Re: Drive image



Steven,

Based on your previous post, you only have 1 server and a couple of clients;
so I would attach the external to each machine that you were imaging, and
give each image an appropriate name corresponding to the computer being
imaged.

I think that network coping is supported but not sure, and with so few pc’s
to image, probably not worth the aggravation setting it up for that anyway.

This utility has a nifty feature that allows you to create an emergency boot
partition, and store the image in it. As long as the drive is intact, you
can have a computer back to that state in about 15mins or less.

--
R. Seiler


"Steven" wrote:

> Hi
>
> Thanks
>
> any suggestions on where to attach the external drive (sevrer or desktop)
>
>
> "RSeiler" <info@xxxxxxxxxxxxxxxxxx> wrote in message
> news:895374A7-E297-4D40-8E26-69AE676F1C8A@xxxxxxxxxxxxxxxx
> > Steven,
> >
> > Chack out 'Acronis True Image 8.0' from http://www.acronis.com/.
> > I have been checking it out for a while and like it very much. I think
> > you
> > will find that this software will do what you want.
> >
> > After you install it on a computer, you can create a boot CD. Then you
> > can
> > use the boot CD to boot the other pc's and run the utility "outside" of
> > the
> > installed OS; then create an image of the dirve(s). You can direct the
> > images to a directory on a external drive. Then store the boot CD and
> > the
> > external drive in a safe place and "BAM" - poor man's bare metal full
> > system
> > restore.
> >
> > Hope this helps you out.
> > --
> > R. Seiler
> >
> >
> > "Steven" wrote:
> >
> >> Hi
> >>
> >> If i was to do a drive image from 3 desktops and 1 sbs server to a
> >> external
> >> hardware would i be better to:
> >>
> >> 1. Use USB2/Firewire
> >> 2. Use IDE or SATA hard drive
> >> 3. Connect the xternal hard drive to the server or to a desktop
> >> 4. What drive image software would you use for this.
> >>
> >>
> >>
> >> Thanks
> >>
> >> Steven
> >>
> >>
> >>
>
>
>
.



Relevant Pages

  • Re: SCO 5.0.4/5 stops at boot: prompt on a fresh install in a VMware workstation
    ... every time I try and boot the VM it stops at the boot: ... I haven't tried that, but will do so once this server build is done, ... to install on VMware ESX. ... expect the kernel might get upset, or maybe the licence will stop ...
    (comp.unix.sco.misc)
  • Re: Transferring SCO Drive to Another Server
    ... >>I need to mount it in another server. ... I'll install any OS you can suggest in order to get ... Does the machine boot? ...
    (comp.unix.sco.misc)
  • Re: Installation Woes from MSDN DVD
    ... > Have been given a MSDN DVD containing ISO image of Windows 2000 Advanced ... > server to install on a development box, but it only has CD capability. ... > my instructions read "DO NOT Press any key to boot from CD" ...
    (microsoft.public.win2000.advanced_server)
  • Re: installing Ubuntu via PXE using tftpd32
    ... If possible, boot from CD-ROM or DVD, and install from there! ... turned off the windows firewall and the routers own DHCP server. ... Are you wanting to do a PXE install over a wireless LAN? ...
    (comp.os.linux.setup)
  • Re: Please Help: acpitabl.dat
    ... Matt ... >> after the install which went without issue, the server will not boot. ...
    (microsoft.public.windows.server.sbs)