RE: Cannot install Webpart

Hi Woo,

If these websites is created by IIS for personal use not the default
website of SBS, you might have to manually recover the setting on IIS. We
could not do it automatically.

However, if the content of the website is put in driver D, we can just
recover the setting on IIS and point to the right directory on D.

If your website is the sub virtual directory on sharepoint, it will be
recovered by sharepoint recovery, you do not need to configure it manually.
You can refer to the sharepoint database recovery KB article in the
following sections:

829113 How to restore a Windows SharePoint Services CompanyWeb database
after
http://support.microsoft.com/?id=829113

827701 How to perform a disaster recovery operation of SharePoint Services
http://support.microsoft.com/?id=827701

Thanks for your effort in this issue. I will be here waiting for your
updates.




Best regards,

Charles Yang (MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

======================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.
======================================================
This posting is provided "AS IS" with no warranties, and confers no rights.


=====================================================
When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.
=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------
| Thread-Topic: Cannot install Webpart
| thread-index: AcWjsxZO1kNGwPSXRk64NCjxmshuUA==
| X-WBNR-Posting-Host: 219.134.29.254
| From: =?Utf-8?B?V29v?= <Woo@xxxxxxxxxxxxxxxxxxxxxxxxx>
| References: <589448FF-EE68-4083-8ADC-2F23DF113FEC@xxxxxxxxxxxxx>
<8lxEA#VnFHA.944@xxxxxxxxxxxxxxxxxxxxx>
<B6A9C732-FA12-48EE-8242-05E28274600C@xxxxxxxxxxxxx>
<B7E1HYWnFHA.3672@xxxxxxxxxxxxxxxxxxxxx>
<22CD5A37-73E3-4CA6-9E45-12155FEB0A50@xxxxxxxxxxxxx>
<uAUZsVXnFHA.940@xxxxxxxxxxxxxxxxxxxxx>
<D261E056-F06B-4A89-9D93-315CFD925E22@xxxxxxxxxxxxx>
<sJnhG5WoFHA.944@xxxxxxxxxxxxxxxxxxxxx>
<A9702DE0-7782-4089-A34C-B2D1050C6A56@xxxxxxxxxxxxx>
<rQx1B0uoFHA.3672@xxxxxxxxxxxxxxxxxxxxx>
| Subject: RE: Cannot install Webpart
| Date: Wed, 17 Aug 2005 22:10:02 -0700
| Lines: 312
| Message-ID: <72A6784D-9D2C-4316-865B-2146DACD0B74@xxxxxxxxxxxxx>
| MIME-Version: 1.0
| Content-Type: text/plain;
| charset="Utf-8"
| Content-Transfer-Encoding: 7bit
| X-Newsreader: Microsoft CDO for Windows 2000
| Content-Class: urn:content-classes:message
| Importance: normal
| Priority: normal
| X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
| Newsgroups: microsoft.public.windows.server.sbs
| NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.2.250
| Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGXA03.phx.gbl
| Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.server.sbs:145416
| X-Tomcat-NG: microsoft.public.windows.server.sbs
|
| Dear Charles
|
| Our drive C: was deleted and re-installed SBS2003. I am recovering the
| previous setting. One problem is that we have few SharePoint websites.
How
| can they be retored to current setting. Sharepoint websites were stored
in
| dirve D: in the pass. I supposed that they are still there in Drive D:
| --
| SL Woo
|
|
| ""Charles Yang [MSFT]"" wrote:
|
| > Hi Woo,
| >
| > Thanks for updates.
| >
| > After researching the error, I found a KB article which should be
helpful
| > to you:
| >
| > 249873 Explanation of Regsvr32 Usage and Error Messages
| > http://support.microsoft.com/?id=249873
| >
| > You may have to pay attention to the command you use, make sure that
you
| > include a DLL file name in the command line, if not it should be caused
by
| > the DLL files in your SBS is corrupt. You may have to copy it from CD
again
| > then register to see if the problem can be resolved.
| >
| > Thanks for understanding.
| >
| >
| >
| >
| >
| > Best regards,
| >
| > Charles Yang (MSFT)
| >
| > Microsoft CSS Online Newsgroup Support
| >
| > Get Secure! - www.microsoft.com/security
| >
| > ======================================================
| > This newsgroup only focuses on SBS technical issues. If you have issues
| > regarding other Microsoft products, you'd better post in the
corresponding
| > newsgroups so that they can be resolved in an efficient and timely
manner.
| > You can locate the newsgroup here:
| > http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
| >
| > When opening a new thread via the web interface, we recommend you check
the
| > "Notify me of replies" box to receive e-mail notifications when there
are
| > any updates in your thread. When responding to posts via your
newsreader,
| > please "Reply to Group" so that others may learn and benefit from your
| > issue.
| >
| > Microsoft engineers can only focus on one issue per thread. Although we
| > provide other information for your reference, we recommend you post
| > different incidents in different threads to keep the thread clean. In
doing
| > so, it will ensure your issues are resolved in a timely manner.
| >
| > For urgent issues, you may want to contact Microsoft CSS directly.
Please
| > check http://support.microsoft.com for regional support phone numbers.
| >
| > Any input or comments in this thread are highly appreciated.
| > ======================================================
| > This posting is provided "AS IS" with no warranties, and confers no
rights.
| >
| >
| > =====================================================
| > When responding to posts, please "Reply to Group" via your newsreader
so
| > that others may learn and benefit from your issue.
| > =====================================================
| >
| > This posting is provided "AS IS" with no warranties, and confers no
rights.
| >
| > --------------------
| > | Thread-Topic: Cannot install Webpart
| > | thread-index: AcWi1WU3RFxv1W+JRUyJDzAjc2RkWw==
| > | X-WBNR-Posting-Host: 219.134.29.30
| > | From: =?Utf-8?B?V29v?= <Woo@xxxxxxxxxxxxxxxxxxxxxxxxx>
| > | References: <589448FF-EE68-4083-8ADC-2F23DF113FEC@xxxxxxxxxxxxx>
| > <8lxEA#VnFHA.944@xxxxxxxxxxxxxxxxxxxxx>
| > <B6A9C732-FA12-48EE-8242-05E28274600C@xxxxxxxxxxxxx>
| > <B7E1HYWnFHA.3672@xxxxxxxxxxxxxxxxxxxxx>
| > <22CD5A37-73E3-4CA6-9E45-12155FEB0A50@xxxxxxxxxxxxx>
| > <uAUZsVXnFHA.940@xxxxxxxxxxxxxxxxxxxxx>
| > <D261E056-F06B-4A89-9D93-315CFD925E22@xxxxxxxxxxxxx>
| > <sJnhG5WoFHA.944@xxxxxxxxxxxxxxxxxxxxx>
| > | Subject: RE: Cannot install Webpart
| > | Date: Tue, 16 Aug 2005 19:43:05 -0700
| > | Lines: 311
| > | Message-ID: <A9702DE0-7782-4089-A34C-B2D1050C6A56@xxxxxxxxxxxxx>
| > | MIME-Version: 1.0
| > | Content-Type: text/plain;
| > | charset="Utf-8"
| > | Content-Transfer-Encoding: 7bit
| > | X-Newsreader: Microsoft CDO for Windows 2000
| > | Content-Class: urn:content-classes:message
| > | Importance: normal
| > | Priority: normal
| > | X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
| > | Newsgroups: microsoft.public.windows.server.sbs
| > | NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.2.250
| > | Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGXA03.phx.gbl
| > | Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.server.sbs:145070
| > | X-Tomcat-NG: microsoft.public.windows.server.sbs
| > |
| > | Dear Charles
| > |
| > | When I executed Regsvr32 sbsfaxrouteext.dll, it was said that
| > fxsroute.dll
| > | was loaded but the entry point of dllregisterserver was not found.
What
| > can I
| > | do ?
| > | --
| > | SL Woo
| > |
| > |
| > | ""Charles Yang [MSFT]"" wrote:
| > |
| > | > HI Woo,
| > | >
| > | > Thanks for updates.
| > | >
| > | > From your description, you encountered problem when you reinstall
fax
| > | > services on SBS.
| > | >
| > | > It seems your fax component is corrupt, can I assume that you use
| > integrate
| > | > setup to reinstall fax component on SBS 2003. If not, please follow
the
| > | > steps below to reinstall fax services component on SBS 2003, please
| > make
| > | > sure that you did not apply SBS 2003 SP1 yet, if you have already
| > applied
| > | > it please also tell us, we will give you detailed steps about how
to
| > | > reinstall fax services on SBS:
| > | >
| > | > 1. Navigate to integrate setup on control panel.
| > | > 2. Navigate to fax services then choose reinstall it.
| > | >
| > | > If the problem still exists, please make sure that fax services is
| > running,
| > | > you can check it on services console. (run services.msc on command
line)
| > | >
| > | > Please also follow the steps below to make sure that the DLL is
| > registered
| > | > successfully:
| > | >
| > | > If they're there, please bring up a command console (CMD) and run
the
| > | > following commands:
| > | >
| > | > cd /d C:\Program Files\Microsoft Windows Small Business
Server\Client
| > | > Experience\FaxRouteExt ; this will lead us to the folder directly.
| > | >
| > | > Regsvr32 sbsfaxroutesnapin.dll
| > | > Regsvr32 sbssharepoint.dll
| > | > Regsvr32 sbsfaxrouteext.dll
| > | >
| > | > Please also checked the event view to see if there are any error
event
| > in
| > | > the event view, please paste them to newsgroup. Thanks for your
effort
| > | > here.
| > | >
| > | >
| > | >
| > | > Best regards,
| > | >
| > | > Charles Yang (MSFT)
| > | >
| > | > Microsoft CSS Online Newsgroup Support
| > | >
| > | > Get Secure! - www.microsoft.com/security
| > | >
| > | > ======================================================
| > | > This newsgroup only focuses on SBS technical issues. If you have
issues
| > | > regarding other Microsoft products, you'd better post in the
| > corresponding
| > | > newsgroups so that they can be resolved in an efficient and timely
| > manner.
| > | > You can locate the newsgroup here:
| > | > http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
| > | >
| > | > When opening a new thread via the web interface, we recommend you
check
| > the
| > | > "Notify me of replies" box to receive e-mail notifications when
there
| > are
| > | > any updates in your thread. When responding to posts via your
| > newsreader,
| > | > please "Reply to Group" so that others may learn and benefit from
your
| > | > issue.
| > | >
| > | > Microsoft engineers can only focus on one issue per thread.
Although we
| > | > provide other information for your reference, we recommend you post
| > | > different incidents in different threads to keep the thread clean.
In
| > doing
| > | > so, it will ensure your issues are resolved in a timely manner.
| > | >
| > | > For urgent issues, you may want to contact Microsoft CSS directly.
| > Please
| > | > check http://support.microsoft.com for regional support phone
numbers.
| > | >
| > | > Any input or comments in this thread are highly appreciated.
| > | > ======================================================
| > | > This posting is provided "AS IS" with no warranties, and confers no
| > rights.
| > | >
| > | >
| > | > =====================================================
| > | > When responding to posts, please "Reply to Group" via your
newsreader
| > so
| > | > that others may learn and benefit from your issue.
| > | > =====================================================
| > | >
| > | > This posting is provided "AS IS" with no warranties, and confers no
| > rights.
| > | >
| > | > --------------------
| > | > | Thread-Topic: Cannot install Webpart
| > | > | thread-index: AcWhQqKKMy1DSd/ESVyjO85YT6TnIg==
| > | > | X-WBNR-Posting-Host: 219.133.117.34
| > | > | From: =?Utf-8?B?V29v?= <Woo@xxxxxxxxxxxxxxxxxxxxxxxxx>
| > | > | References: <589448FF-EE68-4083-8ADC-2F23DF113FEC@xxxxxxxxxxxxx>
| > | > <8lxEA#VnFHA.944@xxxxxxxxxxxxxxxxxxxxx>
| > | > <B6A9C732-FA12-48EE-8242-05E28274600C@xxxxxxxxxxxxx>
| > | > <B7E1HYWnFHA.3672@xxxxxxxxxxxxxxxxxxxxx>
| > | > <22CD5A37-73E3-4CA6-9E45-12155FEB0A50@xxxxxxxxxxxxx>
| > | > <uAUZsVXnFHA.940@xxxxxxxxxxxxxxxxxxxxx>
| > | > | Subject: RE: Cannot install Webpart
| > | > | Date: Sun, 14 Aug 2005 19:40:01 -0700
| > | > | Lines: 317
| > | > | Message-ID: <D261E056-F06B-4A89-9D93-315CFD925E22@xxxxxxxxxxxxx>
| > | > | MIME-Version: 1.0
| > | > | Content-Type: text/plain;
| > | > | charset="Utf-8"
| > | > | Content-Transfer-Encoding: 7bit
| > | > | X-Newsreader: Microsoft CDO for Windows 2000
| > | > | Content-Class: urn:content-classes:message
| > | > | Importance: normal
| > | > | Priority: normal
| > | > | X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
| > | > | Newsgroups: microsoft.public.windows.server.sbs
| > | > | NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.2.250
| > | > | Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGXA03.phx.gbl
| > | > | Xref: TK2MSFTNGXA01.phx.gbl
microsoft.public.windows.server.sbs:144300
| > | > | X-Tomcat-NG: microsoft.public.windows.server.sbs
| > | > |
| > | > | Dear Charles,
| > | > | Sorry have to come back to you again. Our SBS had be
re-installed.
| > The
| > | > | problem here is that fax was not routed to client. We can send
and
| > | > received
| > | > | fax. I tried to run faxcfg.exe but failed. It was said that
| > faxcfg.exe
| > | > not
| > | > | found. It is sured that fax service was selected but when I tried
to
| > run
| > | > fax
| > | > | configuration from CD3, or within Add/Remove program of Control
| > Panel, it
| > | > was
| > | > | said that fax service not installed. I tried many times to
un-install
| > fax
| > | > | service and re-install it again. Same problem there. What can you
| > think
| > | > was
| > | > | wrong ?
| > | > |
| > | > | Thanks
| > | > | --
| > | > | SL Woo
| > | > |
| > | > |
| > | > | ""Charles Yang [MSFT]"" wrote:
| > | > |
| > | > | > HI Woo,
| > | > | >
| > | > | > Thanks for your effort, If you have any further concerns relate
to
| > this
| > | > | > issue, please feel free to let me know. I am glad to help you.
| > | > | >
| > | > | >
| > | > | >
| > | > | > Best regards,
| > | > | >
| > | > | > Charles Yang (MSFT)
| > | > | >
| > | > | > Microsoft CSS Online Newsgroup Support
| > | > | >
| > | > | > Get Secure! - www.microsoft.com/security
| > | > | >
| > | > | > ======================================================
| > | > | > This newsgroup only focuses on SBS technical issues. If you
have
| > issues
| > | > | > regarding other Microsoft products, you'd better post in the
| > | > corresponding
| > | > | > newsgroups so that they can be resolved in an efficient and
timely
| > | > manner.
| > | > | > You can locate the newsgroup here:
| > | > | >
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
| > | > | >
| > | > | > When opening a new thread via the web interface, we recommend
you
| > check
| > | > the
| > | > | > "Notify me of replies" box to receive e-mail notifications when
| > there
| > | > are
| > | > | > any updates in your thread. When responding to posts via your
| > | > newsreader,
| > | > | > please "Reply to Group" so that others may learn and benefit
from
| > your
| > | > | > issue.
| > | > | >
| > | > | > Microsoft engineers can only focus on one issue per thread.
|

.

Relevant Pages

  • Re: Questions re SBS and Public Websites
    ... we can use IE to view the websites ... I have listed the Internet Explorer newsgroup below: ... Microsoft is providing this information as a convenience to you. ...
    (microsoft.public.windows.server.sbs)
  • Re: problems with recovery storage groups in Exchange 2007
    ... Regarding how to use the Microsoft Exchange Server 2007 recovery storage ... How to Recover a Mailbox by Using a Recovery Storage Group ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ...
    (microsoft.public.exchange.admin)
  • RE: Email and notes recovery
    ... If your pst file is corrupt, you can run the Inbox Repair Tool ... to recovery folders and items. ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ...
    (microsoft.public.windows.server.sbs)
  • RE: Backup Failure at Recovery Group
    ... The issue why I couldn't delete the recovery group was that I had a user ... from the Backup screen in the Server Management and it says that.. ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ...
    (microsoft.public.windows.server.sbs)
  • Re: Permissions (seperate area?)
    ... I have an issue when I select the Encrypt contents to secure data ... Recovery policy configured for this system contain invalid recovery ... Microsoft Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ...
    (microsoft.public.windows.server.sbs)