Re: isa 2004 on sbs premium

Success! Am sorting through a couple of things ...but all in all it was a
simple to do install. My ISA 2004 install was not on top of ISA 2000. The
result of running the CEICW is that some 20 firewall rules are configured.
I've read that upgrading from ISA 2000 brings the rules over. Remember if
things don't work you can always rerun the CEICW to set things back in order.
If your suspect your custom rules are interfering with your desired results
your could save them as a ISA backup and then remove them run CEICW and test.

Good luck - Dale

"param@xxxxxxxxxxxxxxxx" wrote:

> So you had a success I am presuming? What about all the existing rules and
> settings? Do those move over? I have customized some ISA rules over and
> above what the wizards did for me.
>
> Thanks!
>
> "Dale Networkguy" <DaleNetworkguy@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
> message news:1AB146E9-8249-4450-8FCF-D07FC58CBB8D@xxxxxxxxxxxxxxxx
> > the quick answer is: you have to have SBS SP1 installed for the ISA 2004
> > component provided on the SP1 CD media to install.
> >
> > It will give you a message stating this fact if you try to install it sans
> > SP1. I know cause I tried this on my test lab that I wanted to simply get
> > a
> > quick look at the firewall and see how much of my system drive space would
> > get used up.
> >
> > *borrows Susan's 2x4 to whack you guys for wandering responses*
> >
> > "param@xxxxxxxxxxxxxxxx" wrote:
> >
> >> Has anyone been able to install ISA 2004 successfully on SBS Premium
> >> non-SP1
> >> machine? Or is SBS SP1 required?
> >>
> >> TIA!
> >>
> >>
> >>
>
>
>
.

Relevant Pages

  • RE: ISA 2004
    ... you would better to wait the router and then run CEICW to ... install the other software. ... How to configure networks in ISA Server 2004 ... ISA Server 2004 Performance Best Practices ...
    (microsoft.public.windows.server.sbs)
  • ISA 2004 upgrade fails
    ... I am having problems when updating to ISA 2004, the install goes fine until ... If I try and run the CEICW after the ... install completes it fails as soon as it goes to commit the changes. ...
    (microsoft.public.windows.server.sbs)
  • Re: Instructions for installing ISA with SBS 2003
    ... CEICW the job is done for you. ... Restart the server and then open ISA ... Management console and Look at Destination Sets and be sure that Remote Web ... > directions just beyond the ISA install what do I do then. ...
    (microsoft.public.windows.server.sbs)
  • Re: SP1 - a good thing? Spoke to soon....
    ... Run the CEICW and there is no such thing as a 'hacked' system. ... So far what I have found is first off the install is 4 hours even on a fast ... Australia so back into ISA and the connection wizard I go I guess. ...
    (microsoft.public.windows.server.sbs)
  • Re: Changing ISPs
    ... Run the CEICW, Connect the router, change the LAN NIC by running the change ... Then install the edge device but leave ISA in place. ... SMTP mail for Exchange ... removed his e-mail account in Outlook and reinstalled and still no luck. ...
    (microsoft.public.windows.server.sbs)