My Server?

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Hello,

Will my server work well for 5 users.

2 x 2.0ghz Xeon Processors
Tyan Thunder i7500 (S2720) Motherboard
4 x 512MB PC3200 DDR-SDRAM
Adaptec 2000S Raid Card
6 x Seagate 36GB10,000RPM SCSI Disks
LG DVD-ROM/CDRW
Floppy Disk Drive

Thanks
Ben


.

Relevant Pages

  • RE: Couple Questions Before I install for first time.
    ... Once the box is up run modconf from the command line to load any modules you need, but the NIC and adaptec card should be there during the install. ... The motherboard has a built in Adaptec aic7896/97 Ultra2 SCSI adapter, is this supported by default without any trouble? ...
    (Debian-User)
  • Re: Help needed w/ HighPoint RocketRAID 3120 on FreeBSD 7.1-RELEASE
    ... Highpoint was very cavalier about the whole thing. ... motherboard has its own RAID controller, ... my working theory is that this RocketRAID is not compatible with my ... I could get the RAID card to function, but I couldn't boot from it. ...
    (freebsd-questions)
  • I2O question - Adaptec 2400A RAID card
    ... I have a system running RH9 with an Adaptec 2400A Raid card, ... with the 2.4 kernel it is using the dpt_i2o module. ... I use the Adaptec Gui tools to manage the RAID systems, ...
    (Fedora)
  • Adaptec 21610
    ... I have an Adaptec 21610SA raid card. ... correctly, I should be using the aacraid module, however it hangs the ... I have looked at the Adaptec supported drivers. ... send the line "unsubscribe linux-kernel" in ...
    (Linux-Kernel)
  • Re: SATA disk reordering problem
    ... AAR-1210SA SATA HostRAID Controller. ... The Adaptec card has its BIOS ... controller seems to be found first, so the disks on the motherboard get ... assigned sda to sdf and the disk on the Adaptec gets assigned sdg. ...
    (comp.os.linux.hardware)