RE: CEICW hangs at Exchange - Please help... tried everything

This recently had an issue with the CEICW not completing and it was a problem
with my NIC. The integrated intel NIC seems to have cause problems for a
couple users in the past. My error was different from yours, but it may be
worth a stab to get another NIC or two to troubleshoot. I have 2 NICs and the
integrated intel one was the issue.

"Kirt" wrote:

> I have literally tried everything that exsists related to this error in the
> log from the ceicw. The only error in the log is:
>
> Error 0x1 returned from call to RegisterMSBOExchangeBP()
>
> The CEICW hangs at Exchange set up. It makes it through the first three fine.
> I have checked everything, including re-registering secatts.dll as one
> article suggested. I have tried everything in all of your posts to fix this
> problem.
> Email is not routing properly. I will sporatically get a few emails, but
> nothing like it should. Please tell me what I'm missing. --Kirt
>
.

Relevant Pages

  • Re: CEICW Network Error
    ... When running the CEICW and choosing to 'disable firewall' it failed at the 'configuring network' point. ... This puts us into a bad spot due to the lack of filtering/NAT on the router but though we have no 'firewalling' the existence of 'listening services' on the external nic can be checked using 'netstat -aon | find "external_IP"', if services are listening and we don't want them there it can be dealt with. ... This status should only exist for a short time, possibly longer if the subsequent run of the CEICW fails to enable the firewall. ... I have reviewed both NICs, binding orders, services....etc... ...
    (microsoft.public.windows.server.sbs)
  • Re: CEICW Network Error
    ... This status should only exist for a short time, possibly longer if the subsequent run of the CEICW fails to enable the firewall. ... Server service can then be told to use the router or your ISP's DNS Servers as forwarderby submitting such during the CEICW or manual adjustment, OR you can leave the DNS setting blank during CEICW and SBS DNS will resolve using 'root hints'. ... I have reviewed both NICs, binding orders, services....etc... ...
    (microsoft.public.windows.server.sbs)
  • Re: Requirements for RWW
    ... When you configure the CEICW, it configures the Window Firewall. ... NICs on the SBS box. ...
    (microsoft.public.windows.server.sbs)
  • Re: RWW 403 forbidden error
    ... Let's take a look at the CEICW log file when CEICW fails.... ... RWW still did not work. ... Just for grins and giggles I tried to start the Windows Firewall/ICS ... Not really sure where to check the binding of the NICs. ...
    (microsoft.public.windows.server.sbs)
  • Re: Problem with CEICWizard
    ... modem and is 192.168.0.1, or some such. ... CEICW, I have not run an ipconfig yet. ... Fixed IP NICs into the list. ... the LAT, and I had to add it before it go further. ...
    (microsoft.public.windows.server.sbs)