RE: microsoft fax e-mail routing of incoming faxes

Thank you for your reply:

But I have been using the SBS wizards to change the users and all the
permisions and properties are correct. I have not changed any of the systems
setting since the server was setup. I was just resently that, any change to
the original users or any new users can not get fax notification of the
recieved faxes and now I am getting new users cannot get the notification of
the sent mail. Same error different problem.

All the steps you talked about, I have done over and over. I appears to be
that exchange is blocking fax mail for the internal network. And it appears
to have happened after one of the security update or service packs.

Andy

""Brandy Nee [MSFT]"" wrote:

> Hello Aturano,
>
> Thank you for posting to the SBS Newsgroup.
>
> I understand you could not route your incoming fax through email, and you
> receive 32083&32089 event errors in the event logs. If I have misunderstood
> your issue, please let me know.
>
> Generally, we use Configure Fax wizard to set the incoming fax routing
> method. I suggest you to re-run the Configure Fax wizard (Server
> Management\Standard Management\Fax (Local)) and set the correct routing
> method.
>
> If the problem could not be resolved, I suggest you to check the following
> things.
>
> Please open the properties page of Fax container in the Server Management
> and go to "receipts tab",
>
> 1. Go to Server Management\Standard Management\Fax (Local), right click Fax
> (Local)), go to Properties. Receipts tab.
>
> 2. Please make sure that "Enable Message Boxes as receipts" is checked.
>
> 3. Please make sure that "Enable SMTP Receipts e-mail receipts delivery" is
> checked.
>
> 4. "From e-mail address" box should be listed as
> SBSFaxService@xxxxxxxxxxxxxxxxxxx If it is
> administrator@xxxxxxxxxxxxxxxxxxxx, please modify it.
>
> 5. Click the Authentication, the authentication method should be
> ''Anonymous access''. If it is set to '' Integrated Windows'', please
> modify it.
>
> 6. After above settings, please restart the Fax service in the service
> console (services.msc) and test your issue again, and check whether this
> issue occurs.
>
> If the problem persists, please collect the full content of the Event Logs
> in the Event Viewer. To do so, please see:
>
> On the server, run "eventvwr" (without quotation marks), check whether
> there is any error, if yes, double click it, click the Copy button and
> paste the full content to the Newsgroup.
>
> I am appreciated your time and cooperation, and am looking forward to your
> reply!
>
> Best regards,
>
> Brandy Nee
>
> Microsoft CSS Online Newsgroup Support
>
> Get Secure! - www.microsoft.com/security
> ======================================================
> This newsgroup only focuses on SBS technical issues. If you have issues
> regarding other Microsoft products, you'd better post in the corresponding
> newsgroups so that they can be resolved in an efficient and timely manner.
> You can locate the newsgroup here:
> http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
>
> When opening a new thread via the web interface, we recommend you check the
> "Notify me of replies" box to receive e-mail notifications when there are
> any updates in your thread. When responding to posts via your newsreader,
> please "Reply to Group" so that others may learn and benefit from your
> issue.
>
> Microsoft engineers can only focus on one issue per thread. Although we
> provide other information for your reference, we recommend you post
> different incidents in different threads to keep the thread clean. In doing
> so, it will ensure your issues are resolved in a timely manner.
>
> For urgent issues, you may want to contact Microsoft CSS directly. Please
> check http://support.microsoft.com for regional support phone numbers.
>
> Any input or comments in this thread are highly appreciated.
> ======================================================
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
>
>
> --------------------
> >Thread-Topic: microsoft fax e-mail routing of incoming faxes
> >thread-index: AcWk4WXw+PGfwFhJTtO77+LhBAPKMg==
> >X-WBNR-Posting-Host: 66.6.72.186
> >From: "=?Utf-8?B?YXR1cmFubw==?=" <aturano@xxxxxxxxxxxxxxxxxxxxxxxxx>
> >Subject: microsoft fax e-mail routing of incoming faxes
> >Date: Fri, 19 Aug 2005 10:14:03 -0700
> >Lines: 43
> >Message-ID: <BFFE3FA5-7AFE-433A-A33F-CC97E6560335@xxxxxxxxxxxxx>
> >MIME-Version: 1.0
> >Content-Type: text/plain;
> > charset="Utf-8"
> >Content-Transfer-Encoding: 7bit
> >X-Newsreader: Microsoft CDO for Windows 2000
> >Content-Class: urn:content-classes:message
> >Importance: normal
> >Priority: normal
> >X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
> >Newsgroups: microsoft.public.windows.server.sbs
> >NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.2.250
> >Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGXA03.phx.gbl
> >Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.server.sbs:145987
> >X-Tomcat-NG: microsoft.public.windows.server.sbs
> >
> >SBS 2003 e-mail routing has been working for over a year until I needed to
> >change the e-mail recipient. Once I changed it, faxes were no longer able
> to
> >be sent to the recipients inbox, even changing it back would not help.
> >
> >Event 32083
> >
> >Unable to route fax C:\Documents and Settings\All Users\Application
> >Data\Microsoft\Windows NT\MSFax\Queue\1C5A4DCEFBDC9.tif to the requested
> >e-mail address.
> >
> >followed by event 32089
> >
> >The Fax Service failed to execute a specific routing method. The service
> >will retry to route the fax according to the retries configuration. If the
> >retries fail, verify routing method configuration.
> > Job ID: 0x0401c5a4dcefbdc9.
> > Received on Device: 'Courier V.Everything EXT PnP (V90-x2)'
> > Sent from: '1'
> > Received file name: 'C:\Documents and Settings\All Users\Application
> >Data\Microsoft\Windows NT\MSFax\Queue\1C5A4DCEFBDC9.tif'.
> > Routing extension name: 'Microsoft Routing Extension'
> > Routing method name: 'Route through e-mail'
> >
> >
> > The following error occurred: 0x80040211
> > This error code indicates the cause of the error.
> >
> > Check the SMTP server configuration, and correct any anomalies.
> >
> >I have rechecked all to settings, reran the wizards etc. I am having the
> >same problem at a least 3 other clints now, including notification of
> >outgoing faxes. I appears this may be patch related. This server is upto
> date
> >except for SBS2003 SP1.
> >
> >I tried to reregister the Fxsroute.dll as in one of the other articles.
> but
> >recieved the following error.
> >
> >Fxsroute.dll was loaded but the dllregisterserver entry point was not
> found.
> >This file cannot be registered.
> >
> >Thanks for your help
> >
> >
> >
>
>
.