RE: HELP RAID failure after sp1 install

Tech-Archive recommends: Fix windows errors by optimizing your registry

I had planned to continue with the rest of the SBS 2K3 install. The problem
happened after the first in the series. I have since found that it was a bad
drive that was causing the error. I had to remove the drive and put a new one
in then re-create the mirror. I am now in the process of finishing the sp1
update. Thanks for responses.

""Brandy Nee [MSFT]"" wrote:

> Hello Detroit,
>
> Thank you for posting back!
>
> I understand that this issue came out from you installed Windows Server
> 2003 SP1. Please understand that we do not suggest customer only install
> Windows Server 2003 SP1 on the SBS 2K3 server, due to some known integrated
> issues. Please see:
>
> Known issues that may occur if you install Windows Server 2003 SP1 on
> Windows Small Business Server 2003
> http://support.microsoft.com/default.aspx?scid=kb;en-us;897342
>
> I suggest you that either remove the Windows Server 2003 SP1, or continue
> installing the rest of the SBS 2K3 SP1.
>
> For detail instructions to install SBS 2003 SP1, please refer to the
> following SBS 2003 SP1 download page.
>
> [Note]: Please read it carefully and follow the instruction strictly to
> complete the installation.
>
> http://www.microsoft.com/downloads/details.aspx?FamilyId=B6F8A4C0-B707-4161-
> ADEB-44F1B756119F&displaylang=en
>
> For the Windows Small Business Server 2003 Premium SP1 which includes ISA
> 2004/SQL SP4, you need to order it.
> http://go.microsoft.com/fwlink/?LinkId=45336
>
> For the detailed steps to install ISA 2K4 and SQL 2000 SP4 (and W/MSDE
> SP4), please see following document:
>
> Completing Setup for Microsoft Windows Small Business Server Premium
> Technologies
> http://www.microsoft.com/downloads/details.aspx?FamilyId=87A48D35-54AB-4F63-
> 90A3-A884311202E1&displaylang=en
>
> Hope this information helps. If anything is unclear, please feel free to
> let me know. I am looking forward to your reply.
>
> Best regards,
>
> Brandy Nee
>
> Microsoft CSS Online Newsgroup Support
>
> Get Secure! - www.microsoft.com/security
> ======================================================
> This newsgroup only focuses on SBS technical issues. If you have issues
> regarding other Microsoft products, you'd better post in the corresponding
> newsgroups so that they can be resolved in an efficient and timely manner.
> You can locate the newsgroup here:
> http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
>
> When opening a new thread via the web interface, we recommend you check the
> "Notify me of replies" box to receive e-mail notifications when there are
> any updates in your thread. When responding to posts via your newsreader,
> please "Reply to Group" so that others may learn and benefit from your
> issue.
>
> Microsoft engineers can only focus on one issue per thread. Although we
> provide other information for your reference, we recommend you post
> different incidents in different threads to keep the thread clean. In doing
> so, it will ensure your issues are resolved in a timely manner.
>
> For urgent issues, you may want to contact Microsoft CSS directly. Please
> check http://support.microsoft.com for regional support phone numbers.
>
> Any input or comments in this thread are highly appreciated.
> ======================================================
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
>
>
> --------------------
> >Thread-Topic: HELP RAID failure after sp1 install
> >thread-index: AcWkwNgHHPRVA9O5RvWciiEB860lTw==
> >X-WBNR-Posting-Host: 71.134.9.91
> >From: "=?Utf-8?B?RGV0cm9pdA==?=" <Detroit@xxxxxxxxxxxxxxxxxxxxxxxxx>
> >References: <ADC0DA2F-E726-468B-97D5-E717620A84A2@xxxxxxxxxxxxx>
> <z$x$i9GpFHA.3472@xxxxxxxxxxxxxxxxxxxxx>
> >Subject: RE: HELP RAID failure after sp1 install
> >Date: Fri, 19 Aug 2005 06:21:01 -0700
> >Lines: 153
> >Message-ID: <5163ADA3-95CC-4B20-BEAF-162FD8952BA2@xxxxxxxxxxxxx>
> >MIME-Version: 1.0
> >Content-Type: text/plain;
> > charset="Utf-8"
> >Content-Transfer-Encoding: 8bit
> >X-Newsreader: Microsoft CDO for Windows 2000
> >Content-Class: urn:content-classes:message
> >Importance: normal
> >Priority: normal
> >X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
> >Newsgroups: microsoft.public.windows.server.sbs
> >NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.2.250
> >Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGXA03.phx.gbl
> >Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.server.sbs:145904
> >X-Tomcat-NG: microsoft.public.windows.server.sbs
> >
> >Sorry, I forgot to add that this is microsoft software raid or "mirrored"
> >
> >""Brandy Nee [MSFT]"" wrote:
> >
> >> Hello Detroit,
> >>
> >> Thank you for posting to the SBS Newsgroup.
> >>
> >> I understand that after you installed SP1 on the SBS 2K3 server, there
> is
> >> error Event ID 15 in the Event Viewer. If I have misunderstood your
> issue,
> >> please let me know.
> >>
> >> Before we start to troubleshoot the issue, I need to know what exact SP1
> >> you installed, Windows Server 2003 SP1 or SBS 2K3 SP1?
> >>
> >> Event ID 15 indicates that the device is not ready. This can be the
> result
> >> of SCSI host adapter configuration issues or other problems. I suggest
> you
> >> that check with the hardware manufacturer for updated firmware, drivers,
> or
> >> known issues. This could also indicate a malfunctioning device. This
> error
> >> occurs at the device level.
> >>
> >> Please see the following KB articles for reference:
> >>
> >> 259237 Troubleshooting event ID 9, 11, and 15 on Cluster Servers
> >> http://support.microsoft.com/?id=259237
> >>
> >> 311081 Troubleshooting Multiple Cluster Symptoms on the Same SAN
> >> http://support.microsoft.com/?id=311081
> >>
> >> Hope this information helps. If anything is unclear, please feel free to
> >> let me know. I am glad to be of assistance!
> >>
> >> Best regards,
> >>
> >> Brandy Nee
> >>
> >> Microsoft CSS Online Newsgroup Support
> >>
> >> Get Secure! - www.microsoft.com/security
> >> ======================================================
> >> This newsgroup only focuses on SBS technical issues. If you have issues
> >> regarding other Microsoft products, you'd better post in the
> corresponding
> >> newsgroups so that they can be resolved in an efficient and timely
> manner.
> >> You can locate the newsgroup here:
> >> http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
> >>
> >> When opening a new thread via the web interface, we recommend you check
> the
> >> "Notify me of replies" box to receive e-mail notifications when there
> are
> >> any updates in your thread. When responding to posts via your
> newsreader,
> >> please "Reply to Group" so that others may learn and benefit from your
> >> issue.
> >>
> >> Microsoft engineers can only focus on one issue per thread. Although we
> >> provide other information for your reference, we recommend you post
> >> different incidents in different threads to keep the thread clean. In
> doing
> >> so, it will ensure your issues are resolved in a timely manner.
> >>
> >> For urgent issues, you may want to contact Microsoft CSS directly.
> Please
> >> check http://support.microsoft.com for regional support phone numbers.
> >>
> >> Any input or comments in this thread are highly appreciated.
> >> ======================================================
> >> This posting is provided "AS IS" with no warranties, and confers no
> rights.
> >>
> >>
> >>
> >> --------------------
> >> >Thread-Topic: HELP RAID failure after sp1 install
> >> >thread-index: AcWkGcZDl+z7xYQDQ0+JA2R3v16O0A==
> >> >X-WBNR-Posting-Host: 208.57.157.104
> >> >From: "=?Utf-8?B?RGV0cm9pdA==?=" <Detroit@xxxxxxxxxxxxxxxxxxxxxxxxx>
> >> >Subject: HELP RAID failure after sp1 install
> >> >Date: Thu, 18 Aug 2005 10:25:05 -0700
> >> >Lines: 60
> >> >Message-ID: <ADC0DA2F-E726-468B-97D5-E717620A84A2@xxxxxxxxxxxxx>
> >> >MIME-Version: 1.0
> >> >Content-Type: text/plain;
> >> > charset="Utf-8"
> >> >Content-Transfer-Encoding: 8bit
> >> >X-Newsreader: Microsoft CDO for Windows 2000
> >> >Content-Class: urn:content-classes:message
> >> >Importance: normal
> >> >Priority: normal
> >> >X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
> >> >Newsgroups: microsoft.public.windows.server.sbs
> >> >NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.2.250
> >> >Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGXA03.phx.gbl
> >> >Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.server.sbs:145604
> >> >X-Tomcat-NG: microsoft.public.windows.server.sbs
> >> >
> >> >I am running software RAID (mirror) and after installing sp1 I have
> the
> >> >following errors in the event log.
> >> >
> >> >Event Type: Error
> >> >Event Source: Disk
> >> >Event Category: None
> >> >Event ID: 15
> >> >Date: 8/18/2005
> >> >Time: 6:07:10 AM
> >> >User: N/A
> >> >Computer: HQ
> >> >Description:
> >> >The device, \Device\Harddisk0, is not ready for access yet.
> >> >
> >> >For more information, see Help and Support Center at
> >> >http://go.microsoft.com/fwlink/events.asp.
> >> >Data:
> >> >0000: 04 00 68 00 01 00 ba 00 ..h...º.
> >> >0008: 00 00 00 00 0f 00 04 c0 .......À
> >> >0010: 04 01 00 00 9d 00 00 c0 ......À
> >> >0018: 00 00 00 00 00 00 00 00 ........
> >> >0020: 00 00 00 00 00 00 00 00 ........
> >> >0028: ba ec 19 00 00 00 00 00 ºì......
> >> >0030: ff ff ff ff 00 00 00 00 ÿÿÿÿ....
> >> >0038: 40 00 00 0a 00 00 00 00 @.......
> >> >0040: 00 20 0a 12 80 03 20 00 . ..€. .
> >> >0048: 00 02 00 00 0a 00 00 00 ........
> >> >0050: 08 e0 a7 89 80 6b 99 89 .à §‰€k™‰
> >> >0058: 00 00 00 00 50 69 99 89 ....Pi™‰
> >> >0060: 01 00 00 00 3d f5 4f 0e ....=õO.
> >> >0068: 2a 00 0e 4f f5 3d 00 00 *..Oõ=..
> >> >0070: 01 00 00 00 00 00 00 00 ........
> >> >0078: 00 00 00 00 00 00 00 00 ........
> >> >0080: 00 00 00 00 00 00 00 00 ........
> >> >0088: 00 00 00 00 00 00 00 00 ........
> >> >
> >> >
> >> >and
> >> >
> >> >
> >> >Event Type: Warning
> >> >Event Source: dmio
> >> >Event Category: None
> >> >Event ID: 5
> >> >Date: 8/18/2005
> >> >Time: 6:07:10 AM
> >> >User: N/A
> >> >Computer: HQ
> >> >Description:
> >> >dmio: Disk1-01 Subdisk detached from volume Volume1-01
> >> >
> >> >For more information, see Help and Support Center at
> >> >http://go.microsoft.com/fwlink/events.asp.
> >> >Data:
> >> >0000: 00 00 00 00 05 00 4a 00 ......J.
> >> >0008: 00 00 00 00 05 00 05 80 .......€
> >> >0010: 00 00 00 00 00 00 00 00 ........
> >> >0018: 01 00 00 00 00 00 00 00 ........
> >> >0020: 00 00 00 00 00 00 00 00 ........
> >> >
> >> >
> >>
> >>
> >
>
>
.

Relevant Pages

  • Re: The View Usage Report tool may report many e-mail messages in Windows Small Business Server
    ... does the Microsoft Baseline Security Analyzer ... let you know that you are missing the SBS 2003 SP1 service pack? ... Exchange Server 2003 Service Pack 2: ...
    (microsoft.public.windows.server.sbs)
  • RE: SBS2k3 SP1 SP2 mess
    ... It said file not found when attempting to install SBS SP1. ... Windows SharePoint Services 2.0 Service Pack 1 ...
    (microsoft.public.windows.server.sbs)
  • RE: Failed while upgrading SharePoint or Monitoring to SP4.
    ... Can I confirm with you that the SBS 2003 premium edition installation CDs ... reinstall the Intranet component of Windows Small Business Server 2003 SP1 ... Microsoft CSS Online Newsgroup Support ... This is an install of SBS SP1 Premium Edition. ...
    (microsoft.public.windows.server.sbs)
  • RE: SBS2k3 sp1 tips
    ... I recommend you upgrade SBS Standard to Premium firstly and then install ... SBS 2003 SP1. ... Microsoft CSS Online Newsgroup Support ...
    (microsoft.public.windows.server.sbs)
  • RE: Group Policies on SBS 2k3 R2 not allowing 64-bit apps to insta
    ... as the one I was using did not meet the minimum requirements for SBS 2003 R2 ... Microsoft Control Applications Specialist / Hardware Driver ... This newsgroup only focuses on SBS technical issues. ... If it has not been installed, ...
    (microsoft.public.windows.server.sbs)