Re: Problem connection XP SP2 Workstation after installing SBS 2k3

Thanks for the replies. I solved the problem. It had to do with ISA 2004 not
allowing IP fragments. Not sure why it only affected my computer and not
others on the same network. I had tried all the things that you recommended
already. If you have any ideas about the ISA ip fragments thing I would be
happy to hear them because I would prefer to have is block ip fragments if at
all possible.

Thanks,
Chris

""Charles Yang [MSFT]"" wrote:

> HI Chris,
>
> Thanks for using this newsgroup.
>
> Issue description:
>
> ===========
>
> I understand that you encountered 1006 and 1030 error on only one of the
> workstations.
>
> Analyzing and suggestions:
>
> ===========
>
> Generally speaking, this error might be related to group policy did not
> process well, it might be caused by many factors, please refer to my
> suggestions below:
>
> Before we go any further, please make sure Do not do the same things to the
> computers which are not getting this events.
>
> 1. Please rejoin the domain follow my steps below, I understand that you
> have do it but please double check it to make sure that you follow the
> steps below to do it:
>
> Actually this issue can occur if the computer accounts for the computers
> are corrupted. To resolve the issue, you should try the following steps to
> quit and rejoin in the domain (disjoining and joining):
>
> A. Quit the clients from the domain and join in a workgroup (workgroups).
>
> B. Open the "Active Directory Users and Computers" snap-in (dsa.msc).
>
> C. Open the Computers or My Business\Computers\SBSComputers container.
> Right click on a computer account and choose Delete. Do this for all the
> problematic computers.
>
> D. Join the clients into the domain again.
>
> You should make sure all clients point to the SBS server's internal IP
> address as their ONLY DNS server. Also both network adapters on the SBS
> server are pointing to the SBS internal IP address of the only DNS server.
> In DNS, use forwarder to forward all name resolution requests to the ISP's
> DNS server. For more information, please refer to the following Microsoft
> Knowledge Base article:
>
> 825763 How to configure Internet access in Windows Small Business Server
> 2003
> http://support.microsoft.com/?id=825763
>
> Regarding how to check DNS for Dynamic Update, please run DNSMGMT.MSC to
> open the DNS management console, right click on the "server.domain.local"
> forward lookup zone and choose Properties and then make sure the "Dynamic
> Updates" is set as "Secure Only". If you made change to the settings in
> DNS, you should restart the DNS Server service (right click on the server
> name and choose All Tasks->Restart).
>
> Regarding the event 1030 problem, please make sure the "Distributed File
> System" service is started on the server. Also make sure DFS Client is
> turned on on the clients using the following steps:
>
> WARNING: If you use Registry Editor incorrectly, you may cause serious
> problems that may require you to reinstall your operating system. Microsoft
> cannot guarantee that you can solve problems that result from using
> Registry Editor incorrectly. Use Registry Editor at your own risk.
>
> 1. Click Start, and then click Run.
>
> 2. In the Open box, type "regedt32" (without the quotation marks), and then
> click OK.
>
> 3. In the Registry Editor window, locate the following registry key:
>
> HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Mup
>
> 4. In the right details pane, check if you see the "DisableDFS" value. If
> you cannot find it, DFS Client should be enabled. If you see it,
> double-click DisableDFS. The DFS client is turned off if the value in the
> "Value data" box is 1. The DFS client is turned on if the value in the
> "Value data" box is 0.
>
> 5. In the Edit DWORD Value dialog box that appears, type "0" (without the
> quotation marks) in the "Value data" box, and then click OK.
>
> 6. On the File menu, click Exit to quit Registry Editor.
>
>
> Please do not hesitate to let me know if you have any further concerns. I
> will be here waitting for your updates.
>
>
>
> Best regards,
>
> Charles Yang (MSFT)
>
> Microsoft CSS Online Newsgroup Support
>
> Get Secure! - www.microsoft.com/security
>
> ======================================================
> This newsgroup only focuses on SBS technical issues. If you have issues
> regarding other Microsoft products, you'd better post in the corresponding
> newsgroups so that they can be resolved in an efficient and timely manner.
> You can locate the newsgroup here:
> http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
>
> When opening a new thread via the web interface, we recommend you check the
> "Notify me of replies" box to receive e-mail notifications when there are
> any updates in your thread. When responding to posts via your newsreader,
> please "Reply to Group" so that others may learn and benefit from your
> issue.
>
> Microsoft engineers can only focus on one issue per thread. Although we
> provide other information for your reference, we recommend you post
> different incidents in different threads to keep the thread clean. In doing
> so, it will ensure your issues are resolved in a timely manner.
>
> For urgent issues, you may want to contact Microsoft CSS directly. Please
> check http://support.microsoft.com for regional support phone numbers.
>
> Any input or comments in this thread are highly appreciated.
> ======================================================
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
>
> =====================================================
> When responding to posts, please "Reply to Group" via your newsreader so
> that others may learn and benefit from your issue.
> =====================================================
>
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
> --------------------
> | From: "Cris Hanna [SBS-MVP]"
> <crisnospamhanna@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
> | References: <DEECBFFC-B2E5-472D-9364-49D91C5968E4@xxxxxxxxxxxxx>
> | Subject: Re: Problem connection XP SP2 Workstation after installing SBS
> 2k3 SP3
> | Date: Fri, 19 Aug 2005 16:41:27 -0500
> | Lines: 143
> | MIME-Version: 1.0
> | Content-Type: multipart/alternative;
> | boundary="----=_NextPart_000_035C_01C5A4DC.D85A63D0"
> | X-Priority: 3
> | X-MSMail-Priority: Normal
> | X-Newsreader: Microsoft Outlook Express 6.00.2900.2670
> | X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2670
> | Message-ID: <e74#DbQpFHA.3244@xxxxxxxxxxxxxxxxxxxx>
> | Newsgroups: microsoft.public.windows.server.sbs
> | NNTP-Posting-Host: cbn-24.182.131.195.cbnstl.net 24.182.131.195
> | Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP09.phx.gbl
> | Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.server.sbs:146065
> | X-Tomcat-NG: microsoft.public.windows.server.sbs
> |
> | have you removed the workstation from the domain...set the workstation to
> workgroup and then add the computer back to the domain on the server and
> then run connectcomputer on the workstation?
> | --
> | Cris Hanna [SBS-MVP]
> | -------------------------------------------------
> | Please do not email me directly for assistance. Reply only in the
> Newsgroups for the benefit of everyone
> | "Chris Oakes" <ChrisOakes@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> news:DEECBFFC-B2E5-472D-9364-49D91C5968E4@xxxxxxxxxxxxxxxx
> | Here is my issue. I have an XP SP2(clean install) that was connected to
> my
> | SBS 2K3 server. When we updated the SBS server (from SP CD's) to SP1,
> my XP
> | workstation quit working correctly I get to errors in the event log:
> | Event Type: Error
> | Event Source: Userenv
> | Event Category: None
> | Event ID: 1006
> | Date: 8/19/2005
> | Time: 11:32:57 AM
> | User: PROCT\Chris
> | Computer: CHRIS
> | Description:
> | Windows cannot bind to PROCT.LOCAL domain. (Local Error). Group Policy
> processing aborted.
> | For more information, see Help and Support Center at
> | http://go.microsoft.com/fwlink/events.asp.
> |
> | comes first, immediately followed by the following:
> | Event Type: Error
> | Event Source: Userenv
> | Event Category: None
> | Event ID: 1030
> | Date: 8/19/2005
> | Time: 11:32:57 AM
> | User: PROCT\Chris
> | Computer: CHRIS
> | Description:
> | Windows cannot query for the list of Group Policy objects. A message
> that
> | describes the reason for this was previously logged by the policy
> engine.
> | For more information, see Help and Support Center at
> | http://go.microsoft.com/fwlink/events.asp.
> |
> | I have searched the KB and tried everything I could find on these
> errors
> | with no luck. I have even pulled this workstation out of the domain and
> then
> | rejoined it to the domain, also with no luck. I am stumped. Any help or
> | suggestions would be greatly appreciated.
> |
>
>
.

Relevant Pages

  • RE: Unable to send any fax only from workstation
    ... You can also run the following command on the server and one problematic ... Microsoft CSS Online Newsgroup Support ... newsgroups so that they can be resolved in an efficient and timely manner. ... Unable to send any fax only from workstation ...
    (microsoft.public.windows.server.sbs)
  • Re: Cant logon from workstation as Administrator
    ... server box and let me know if there is any problem related to the issue. ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ... be able to logon using ANY accounts from that workstation. ...
    (microsoft.public.windows.server.sbs)
  • RE: Unable to send any fax only from workstation
    ... Microsoft CSS Online Newsgroup Support ... Unable to send any fax only from workstation ... Newsgroups: microsoft.public.windows.server.sbs ... Please also ensure you have installed the hotfix 884032 on the SBS server ...
    (microsoft.public.windows.server.sbs)
  • Re: SBS SHared Printer Problem
    ... I understand that the issue happens on a certain workstation. ... Microsoft Online Newsgroup Support ... If you try printing on the SBS server, ...
    (microsoft.public.windows.server.sbs)
  • RE: Group Policies Events 1030 & 1058
    ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ... Please restart the server. ... The IP address for the Primary DNS server must be the internal IP ...
    (microsoft.public.windows.server.sbs)