warranties, and confers no rights.
> --------------------
> | Thread-Topic: SBS2K3 Premium - SP1 Issues, Fax Issues
> | t| From: =?Utf-8?B?RWRkaWUgU2NoZW5r?=
> <EddieSchenk@xxxxxxxxxxxxxxxxxxxxxxxxx>
> | Subject: SBS2K3 Premium - SP1 Issues, Fax Issues
> | Date: Mon, 19 Sep 2005 11:43:04 -0700
> | | Newsgroups: microsoft.public.windows.server.sbs
> ||
> | Folks,
> |
> | I obtained the SP1 disk set from MS and haave installed them today with
> the
> | exception of the ISA upgrade, a few issues cropped up along the way which
> I
> | hope some kind soul can shead some light on.
> |
> | 1) The Fax server no longer sends the recieved faxes to the designated
> | address, if I try and send it manually from the Fax console it give me an
> | invalid DLL error.
> |
> | 2) After installing the Windows 2003 SP1 and re-booting I got a weird
> error
> | message stating that the current windowns configuration could not be
> loaded
> | and that a previous version would be used instead.
> |
> | 3) After the XP SP2 install (which went fine) I tried to install the
> SBS2K3
> | SP1 and this kept looping (6 times before I killed it off), I then
> re-booted
> | and found the "Continue setup" icon on the desktop, I tried to install
> it
> | again and it failed half way through and asked if I wanted to check the
> log
> | file, I did this and the log files did not show any error. After this
> the
> | finished box appeared and I re-booted, the "continue setup" icon has
> | disapeared. Dispite two more attempts to install this SP the same thing
> | happened each time. Add/Remove programs confirmed that the SP had been
> | installed.
> |
> | Has anyone else come accross this? I am thinking the best way to procede
> | would be to un-install all the service packs and start again? I did not
> | install the Exchange SP1 as I had already installed this previously. This
> | server also has SQL2K installed with SP4 and CRM 1.2
> | --
> | Cheers
> |
> | Eddie Schenk
> |
>
>
.
- Prev by Date: Re: anyone running 'Kodak Dental imaging'
- Next by Date: UPS Installation
- Previous by thread: Non local domain: You do not have permission to send to this recipient
- Next by thread: RE: SBS2K3 Premium - SP1 Issues, Fax Issues
- Index(es):
Relevant Pages
|
