Re: SP1 order

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

Hi Brandy, I hadn't attempted it as it didn't look right (eg why would this
affect firewall) but have just done so and correct CECIW now works without
the error.



Thank you very much for your assistance.



Dean





""Brandy Nee [MSFT]"" <v-branee@xxxxxxxxxxxxxxxxxxxx> wrote in message
news:H4ItHA$oFHA.3672@xxxxxxxxxxxxxxxxxxxxxxxx
> Hello Dean,
>
> Thank you for posting back!
>
> I found the following error messages from the icwlog.txt:
>
> Error 0x80005006 returned from call to Fixing the inheritance for root
> dir().
> calling Set Web Publishing Rules (0x80005006).
> Error 0x80005006 returned from call to CRFireCommit::Commit().
>
> Based on my research, I noticed that this issue can be caused by varies of
> factors, please see:
>
> 1> The security on the default website is not set the way it should be. To
> resolve this issue, please see:
>
> 1. Open the IIS Management snap-in.
>
> 2. Open the properties of the Default Web Site and go to the Directory
> Security tab.
>
> 3. Go to the IP Address and Domain Name Restrictions setting and change
> the
> setting. Just do the opposite of what is set. If currently set to grant
> all, change it to deny all except for the local IP and subnet mask of the
> server.
>
> 4. Select all to apply the change to all subwebs.
>
> 5. Select all again to apply the change all the way down.
>
> 6. Close IIS and run "iisreset" (without the quotes) from the
> commandprompt.
>
> 7. You should then be able to run the CEICW successfully.
>
> 2> If you installed Front Page extensions and created a virtual directory,
> please removed the Front Page extensions on the default and removed the
> virtual directory.
>
> Sharepoint -->
> Virtual Server -->
> Administrative -->
> -->Uninstall Front Page Extensions
>
> Hope this information helps. If any thing is unclear, please let me know.
> I
> am looking forward to hearing from you!
>
> Best regards,
>
> Brandy Nee
>
> Microsoft CSS Online Newsgroup Support
>
> Get Secure! - www.microsoft.com/security
> ======================================================
> This newsgroup only focuses on SBS technical issues. If you have issues
> regarding other Microsoft products, you'd better post in the corresponding
> newsgroups so that they can be resolved in an efficient and timely manner.
> You can locate the newsgroup here:
> http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
>
> When opening a new thread via the web interface, we recommend you check
> the
> "Notify me of replies" box to receive e-mail notifications when there are
> any updates in your thread. When responding to posts via your newsreader,
> please "Reply to Group" so that others may learn and benefit from your
> issue.
>
> Microsoft engineers can only focus on one issue per thread. Although we
> provide other information for your reference, we recommend you post
> different incidents in different threads to keep the thread clean. In
> doing
> so, it will ensure your issues are resolved in a timely manner.
>
> For urgent issues, you may want to contact Microsoft CSS directly. Please
> check http://support.microsoft.com for regional support phone numbers.
>
> Any input or comments in this thread are highly appreciated.
> ======================================================
> This posting is provided "AS IS" with no warranties, and confers no
> rights.
>
>
>
> --------------------
>>From: "Dean Collins" <collins_dean"spam-me-here"@hotmail.com>
>>Newsgroups: microsoft.public.windows.server.sbs
>>References: <FupMe.2166$ZG2.966324@xxxxxxxxxxxxxxxxxx>
> <3RGXV7toFHA.2700@xxxxxxxxxxxxxxxxxxxxx>
> <h6zMe.12885$%w.8400@xxxxxxxxxxxxxxxxxx>
> <DkCvNOyoFHA.588@xxxxxxxxxxxxxxxxxxxxx>
>>Subject: Re: SP1 order
>>Lines: 278
>>X-Priority: 3
>>X-MSMail-Priority: Normal
>>X-Newsreader: Microsoft Outlook Express 6.00.2900.2527
>>X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2527
>>X-RFC2646: Format=Flowed; Original
>>Message-ID: <ZaHMe.13471$%w.1132@xxxxxxxxxxxxxxxxxx>
>>Date: Wed, 17 Aug 2005 13:44:25 GMT
>>NNTP-Posting-Host: 68.174.172.170
>>X-Complaints-To: abuse@xxxxxx
>>X-Trace: twister.nyc.rr.com 1124286265 68.174.172.170 (Wed, 17 Aug 2005
> 09:44:25 EDT)
>>NNTP-Posting-Date: Wed, 17 Aug 2005 09:44:25 EDT
>>Organization: Road Runner - NYC
>>Path:
> TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP08.phx.gbl!newsfeed00.sul.t-online.de!t-onli
> ne.de!border2.nntp.dca.giganews.com!nntp.giganews.com!cyclone1.gnilink.net!g
> nilink.net!cyclone.rdc-nyc.rr.com!news-out.nyc.rr.com!twister.nyc.rr.com.POS
> TED!53ab2750!not-for-mail
>>Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.server.sbs:145229
>>X-Tomcat-NG: microsoft.public.windows.server.sbs
>>
>>Sorry Brandy, your email address bounces these files because of size.
>>
>>
>>
>>I have emailed the icwlog only as this is the only 1 not available on the
>>website.
>>
>>
>>
>>Cheers,
>>
>>Dean
>>
>>
>>
>>
>>
>>""Brandy Nee [MSFT]"" <v-branee@xxxxxxxxxxxxxxxxxxxx> wrote in message
>>news:DkCvNOyoFHA.588@xxxxxxxxxxxxxxxxxxxxxxxx
>>> Hello Dean,
>>>
>>> Thank you for posting back!
>>>
>>> I can see your log files on the link, but I suggest you that send them
>>> to
>>> my mailbox for security reason: v-branee@xxxxxxxxxxxxxx
>>>
>>> Also, please go c:\program files\microsoft windows small business
>>> server\support, send the icwlog.txt to my mailbox as well.
>>>
>>> I am appreciated your time and cooperation, and looking forward to
> hearing
>>> from you!
>>>
>>> Best regards,
>>>
>>> Brandy Nee
>>>
>>> Microsoft CSS Online Newsgroup Support
>>>
>>> Get Secure! - www.microsoft.com/security
>>> ======================================================
>>> This newsgroup only focuses on SBS technical issues. If you have issues
>>> regarding other Microsoft products, you'd better post in the
> corresponding
>>> newsgroups so that they can be resolved in an efficient and timely
> manner.
>>> You can locate the newsgroup here:
>>> http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
>>>
>>> When opening a new thread via the web interface, we recommend you check
>>> the
>>> "Notify me of replies" box to receive e-mail notifications when there
>>> are
>>> any updates in your thread. When responding to posts via your
>>> newsreader,
>>> please "Reply to Group" so that others may learn and benefit from your
>>> issue.
>>>
>>> Microsoft engineers can only focus on one issue per thread. Although we
>>> provide other information for your reference, we recommend you post
>>> different incidents in different threads to keep the thread clean. In
>>> doing
>>> so, it will ensure your issues are resolved in a timely manner.
>>>
>>> For urgent issues, you may want to contact Microsoft CSS directly.
>>> Please
>>> check http://support.microsoft.com for regional support phone numbers.
>>>
>>> Any input or comments in this thread are highly appreciated.
>>> ======================================================
>>> This posting is provided "AS IS" with no warranties, and confers no
>>> rights.
>>>
>>>
>>>
>>> --------------------
>>>>From: "Dean Collins" <collins_dean"spam-me-here"@hotmail.com>
>>>>Newsgroups: microsoft.public.windows.server.sbs
>>>>References: <FupMe.2166$ZG2.966324@xxxxxxxxxxxxxxxxxx>
>>> <3RGXV7toFHA.2700@xxxxxxxxxxxxxxxxxxxxx>
>>>>Subject: Re: SP1 order
>>>>Lines: 161
>>>>X-Priority: 3
>>>>X-MSMail-Priority: Normal
>>>>X-Newsreader: Microsoft Outlook Express 6.00.2900.2527
>>>>X-RFC2646: Format=Flowed; Original
>>>>X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2527
>>>>Message-ID: <h6zMe.12885$%w.8400@xxxxxxxxxxxxxxxxxx>
>>>>Date: Wed, 17 Aug 2005 04:33:17 GMT
>>>>NNTP-Posting-Host: 68.174.172.170
>>>>X-Complaints-To: abuse@xxxxxx
>>>>X-Trace: twister.nyc.rr.com 1124253197 68.174.172.170 (Wed, 17 Aug 2005
>>> 00:33:17 EDT)
>>>>NNTP-Posting-Date: Wed, 17 Aug 2005 00:33:17 EDT
>>>>Organization: Road Runner - NYC
>>>>Path:
>>>
> TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP08.phx.gbl!newsfeed00.sul.t-online.de!t-onli
>>>
> ne.de!border2.nntp.dca.giganews.com!nntp.giganews.com!cyclone1.gnilink.net!g
>>>
> nilink.net!cyclone.rdc-nyc.rr.com!news-out.nyc.rr.com!twister.nyc.rr.com.POS
>>> TED!53ab2750!not-for-mail
>>>>Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.server.sbs:145094
>>>>X-Tomcat-NG: microsoft.public.windows.server.sbs
>>>>
>>>>Hi Brandy,
>>>>your interpretation is correct, there is no error message during CEICW
>>>>it
>>>>just says firewall component failed would you like to continue and if I
>>> hit
>>>>yes then no identifiable problems.
>>>>
>>>>I wasn't able to post the logs here (too large) and in case anyone else
>>> has
>>>>some insights they would like to share rather than emailing them I have
>>>>posted them to this link
>>>>http://www.cognation.net/microsoft/microsoft.htm
>>>>
>>>>thanks in advance for your time.
>>>>
>>>>
>>>>Dean
>>>>p.s. I can only assume there is nothing in there that is a problem with
>>> the
>>>>world seeing as you asked me to post it to the entire newsgroup but if
>>>>anyone thinks elsewise then please let me know.
>>>>
>>>>
>>>>""Brandy Nee [MSFT]"" <v-branee@xxxxxxxxxxxxxxxxxxxx> wrote in message
>>>>news:3RGXV7toFHA.2700@xxxxxxxxxxxxxxxxxxxxxxxx
>>>>> Hello Dean,
>>>>>
>>>>> Thank you for posting to the SBS Newsgroup.
>>>>>
>>>>> I understand that after you installed SBS SP1 on the server, you ran
> the
>>>>> CEICW wizard and you were stopped at the page of Firewall. If I have
>>>>> misunderstood your concern, please let me know.
>>>>>
>>>>> Due to lack of information for research, I need your help to gather
>>>>> the
>>>>> following information for troubleshooting:
>>>>>
>>>>> 1. What is the exact error message shown to you? Please paste the
>>>>> exact
>>>>> error message to the Newsgroup for accurate research.
>>>>>
>>>>> 2. Please go to %system drive%\program files\Microsoft
>>> Integration\windows
>>>>> small business server 2003\logs, paste all the content in the folder
>>>>> to
>>>>> the
>>>>> Newsgroup. If the file is too large, you can zip it and send it to my
>>>>> mailbox. I need the whole content in the folder for research.
>>>>>
>>>>> 3. For upgrading to Windows Small Business Server 2003 SP1 (Q885918),
>>>>> please go to C:\Windows\KB885918.log, and paste the full content to
>>>>> the
>>>>> Newsgroup.
>>>>>
>>>>> I am appreciated your time and cooperation and am looking forward to
>>>>> hearing from you!
>>>>>
>>>>>
>>>>> Best regards,
>>>>>
>>>>> Brandy Nee
>>>>>
>>>>> Microsoft CSS Online Newsgroup Support
>>>>>
>>>>> Get Secure! - www.microsoft.com/security
>>>>> ======================================================
>>>>> This newsgroup only focuses on SBS technical issues. If you have
>>>>> issues
>>>>> regarding other Microsoft products, you'd better post in the
>>> corresponding
>>>>> newsgroups so that they can be resolved in an efficient and timely
>>> manner.
>>>>> You can locate the newsgroup here:
>>>>> http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
>>>>>
>>>>> When opening a new thread via the web interface, we recommend you
>>>>> check
>>>>> the
>>>>> "Notify me of replies" box to receive e-mail notifications when there
>>>>> are
>>>>> any updates in your thread. When responding to posts via your
>>>>> newsreader,
>>>>> please "Reply to Group" so that others may learn and benefit from your
>>>>> issue.
>>>>>
>>>>> Microsoft engineers can only focus on one issue per thread. Although
>>>>> we
>>>>> provide other information for your reference, we recommend you post
>>>>> different incidents in different threads to keep the thread clean. In
>>>>> doing
>>>>> so, it will ensure your issues are resolved in a timely manner.
>>>>>
>>>>> For urgent issues, you may want to contact Microsoft CSS directly.
>>>>> Please
>>>>> check http://support.microsoft.com for regional support phone numbers.
>>>>>
>>>>> Any input or comments in this thread are highly appreciated.
>>>>> ======================================================
>>>>> This posting is provided "AS IS" with no warranties, and confers no
>>>>> rights.
>>>>>
>>>>>
>>>>>
>>>>> --------------------
>>>>>>From: "Dean Collins" <collins_dean"spam-me-here"@hotmail.com>
>>>>>>Newsgroups: microsoft.public.windows.server.sbs
>>>>>>Subject: SP1 order
>>>>>>Lines: 43
>>>>>>X-Priority: 3
>>>>>>X-MSMail-Priority: Normal
>>>>>>X-Newsreader: Microsoft Outlook Express 6.00.2900.2527
>>>>>>X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2527
>>>>>>X-RFC2646: Format=Flowed; Original
>>>>>>Message-ID: <FupMe.2166$ZG2.966324@xxxxxxxxxxxxxxxxxx>
>>>>>>Date: Tue, 16 Aug 2005 17:36:37 GMT
>>>>>>NNTP-Posting-Host: 68.174.172.170
>>>>>>X-Complaints-To: abuse@xxxxxx
>>>>>>X-Trace: twister.nyc.rr.com 1124213797 68.174.172.170 (Tue, 16 Aug
>>>>>>2005
>>>>> 13:36:37 EDT)
>>>>>>NNTP-Posting-Date: Tue, 16 Aug 2005 13:36:37 EDT
>>>>>>Organization: Road Runner - NYC
>>>>>>Path:
>>>>>
>>>
> TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP08.phx.gbl!newsfeed00.sul.t-online.de!t-onli
>>>>>
>>>
> ne.de!border2.nntp.dca.giganews.com!nntp.giganews.com!cyclone1.gnilink.net!g
>>>>>
>>>
> nilink.net!cyclone.rdc-nyc.rr.com!news-out.nyc.rr.com!twister.nyc.rr.com.POS
>>>>> TED!not-for-mail
>>>>>>Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.server.sbs:144941
>>>>>>X-Tomcat-NG: microsoft.public.windows.server.sbs
>>>>>>
>>>>>>how come microsoft says to install sbs 2003 sp1 in order of
>>>>>>
>>>>>>
>>>>>> 1.. Windows Server 2003 Service Pack 1
>>>>>>
>>>>>> 2.. Windows SharePoint Services 2.0 Service Pack 1
>>>>>>
>>>>>> 3.. Exchange Server 2003 Service Pack 1
>>>>>>
>>>>>> 4.. Windows XP SP2 for Client Deployment
>>>>>>
>>>>>> 5.. Windows Small Business Server 2003 Service Pack 1
>>>>>>
>>>>>>yet the msvp article recomends you to install in the order of
>>>>>>
>>>>>> 1.. Windows Server 2003 Service Pack 1
>>>>>>
>>>>>> 2.. Windows SharePoint Services 2.0 Service Pack 1
>>>>>>
>>>>>> 3.. Windows XP SP2 for Client Deployment
>>>>>>
>>>>>> 4.. Exchange Server 2003 Service Pack 1
>>>>>>
>>>>>> 5.. Windows Small Business Server 2003 Service Pack 1
>>>>>>
>>>>>>when I installed it the first way (the way it came on the MS disks) I
>>> also
>>>>>>installed disc 3 with isa 2004 etc - I couldn't get isa to work and
>>>>>>was
>>>>>>running out of time late sunday so i had to reinstall sbs 2003 from
>>>>> scratch
>>>>>>and then restore from backup. (interestingly enough Step 2 both times
>>> came
>>>>>>up as already installed?)
>>>>>>
>>>>>>I then installed in the msvp order (without disc 3) and everything has
>>>>>>seemed to work fine with the following exception, whenever I run CECIW
>>>>>>it
>>>>>>always comes up with a firewall issue and says check logs but I cant
>>>>>>find
>>>>> a
>>>>>>problem with the logs.
>>>>>>
>>>>>>I'm going to run with the current install for the next week and then
>>>>> backup
>>>>>>on friday before trying to install ISA 2004 again on the weekend.
>>>>>>
>>>>>>TIA,
>>>>>>Dean
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>
>>>>
>>>>
>>>
>>
>>
>>
>


.

Relevant Pages

  • Re: IIS Stopped working properly.
    ... I wonder if there is a problem in ISA Server. ... This newsgroup only focuses on SBS technical issues. ... If you have issues regarding other Microsoft products, you'd better post in the corresponding newsgroups so that they can be resolved in an efficient and timely manner. ... you may want to contact Microsoft CSS directly. ...
    (microsoft.public.windows.server.sbs)
  • Re: Fax service dont send delivery receipt.
    ... I will continue work with you till Brandy back. ... This newsgroup only focuses on SBS technical issues. ... you may want to contact Microsoft CSS directly. ... >> any updates in your thread. ...
    (microsoft.public.windows.server.sbs)
  • Re: CEICW Fails on Firewall Configuration
    ... Hi Brandy, I hadn't attempted it as it didn't look right (eg why would this ... > resolve this issue, please see: ... > This newsgroup only focuses on SBS technical issues. ... you may want to contact Microsoft CSS directly. ...
    (microsoft.public.windows.server.sbs)
  • Re: Remote Shutdown
    ... > the Default Domain Controllers policy settings will override the settings ... > This newsgroup only focuses on SBS technical issues. ... > newsgroups so that they can be resolved in an efficient and timely manner. ... you may want to contact Microsoft CSS directly. ...
    (microsoft.public.windows.server.sbs)
  • RE: mail relay problems setting up
    ... the "530 authentication requred" returned from the BT SMTP server. ... > Thank you for posting to the SBS Newsgroup. ... > newsgroups so that they can be resolved in an efficient and timely manner. ... you may want to contact Microsoft CSS directly. ...
    (microsoft.public.windows.server.sbs)