Re: No incoming SMTP mail

I see an MX record for that domain.

Check your relay rules though.

Run the connect to internet wizard again, and see if that solves anything.

Matt Gibson - GSEC

"kj" <kj@xxxxxxxxxxx> wrote in message
news:eByWx4FsFHA.528@xxxxxxxxxxxxxxxxxxxxxxx
> Doesn't appear to be an MX record for "gtnconsulting.com". If that's the
> domain you are expecting to get mail on, then you need to add one.
>
> --
> /kj
> "Attila" <$acsokai$@nosmap.andrew.cmu.edu> wrote in message
> news:O8YWa9$rFHA.3732@xxxxxxxxxxxxxxxxxxxxxxx
>> Thanks for the help Matt,
>>
>> 1. Yes, have run the wizard.
>> 2. Yes, I can telnet to port 25, at least I think I can, when I do, I
>> get:
>> 220 gtnconsulting.com Microsoft ESMTP MAIL Service, Version:
>> 6.0.3790.211 ready at Fri, 2 Sep 2005 16:43:11 -0400
>> 3. I am sending mail out using a smarthost at DynDns.org as I always
>> have. Sending is not a problem to the external world, but mail is just
>> not coming in.
>>
>> "Matt Gibson" <mattg@xxxxxxxxxxxxxxx> wrote in message
>> news:e3xgXx$rFHA.3264@xxxxxxxxxxxxxxxxxxxxxxx
>>> 1) Have you run the "Connect To Internet" Wizard?
>>>
>>> 2) Can you Telnet to port 25 from outside your SBS network?
>>>
>>> 3) Are you sending mail through your ISP's smarthost, or through DNS
>>> (Looks like DNS...try Smarthost)
>>>
>>> Matt Gibson - GSEC
>>>
>>> "Attila" <$acsokai$@nosmap.andrew.cmu.edu> wrote in message
>>> news:uqh5mP9rFHA.1996@xxxxxxxxxxxxxxxxxxxxxxx
>>>>I built a new server with the same domain name as the old one. This new
>>>>SBS 2003 server has ISA 2000 running. Everything but receiving mail
>>>>works. I used dynamic dns, with Direct Update, and I Can access the
>>>>server remotely with RWW or with RDC and pull up the OWA page as well.
>>>>Sending is not a problem, but after 72 hours, I get this delayed message
>>>>notification below.
>>>> I have port 25 on my router set to forward to my server's external IP
>>>> of 192.168.0.5. Please see my IPCONFIG below as well.
>>>>
>>>> Any ideas?
>>>>
>>>> Delay Message Notification:
>>>> The address to which the message has not yet been delivered is:
>>>> acsokai@xxxxxxxxxxxxxxxxx
>>>> Delay reason: SMTP error from remote mail server after MAIL
>>>> FROM:<gcsokai@xxxxxxxxx> SIZE=2692:
>>>> host mail.gtnconsulting.com [68.162.166.196]:
>>>> 454 5.7.3 Client does not have permission to submit mail to this
>>>> server.
>>>>
>>>> My IPCONFIG:
>>>>
>>>> Windows IP Configuration
>>>> Host Name . . . . . . . . . . . . : sbsmsg
>>>> Primary Dns Suffix . . . . . . . : GTNConsulting.local
>>>> Node Type . . . . . . . . . . . . : Hybrid
>>>> IP Routing Enabled. . . . . . . . : Yes
>>>> WINS Proxy Enabled. . . . . . . . : No
>>>> DNS Suffix Search List. . . . . . : GTNConsulting.local
>>>>
>>>> Ethernet adapter Intranet: (Internal)
>>>> Connection-specific DNS Suffix . :
>>>> Description . . . . . . . . . . . : 3Com 3C905TX-based Ethernet
>>>> Adapter (Generic)
>>>> Physical Address. . . . . . . . . : 00-50-05-32-D7-7F
>>>> DHCP Enabled. . . . . . . . . . . : No
>>>> IP Address. . . . . . . . . . . . : 192.168.1.10
>>>> Subnet Mask . . . . . . . . . . . : 255.255.255.0
>>>> Default Gateway . . . . . . . . . :
>>>> DNS Servers . . . . . . . . . . . : 192.168.1.10
>>>> Primary WINS Server . . . . . . . : 192.168.0.11
>>>>
>>>> Ethernet adapter INTERNET: (External)
>>>> Connection-specific DNS Suffix . :
>>>> Description . . . . . . . . . . . : Broadcom NetXtreme 5751 Gigabit
>>>> Controller
>>>> Physical Address. . . . . . . . . : 00-11-11-71-35-64
>>>> DHCP Enabled. . . . . . . . . . . : No
>>>> IP Address. . . . . . . . . . . . : 192.168.0.5
>>>> Subnet Mask . . . . . . . . . . . : 255.255.255.0
>>>> Default Gateway . . . . . . . . . : 192.168.0.1
>>>> DNS Servers . . . . . . . . . . . : 192.168.1.10
>>>> Primary WINS Server . . . . . . . : 192.168.0.11
>>>> NetBIOS over Tcpip. . . . . . . . : Disabled
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>


.

Relevant Pages

  • Re: Accessing OWA remotely
    ... Could you please guide me on how to enable this port on the SBS 2003. ... Yes i did run the connect to the internet wizard. ... >> Matt Gibson - GSEC ...
    (microsoft.public.windows.server.sbs)
  • Re: Default email address for contact
    ... yeah I was aware of that before - that doesn't really solve the problem ... pick from the list" dialogue in OE6 (I don't use any ... >> when sending mail. ...
    (microsoft.public.windows.inetexplorer.ie6_outlookexpress)
  • Re: Default email address for contact
    ... "matt" wrote in message ... pick from the list" dialogue in OE6 (I don't use any ... >>> wanted to use for that contact, when I hit send (because the ... >>> when sending mail. ...
    (microsoft.public.windows.inetexplorer.ie6_outlookexpress)
  • Re: Default email address for contact
    ... "matt" wrote in message ... > wanted to use for that contact, when I hit send (because the ... > to the first entry in the list, meaning I can easily send it to the ... > when sending mail. ...
    (microsoft.public.windows.inetexplorer.ie6_outlookexpress)
  • Re: POP3 Connector sending to distribution group
    ... I haven't tried this so I don't know for sure it works but when sending mail ... there is options button on menu with button for send replies to box. ... "Matt M" wrote in message ... > to a distribution group. ...
    (microsoft.public.windows.server.sbs)