Re: Remote web workplace - "page cannot be displayed"

I don't want to RWW from inside, I was just doing it as a test ...

When I do http://fqdn/Remote it takes me to:
https://fqdn/Remote/logon.aspx?ReturnUrl=%2fremote%2fDefault.aspx

The router is configured with 4125 open and forwarding to the "external"
nic of the server.

"Cris Hanna [SBS-MVP]" wrote:

> you can't RWW from inside the network
> Not sure why you would want to
>
> From outside the network you need port 4125 open initially
>
> what if you do: http(no s)://servername.domainname.com(or net or whatever)/remote
>
> --
> Cris Hanna [SBS-MVP]
> -------------------------------------------------
> Please do not email me directly for assistance. Reply only in the Newsgroups for the benefit of everyone
> "Fred-It" <FredIt@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:5CF56986-0D0C-49A3-AAC9-0DE524E5D49B@xxxxxxxxxxxxxxxx
> When I try and access my remote web workplace from inside the network or
> outside, I get to the following page:
> https://FQDN/Remote/logon.aspx?ReturnUrl=%2fRemote%2fDefault.aspx, Then I
> recive the following error:
>
> The page cannot be displayed
> A problem has occurred with the Remote Web Workplace. Close this browser
> window, and then log on again. If this problem continues, contact the person
> responsible for your network.
>
> I am able to get to the server using the remote desktop connection
> internally and externally. I am also able to use OWA internally and
> externally. I belive I have opened all the necassary ports on my router.
>
> I get the certificate screen, I have installed the certificate .. then
> instead of a logon page I get the message above
.

Relevant Pages

  • RE: Cannot log out of RWW
    ... the problem occurs when the RWW component is ... The problem occurs when the network service has full permission to ... Find out what folder both the TEMP and TMP environment variables are ... <A problem has occurred with the Remote Web Workplace. ...
    (microsoft.public.windows.server.sbs)
  • Re: Remote Web Workplace ot working
    ... a part of RWW but RWW does not equal RDP via proxy. ... connected to the internet by a much faster connection than most SMB ... To setup SBS 2003 Remote Web Workplace, you my need to open the ... Vonage router for DHCP. ...
    (microsoft.public.windows.server.sbs)
  • Remote Web Workplace - Swing Migration?
    ... My inability to get into RWW on one client's network is driving me mad. ... If port 4125 is open on the firewall and on the router, ... (Other times I get a VBScript: Remote Desktop ...
    (microsoft.public.windows.server.sbs)
  • Re: sbs standard / dual nic problem
    ... If so why not use RWW to ... SBS WAN NIC. ... I cnnot configure the router to forward to this network as it is not the ...
    (microsoft.public.windows.server.sbs)
  • Re: Remote web workplace - "page cannot be displayed"
    ... You can access RWW from inside the network no problem, or at least, you ... I don't want to RWW from inside, I was just doing it as a test ... ... > A problem has occurred with the Remote Web Workplace. ...
    (microsoft.public.windows.server.sbs)