Re: No incoming SMTP mail

Thanks for the help Matt,

1. Yes, have run the wizard.
2. Yes, I can telnet to port 25, at least I think I can, when I do, I get:
220 gtnconsulting.com Microsoft ESMTP MAIL Service, Version:
6.0.3790.211 ready at Fri, 2 Sep 2005 16:43:11 -0400
3. I am sending mail out using a smarthost at DynDns.org as I always have.
Sending is not a problem to the external world, but mail is just not coming
in.

"Matt Gibson" <mattg@xxxxxxxxxxxxxxx> wrote in message
news:e3xgXx$rFHA.3264@xxxxxxxxxxxxxxxxxxxxxxx
> 1) Have you run the "Connect To Internet" Wizard?
>
> 2) Can you Telnet to port 25 from outside your SBS network?
>
> 3) Are you sending mail through your ISP's smarthost, or through DNS
> (Looks like DNS...try Smarthost)
>
> Matt Gibson - GSEC
>
> "Attila" <$acsokai$@nosmap.andrew.cmu.edu> wrote in message
> news:uqh5mP9rFHA.1996@xxxxxxxxxxxxxxxxxxxxxxx
>>I built a new server with the same domain name as the old one. This new
>>SBS 2003 server has ISA 2000 running. Everything but receiving mail works.
>>I used dynamic dns, with Direct Update, and I Can access the server
>>remotely with RWW or with RDC and pull up the OWA page as well. Sending is
>>not a problem, but after 72 hours, I get this delayed message notification
>>below.
>> I have port 25 on my router set to forward to my server's external IP of
>> 192.168.0.5. Please see my IPCONFIG below as well.
>>
>> Any ideas?
>>
>> Delay Message Notification:
>> The address to which the message has not yet been delivered is:
>> acsokai@xxxxxxxxxxxxxxxxx
>> Delay reason: SMTP error from remote mail server after MAIL
>> FROM:<gcsokai@xxxxxxxxx> SIZE=2692:
>> host mail.gtnconsulting.com [68.162.166.196]:
>> 454 5.7.3 Client does not have permission to submit mail to this server.
>>
>> My IPCONFIG:
>>
>> Windows IP Configuration
>> Host Name . . . . . . . . . . . . : sbsmsg
>> Primary Dns Suffix . . . . . . . : GTNConsulting.local
>> Node Type . . . . . . . . . . . . : Hybrid
>> IP Routing Enabled. . . . . . . . : Yes
>> WINS Proxy Enabled. . . . . . . . : No
>> DNS Suffix Search List. . . . . . : GTNConsulting.local
>>
>> Ethernet adapter Intranet: (Internal)
>> Connection-specific DNS Suffix . :
>> Description . . . . . . . . . . . : 3Com 3C905TX-based Ethernet Adapter
>> (Generic)
>> Physical Address. . . . . . . . . : 00-50-05-32-D7-7F
>> DHCP Enabled. . . . . . . . . . . : No
>> IP Address. . . . . . . . . . . . : 192.168.1.10
>> Subnet Mask . . . . . . . . . . . : 255.255.255.0
>> Default Gateway . . . . . . . . . :
>> DNS Servers . . . . . . . . . . . : 192.168.1.10
>> Primary WINS Server . . . . . . . : 192.168.0.11
>>
>> Ethernet adapter INTERNET: (External)
>> Connection-specific DNS Suffix . :
>> Description . . . . . . . . . . . : Broadcom NetXtreme 5751 Gigabit
>> Controller
>> Physical Address. . . . . . . . . : 00-11-11-71-35-64
>> DHCP Enabled. . . . . . . . . . . : No
>> IP Address. . . . . . . . . . . . : 192.168.0.5
>> Subnet Mask . . . . . . . . . . . : 255.255.255.0
>> Default Gateway . . . . . . . . . : 192.168.0.1
>> DNS Servers . . . . . . . . . . . : 192.168.1.10
>> Primary WINS Server . . . . . . . : 192.168.0.11
>> NetBIOS over Tcpip. . . . . . . . : Disabled
>>
>>
>>
>>
>
>


.

Relevant Pages

  • Re: IIS and SBS 2003
    ... I have a new sbs2003 install and if I telnet to localhost ... port 80, and type hhh and hit enter it returns a HTTP/1.1 400 Bad ... "broken" sbs server, it connects but then dumps me. ... If I http to localhost, companyweb or anything I get Cannot Find ...
    (microsoft.public.windows.server.sbs)
  • Re: Suggestion for a lexical (login mode via TCPIP)
    ... Not sure of it is the right one to modify or to add another one, but it would be useful to be able to get information on whether the user us coming in via FTP, TELNET, etc. ... This would also allow a LOGIN.COM to check if someone is coming in through a secure/SSL port for instance. ... For the HP SSH server, it seems to be undefined. ... forget about the possibility of virtual terminals. ...
    (comp.os.vms)
  • Re: RDP access to SBS 2003 - HELP please
    ... Might I add that 'out of the box', when I first got the server it worked ... of it to the telnet prompt and quit. ... Try the remote desktop connection to see if it works. ... the effect that it can't connect to xxx.xxx.xxx.xxx port 23. ...
    (microsoft.public.windows.server.sbs)
  • Re: IP Blocker in SBS2003 exchange
    ... > What I was trying to explain in the telnet section was that I realise ... > the server is listening for connections on ports 110 and 25. ... > but he can connect to port 110. ... > well as another wireless broadband connection. ...
    (microsoft.public.windows.server.sbs)
  • Re: User access form remote Site ove managed VPN
    ... I think you have the syntax wrong in your telnet command. ... If you try and use a colon, it defaults to port 23 which is why you got ... the basic directions for implementing a terminal server on SBS2003 domain. ... managed VPN link between remote sites and headoffice. ...
    (microsoft.public.windows.terminal_services)