RE: Backup Wizard Error

Hello Arturo,

Just a follow up. May I know whether you have installed any third party on
the SBS 2K3 server? If yes, please perform a clean boot and see whether it
helps. The steps are:

a. Click Start->Run, type "MSCONFIG" (without the quotation marks) and
click OK.

b. In the System Configuration Utility (MSConfig) window, click the
"Startup" tab.

c. Click to clear all the check marks from the list box under "Startup".

d. Click the Services tab, check the "Hide all Microsoft Services" box and
then click the "Disable All" button to disable the non-Microsoft services.

e. Click OK to close the MSConfig window. Click Yes when you are asked to
restart your computer in order to enable the changes.

f. After restarting, please check whether this issue still exists.

If you have any updates, please feel free to let me know. I am looking
forward to your reply!

Best regards,

Brandy Nee

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security
======================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.
======================================================
This posting is provided "AS IS" with no warranties, and confers no rights.



--------------------
>Thread-Topic: Backup Wizard Error
>thread-index: AcWWzS1MZOzy33j7QuiLfadSMa2pUQ==
>X-WBNR-Posting-Host: 200.6.251.201
>From: "=?Utf-8?B?YXJ0dXJvdmFsbA==?=" <arturovall@xxxxxxxxxxxxxxxxxxxxxxxxx>
>References: <A14FB241-7211-4698-98F3-9D88B6718697@xxxxxxxxxxxxx>
<NwgPXGnlFHA.3120@xxxxxxxxxxxxxxxxxxxxx>
>Subject: RE: Backup Wizard Error
>Date: Mon, 1 Aug 2005 12:14:02 -0700
>Lines: 247
>Message-ID: <37CA38E1-2D85-4BA4-B6E4-3D598279E73C@xxxxxxxxxxxxx>
>MIME-Version: 1.0
>Content-Type: text/plain;
> charset="Utf-8"
>Content-Transfer-Encoding: 8bit
>X-Newsreader: Microsoft CDO for Windows 2000
>Content-Class: urn:content-classes:message
>Importance: normal
>Priority: normal
>X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
>Newsgroups: microsoft.public.windows.server.sbs
>NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.2.250
>Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGXA03.phx.gbl
>Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.server.sbs:140552
>X-Tomcat-NG: microsoft.public.windows.server.sbs
>
>Hello Brandy,
>
>Thank you for your reply. My answers to your questions:
>
>1) There are no error regarding the backup application, instead these are
>the following warnings (which do not come to issue with my main question,
but
>if you can help me also regarding these warnings I will appreciate it).
>-------------------------------------------------------------------------
>WARING No. 1
>Event Type: Warning
>Event Source: WinMgmt
>Event Category: None
>Event ID: 5603
>Date: 01/08/2005
>Time: 08:02:54 a.m.
>User: NT AUTHORITY\SYSTEM
>Computer: INMERKSERVER
>Description:
>A provider, PerfProv, has been registered in the WMI namespace,
>ROOT\CIMV2\MicrosoftHealthMonitor\PerfMon, but did not specify the
>HostingModel property. This provider will be run using the LocalSystem
>account. This account is privileged and the provider may cause a security
>violation if it does not correctly impersonate user requests. Ensure that
>provider has been reviewed for security behavior and update the
HostingModel
>property of the provider registration to an account with the least
privileges
>possible for the required functionality.
>
>For more information, see Help and Support Center at
>http://go.microsoft.com/fwlink/events.asp.
>-------------------------------------------------------------------------
>Warning No. 2
>Event Type: Warning
>Event Source: WinMgmt
>Event Category: None
>Event ID: 5603
>Date: 01/08/2005
>Time: 08:02:54 a.m.
>User: NT AUTHORITY\SYSTEM
>Computer: INMERKSERVER
>Description:
>A provider, PerfProv, has been registered in the WMI namespace,
>ROOT\CIMV2\MicrosoftHealthMonitor\PerfMon, but did not specify the
>HostingModel property. This provider will be run using the LocalSystem
>account. This account is privileged and the provider may cause a security
>violation if it does not correctly impersonate user requests. Ensure that
>provider has been reviewed for security behavior and update the
HostingModel
>property of the provider registration to an account with the least
privileges
>possible for the required functionality.
>
>For more information, see Help and Support Center at
>http://go.microsoft.com/fwlink/events.asp.
>-------------------------------------------------------------------------
>Warning No. 3
>Event Type: Warning
>Event Source: Perflib
>Event Category: None
>Event ID: 1016
>Date: 01/08/2005
>Time: 08:02:54 a.m.
>User: N/A
>Computer: INMERKSERVER
>Description:
>The data buffer created for the "EXOLEDB" service in the "C:\Program
>Files\Exchsrvr\bin\exodbpc.dll" library is not aligned on an 8-byte
boundary.
>This may cause problems for applications that are trying to read the
>performance data buffer. Contact the manufacturer of this library or
service
>to have this problem corrected or to get a newer version of this library.
>
>For more information, see Help and Support Center at
>http://go.microsoft.com/fwlink/events.asp.
>Data:
>0000: 9c 3e 79 00 04 15 00 00 Â?>y.....
>-------------------------------------------------------------------------
>Warning No. 4
>Event Type: Warning
>Event Source: Perflib
>Event Category: None
>Event ID: 1016
>Date: 01/08/2005
>Time: 08:02:55 a.m.
>User: N/A
>Computer: INMERKSERVER
>Description:
>The data buffer created for the "MSExchangeIS" service in the "C:\Program
>Files\Exchsrvr\bin\mdbperf.dll" library is not aligned on an 8-byte
boundary.
>This may cause problems for applications that are trying to read the
>performance data buffer. Contact the manufacturer of this library or
service
>to have this problem corrected or to get a newer version of this library.
>
>For more information, see Help and Support Center at
>http://go.microsoft.com/fwlink/events.asp.
>Data:
>0000: b0 f9 7d 00 0c 2c 00 00 °ù}..,..
>-------------------------------------------------------------------------
>
>2) Well the Backup Wizard (Server Management\Standard
>Management\Backup\Configure Backup) on SBS 2K3 server, backups the entire
>system. I cannot choose to backup specific areas.
>
>3) Yes, the system already came with Windows Small Server 2003 SP1. For
>your information, this is a new system from Dell (PowerEdge SC1420) with
>Windows SBS 2003 SP1 pre-installed.
>
>4) When entering Add or Remove Programs --> Change or Remove Programs, I
>cannot select Windows Small Business Server 2003. I think this is
because,
>the installation discs are only for a new computer. How can I re-install
the
>backup utility? If I insert the SBS 2003 discs into computer, it prompts
me
>to install SBS complete.
>
>How do I post the screenshot in this forum, so that you can understand
>better my problem? I will try sending you my screenshot via e-mail.
>
>Again thank you for your support. I look forward to your reply.
>
>Regards,
>
>Arturo Valladares
>
>""Brandy Nee [MSFT]"" wrote:
>
>> Hello,
>>
>> Thank you for posting to the SBS Newsgroup.
>>
>> I am sorry for the delayed response due to weekend. Please understand
that
>> the newsgroups are staffed weekdays by Microsoft Support professionals
to
>> answer your systems and applications questions. Your understanding is
>> greatly appreciated!
>>
>> I understand that when you were about to finish configuring the Backup
>> Wizard (Server Management\Standard Management\Backup\Configure Backup)
on
>> SBS 2K3 server, you got an error message. If I have misunderstood your
>> issue, please let me know.
>>
>> Due to lack of information for research, I need your help to gather the
>> following error logs for research:
>>
>> 1. On the server, run "eventvwr" (without quotation marks), check
whether
>> there is any error, if yes, double click it, click the Copy button and
>> paste the full content to the Newsgroup. Also, please capture a screen
shot
>> to the Newsgroup for us to better understand your issue.
>>
>> 2. I need to know what exact data information you chose to backup, is it
>> the data on Exchange server?
>>
>> 3. Have you installed any updates on your SBS 2K3 server, like SBS 2K3
SP1?
>>
>> 4. Reinstall Backup and see whether it works. To do so, please see:
>>
>> a. On the serve, run "regedit" (without quotation marks), rename
>> HKEY_LOCAL_MACHINE\software\microsoft\smallbusinessserver\backup and
>> %systemroot%\Program Files\Microsoft Small Business Server\Backup.
>>
>> b. Go to Control Panel -> Add or Remove Programs -> Change or Remove
>> Programs, select Windows Small Business Server 2003. Click
Change/Remove.
>> Run SBS integrated setup.
>>
>> c. Proceed to the Component Selection page. Select action Reinstall for
>> Server Tools. Select None for Intranet, Monitoring, Networking,
>> Administration, and Client Deployment.
>>
>> d. Reboot the server when prompted.
>>
>> e. Test the issue again.
>>
>> Please take your time to collect these error logs. If the files size is
>> large, please zip them into a compressed file and send it to my mailbox.
I
>> am appreciated your time and cooperation, and looking forward to hearing
>> from you!
>>
>> Best regards,
>>
>> Brandy Nee
>>
>> Microsoft CSS Online Newsgroup Support
>>
>> Get Secure! - www.microsoft.com/security
>> ======================================================
>> This newsgroup only focuses on SBS technical issues. If you have issues
>> regarding other Microsoft products, you'd better post in the
corresponding
>> newsgroups so that they can be resolved in an efficient and timely
manner.
>> You can locate the newsgroup here:
>> http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
>>
>> When opening a new thread via the web interface, we recommend you check
the
>> "Notify me of replies" box to receive e-mail notifications when there
are
>> any updates in your thread. When responding to posts via your
newsreader,
>> please "Reply to Group" so that others may learn and benefit from your
>> issue.
>>
>> Microsoft engineers can only focus on one issue per thread. Although we
>> provide other information for your reference, we recommend you post
>> different incidents in different threads to keep the thread clean. In
doing
>> so, it will ensure your issues are resolved in a timely manner.
>>
>> For urgent issues, you may want to contact Microsoft CSS directly.
Please
>> check http://support.microsoft.com for regional support phone numbers.
>>
>> Any input or comments in this thread are highly appreciated.
>> ======================================================
>> This posting is provided "AS IS" with no warranties, and confers no
rights.
>>
>>
>>
>> --------------------
>> >Thread-Topic: Backup Wizard Error
>> >thread-index: AcWUABrU1IXS0Fy0Qt66/SDwVqHtKg==
>> >X-WBNR-Posting-Host: 200.6.250.99
>> >From: "=?Utf-8?B?YXJ0dXJvdmFsbA==?="
<arturovall@xxxxxxxxxxxxxxxxxxxxxxxxx>
>> >Subject: Backup Wizard Error
>> >Date: Thu, 28 Jul 2005 22:41:02 -0700
>> >Lines: 11
>> >Message-ID: <A14FB241-7211-4698-98F3-9D88B6718697@xxxxxxxxxxxxx>
>> >MIME-Version: 1.0
>> >Content-Type: text/plain;
>> > charset="Utf-8"
>> >Content-Transfer-Encoding: 7bit
>> >X-Newsreader: Microsoft CDO for Windows 2000
>> >Content-Class: urn:content-classes:message
>> >Importance: normal
>> >Priority: normal
>> >X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
>> >Newsgroups: microsoft.public.windows.server.sbs
>> >NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.2.250
>> >Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGXA02.phx.gbl!TK2MSFTNGXA03.phx.gbl
>> >Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.server.sbs:139759
>> >X-Tomcat-NG: microsoft.public.windows.server.sbs
>> >
>> >While trying to configure the backup in Server Management, when
clicking
>> >finished an error appears "An unexpected error occurred (80070002) The
>> system
>> >cannot find the file specified".
>> >
>> >I run the wizard before and there were no problems, now that I am
trying
>> to
>> >modify my pre-existing configuration of the backup this error appears.
>> Also,
>> >I do not have the option to choose to reserve space for deleted items
and
>> to
>> >retain deleted e-mails, before this problem occured I did had the this
>> option
>> >available.
>> >
>> >Please help. Thanks
>> >
>>
>>
>

.

Loading